Lindy 38084 User Manual

Page 1
Tested to comply with FCC Standards For Home and Office Use!
4x2 HDMI 2.0 18G Matrix Switch
User Manual English Benutzerhandbuch Deutsch Manuel Utilisateur Français Manuale Italiano
No. 38084
© LINDY Group - FIRST EDITION (December 2018)
Page 2
Page 3
User Manual English
Introduction
Thank you for purchasing the Lindy 4x2 HDMI 2.0 18G Matrix Switch. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
This matrix is a high performance solution for distributing content from multiple source devices to two displays. Supporting HDMI 2.0 18G signals, this matrix allows for the transmission of clear 4K Ultra HD 60Hz resolutions, while additional support for High Dynamic Range ensures video content can be seen with enhanced brightness, greater contrasts and a much wider colour gamut, perfect for digital signage displays in retail or hospitality or creating engaging educational setups.
Package Contents
HDMI Matrix IR Remote Control and CR 2025 Battery Multi-country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm 2 x Mounting Brackets This Manual
Features
HDMI 2.0 18Gbps, HDCP 2.2 Compliant Supports resolutions up to 3840x2160@60Hz 4:4:4 8bit, with HDR support Supports pass-through HDMI audio up to 7.1CH Audio extraction from Output A to Toslink (Optical) and 3.5mm Analogue Audio Automatic downscaling from Output B – 4K to 1080p EDID Management Control switching via push buttons on the unit and IR remote
Specification
Input: 4 x HDMI Type A (Female), IR Receiver Output: 2 x HDMI Type A (Female), 3.5mm Stereo Audio (Female), Toslink Optical (Female) Metal Housing Operating Temperature: 0°C - 40°C (32°F - 104°F) Storage Temperature: -20°C - 60°C (-4°F - 140°F) Humidity: 20 - 90% RH (non-condensing) Power Requirements: 5VDC 1A
Installation
Please ensure all devices are switched off before making any connections. Connect the source devices such as a PC, Blu-ray player or games console to the HDMI matrix input ports.
Then connect the high definition displays to the HDMI matrix output ports. When all the connections are made, connect the power supplies.
Once all the connections have been made, switch on the devices in this order: displays, HDMI Matrix, source devices. Please allow a few minutes for the devices to handshake and for the signals to appear.
Page 4
User Manual English
Number
Name
Function
1
IR
IR Receiver Sensor
2
Power LED
Power LED Indicator
3
Output A LED
The selected input channel will illuminate for Output A
4
Output B LED
The selected input channel will illuminate for Output B
5
Output A Button
Select the input channel for Output A
6
Output B Button
Select the input channel for Output B
7
EDID
EDID management to select the output video and audio signal
Number
Name
Function
1
Input Ports
Connect to a HDMI source device
2
Output A
Connect to a HDMI display
3
Output B
Connect to a HDMI display
4
Toslink (Optical) Output
Extract audio from Output A to Toslink (Optical) audio
5
3.5mm Stereo Output
Extract audio from Output A to 3.5mm Stereo Analogue audio
6
Service
For firmware updates
7
DC 5V
Connect to 5VDC 1A Power Supply
Operation
Front of Unit
Rear of Unit
Page 5
User Manual English
EDID Mode
EDID Function
0000
AUTO (EDID Pass-through)
0001
Copy EDID of HDMI Output A
0010
Copy EDID of HDMI Output B
0011
720, 60Hz, 4:4:4, 8bit, 2 Channel Audio, 24-bit, 48KHz, No formats.
0100
1920x1080, 60Hz, 4:4:4, 8bit. 2 Channel Audio, 24-bit, 48kHz. No formats.
0101
1920x1080, 60Hz, 4:4:4, 8bit. 6 Channel Audio, 24-bit, 192Khz. Dolby Digital and DTS­Audio
0110
1920x1080, 60Hz, 4:4:4, 8bit. 8 Channel Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital
0111
3840x2160, 30Hz, 4:4:4, 8bit. 2 Channel Audio, 24-bit, 48Khz. No formats.
1000
3840x2160, 30Hz, 4:4:4, 8bit. 6 Channel Audio, 24-bit, 192Khz. Dolby Digital and DTS­Audio
1001
3840x2160, 30Hz, 4:4:4, 8bit. 8 Channel Audio, 24-bit, 192Khz. DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1010
3840x2160, 60Hz, 4:2:0, 8bit. 2 Channel Audio, 24-bit, 48Khz. No formats.
1011
3840x2160, 60Hz, 4:2:0, 8bit. 6 Channel Audio, 24-bit, 192Khz. Dolby Digital and DTS­Audio
1100
3840x2160, 60Hz, 4:2:0, 8bit. 8 Channel Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1101
3840x2160, 60Hz, 4:4:4, 8bit. 2 Channel Audio, 24-bit, 48Khz, No formats.
1110
3840x2160, 60Hz, 4:4:4, 8bit. 6 Channel Audio, 24-bit, 192Khz, Dolby Digital and DTS Audio.
1111
3840x2160, 60Hz, 4:4:4, 8bit. 8 Channel Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1
Select the Input for Output A
2
Select the last or next Input for Output A
3
Select the Input for Output B
4
Select the last or next Input for Output B
EDID Management
IR Remote Control
Page 6
Benutzerhandbuch Deutsch
Einführung
Wir freuen uns, dass Ihre Wahl auf ein LINDY-Produkt gefallen ist und danken Ihnen für Ihr Vertrauen. Sie können sich jederzeit auf unsere Produkte und einen guten Service verlassen. Dieser 4x2 HDMI 2.0 18G Matrix Switch unterliegt einer 2-Jahres LINDY Herstellergarantie und lebenslangem kostenlosen, technischen Support. Bitte lesen Sie diese Anleitung sorgfältig und bewahren Sie sie auf.
Diese Matrix ist eine leistungsstarke Lösung zum Verteilen von Inhalten mehrerer Quellen auf zwei Displays. Durch die Unterstützung von HDMI 2.0 18G Signalen erlaubt diese Matrix die Übertragung klarer 4K Ultra HD 60Hz Auflösungen. High Dynamic Range sorgt dafür, dass Videoinhalte mit höherer Helligkeit, verbessertem Kontrast und einer breiteren Farbtiefe wiedergegeben werden - perfekt für Digital Signage Displays im Einzelhandel, im Gastgewerbe oder für ansprechende Schulungsinstallationen.
Lieferumfang
HDMI Matrix IR-Fernbedienung und CR2025 Batterie Multi-Country Netzteil (UK, EU, US & AUS), DC-Stecker: 5.5/2.1mm 2 x Montagehalterung Dieses Handbuch
Eigenschaften
HDMI 2.0 18Gbit/s, kompatibel mit HDCP 2.2 Unterstützt Auflösungen bis 3840x2160@60Hz 4:4:4 8Bit inklusive HDR Unterstützt HDMI Audio Pass-through bis 7.1-Kanal Audioextraktion von Ausgang A auf Toslink (optisch) und 3.5mm analoges Audio Automatisches Herunterskalieren von Ausgang B – 4K auf 1080p EDID-Management Steuerung durch Tasten am Gerät und Fernbedienung
Spezifikationen
Eingang: 4 x HDMI Typ A (Buchse), IR Receiver Ausgang: 2 x HDMI Typ A (Buchse), 3.5mm Stereo-Audio (Buchse), Toslink - optisch (Buchse) Metallgehäuse Betriebstemperatur: 0°C - 40°C (32°F - 104°F) Lagertemperatur: -20°C - 60°C (-4°F - 140°F) Feuchtigkeit: 20 - 90% RH (nicht-kondensierend) Leistungsaufnahme: 5VDC 1A
Installation
Stellen Sie zunächst sicher, dass alle Geräte ausgeschaltet sind, bevor Anschlüsse vorgenommen werden. Verbinden Sie die Quellgeräte wie PC, Blu-ray Player oder Spielekonsolen mit den Eingangsports der HDMI Matrix. Schließen Sie dann die hochauflösenden Displays an den Ausgangsports der HDMI Matrix an und zum Schluss die Netzteile. Wenn alle Geräte angeschlossen sind, schalten Sie diese in folgender Reihenfolge ein: Displays, HDMI Matrix, Quellgeräte. Der Handshake der Geräte dauert einige Minuten, dann erscheinen auch die Signale.
Page 7
Benutzerhandbuch Deutsch
Number
Name
Function
1
IR
IR Receiver Sensor
2
Power LED
Power LED Anzeige
3
LED Ausgang A
Ausgewählter Eingabekanal für Ausgang A leuchtet auf
4
LED Ausgang B
Ausgewählter Eingabekanal für Ausgang B leuchtet auf
5
Taste Ausgang A
Auswahl des Eingangskanals für Ausgang A
6
Taste Ausgang B
Auswahl des Eingangskanals für Ausgang B
7
EDID
EDID Management zur Auswahl des Video- & Audioausgabesignals
Number
Name
Function
1
Eingabeports
Zum Anschluss von HDMI-Quellgeräten
2
Ausgang A
Zum Anschluss eines HDMI Displays
3
Ausgang B
Zum Anschluss eines HDMI Displays
4
Toslink (optischer)
Ausgang
Extrahiert Audio aus Ausgang A und gibt es als Toslink
(optisches) Audio aus
5
3.5mm Stereo Ausgang
Extrahiert Audio aus Ausgang A und gibt es als 3.5mm
analoges Stereo-Audio aus
6
Service
Für Firmwareupdates
7
DC 5V
Zum Anschluss eines 5VDC 1A Netzteils
Betrieb
Vorderseite
Rückseite
Page 8
Benutzerhandbuch Deutsch
EDID Modus
EDID Funktion
0000
Automatisch (EDID Pass-Through)
0001
Kopiert EDID von HDMI-Ausgang A
0010
Kopiert EDID von HDMI-Ausgang B
0011
720, 60Hz, 4:4:4, 8Bit. 2-Kanal-Audio, 24Bit, 48KHz, keine Formate gefunden.
0100
1920x1080, 60Hz, 4;4:4, 8Bit. 2-Kanal-Audio, 24Bit, 4KHz. Keine Formate gefunden.
0101
1920x1080, 60Hz, 4:4:4, 8Bit. 6-Kanal-Audio, 24Bit, 192KHz. Dolby Digital und DTS­Audio
0110
1920x1080, 60Hz, 4:4:4, 8Bit. 8-Kanal-Audio, 24Bit, 192KHz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital
0111
3840x2160, 30Hz, 4:4:4, 8Bit. 2-Kanal-Audio, 24Bit, 48KHz. Keine Formate gefunden.
1000
3840x2160, 30Hz, 4:4:4, 8Bit. 6-Kanal-Audio, 24Bit, 192KHz. Dolby Digital und DTS­Audio
1001
3840x2160, 30Hz, 4:4:4, 8Bit. 8-Kanal-Audio, 24Bit, 192KHz. DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1010
3840x2160, 60Hz, 4:2:0, 8Bit. 2-Kanal-Audio, 24Bit, 48KHz. Keine Formate gefunden.
1011
3840x2160, 60Hz, 4:2:0, 8Bit. 6-Kanal-Audio, 24Bit, 192KHz. Dolby Digital und DTS­Audio
1100
3840x2160, 60Hz, 4:2:0, 8Bit. 8-Kanal-Audio, 24Bit, 192KHz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1101
3840x2160, 60Hz, 4:4:4, 8Bit. 2-Kanal-Audio, 24Bit, 48KHz, keine Formate gefunden.
1110
3840x2160, 60Hz, 4:4:4, 8Bit. 6-Kanal-Audio, 24Bit, 192KHz, Dolby Digital und DTS Audio.
1111
3840x2160, 60Hz, 4:4:4, 8Bit. 8-Kanal-Audio, 24Bit, 192KHz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1
Auswahl des Eingangs für Ausgang A
2
Auswahl des vorherigen oder nächsten Eingangs für Ausgang A
3
Auswahl des Eingangs für Ausgang B
4
Auswahl des vorherigen oder nächsten Eingangs für Ausgang B
EDID Management
IR-Fernbedienung
Page 9
Manuel Utilisateur Français
Introduction
Nous sommes heureux que votre choix se soit porté sur un produit LINDY et vous remercions de votre confiance. Vous pouvez compter à tout moment sur la qualité de nos produits et de notre service. Ce
Switch Matrix 4x2 HDMI 2.0 18G est soumis à une durée de garantie LINDY de 2 ans et d’une
assistance technique gratuite à vie. Merci de lire attentivement ces instructions et de les conserver pour future référence.
Cette matrice HDMI est une solution hautes performances pour distribuer les contenus de plusieurs sources sur deux affichages. Prenant en charge les signaux HDMI 2.0 18G, cette matrice permet la transmission de résolutions 4K Ultra HD 60Hz, avec une prise en charge additionnelle de l’HDR (High Dynamic Range) qui garantit que le contenu vidéo est visible avec une luminosité améliorée, des contrastes plus importants et une gamme de couleurs beaucoup plus large, idéal pour les solutions Digital Signage dans la vente au détail, l’hôtellerie ou la création de configurations éducatives attrayantes.
Contenu de l’emballage
Matrice HDMI Télécommande IR et pile CR2025 Alimentation multi-pays (UK, EU, US & AUS), prise DC: 5.5/2.1mm 2 x équerres de montage Ce manuel
Caractéristiques
Conforme HDMI 2.0 18Gbit/s, HDCP 2.2 Prend en charge les résolutions jusqu’à 3840x2160@60Hz 4:4:4 8bit, avec HDR Prise en charge HDMI audio pass-through jusqu’à 7.1CH Extraction audio de la sortie A vers Toslink (optique) et 3.5mm audio analogique Downscaling automatique sur la sortie B – 4K vers 1080p Gestion EDID Contrôle de commutation par boutons poussoirs sur l’unité et à l’aide de la télécommande IR
Spécifications
Entrées: 4 x HDMI Type A (femelle), capteur IR Sorties: 2 x HDMI Type A (femelle), 3.5mm audio stéréo (femelle), Toslink optique (femelle) Boitier métallique Température de fonctionnement: 0°C - 40°C (32°F - 104°F) Température de stockage: -20°C - 60°C (-4°F - 140°F) Humidité relative: 20 - 90% RH (sans condensation) Alimentation: 5VDC 1A
Installation
Merci de vous assurer que tous les appareils sont hors tension avec d’effectuer les connexions. Connectez les sources tel qu’un PC, lecteur Blu-ray ou console de jeu aux ports d’entrée HDMI de la
matrice. Connectez ensuite les affichages hautes définitions aux ports de sortie de la matrice HDMI. Lorsque toutes les connexions sont effectuées, alimentez les appareils.
Pour finir, démarrez les appareils dans l’ordre suivant: affichages, matrice HDMI, appareils sources.
Veuillez patienter quelques minutes pour que les appareils s’apparient et que les signaux apparaissent.
Page 10
Manuel Utilisateur Français
Num.
Nom
Fonction
1
IR
Capteur IR
2
Power LED
LED indicatrice d’alimentation
3
Output A LED
L’entrée sélectionnée s’allume pour la sortie (Output) A
4
Output B LED
L’entrée sélectionnée s’allume pour la sortie (Output) B
5
Bouton Output A
Sélectionne l’entrée pour la sortie A
6
Bouton Output B
Sélectionne l’entrée pour la sortie B
7
EDID
Gestion EDID pour sélectionner les signaux de sortie vidéo et audio
Num.
Nom
Fonction
1
Ports en entrée
Connecte les sources HDMI
2
Sortie (Output) A
Connecte un affichage HDMI
3
Sortie B
Connecte un affichage HDMI
4
Sortie Toslink (optique)
Extrait l’audio de la sortie A en audio Toslink (optique)
5
Sortie 3.5mm stéréo
Extrait l’audio de la sortie A en 3.5mm stéréo analogique
6
Service
Pour la mise à jour du firmware
7
DC 5V
Connecte l’alimentation 5VDC 1A
Utilisation
Panneau avant
Panneau arrière
Page 11
Manuel Utilisateur Français
Mode EDID
Fonction EDID
0000
AUTO (EDID Pass-through)
0001
Copie de l'EDID de la sortie HDMI A
0010
Copie de l'EDID de la sortie HDMI B
0011
720, 60Hz, 4:4:4, 8bit. 2 Channel Audio, 24-bit, 48Khz, sans formats
0100
1920x1080, 60Hz, 4;4:4, 8bit. 2 Channel Audio, 24-bit, 4khz. sans formats.
0101
1920x1080, 60Hz, 4:4:4, 8bit. 6 Channel Audio, 24-bit, 192Khz. Dolby Digital and DTS­Audio
0110
1920x1080, 60Hz, 4:4:4, 8bit. 8 Channel Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital
0111
3840x2160, 30Hz, 4:4:4, 8bit. 2 Channel Audio, 24-bit, 48Khz. sans formats
1000
3840x2160, 30Hz, 4:4:4, 8bit. 6 Channel Audio, 24-bit, 192Khz. Dolby Digital and DTS­Audio
1001
3840x2160, 30Hz, 4:4:4, 8bit. 8 Channel Audio, 24-bit, 192Khz. DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1010
3840x2160, 60Hz, 4:2:0, 8bit. 2 Channel Audio, 24-bit, 48Khz. sans formats.
1011
3840x2160, 60Hz, 4:2:0, 8bit. 6 Channel Audio, 24-bit, 192Khz. Dolby Digital and DTS­Audio
1100
3840x2160, 60Hz, 4:2:0, 8bit. 8 Channel Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1101
3840x2160, 60Hz, 4:4:4, 8bit. 2 Channel Audio, 24-bit, 48Khz, sans formats.
1110
3840x2160, 60Hz, 4:4:4, 8bit. 6 Channel Audio, 24-bit, 192Khz, Dolby Digital and DTS Audio.
1111
3840x2160, 60Hz, 4:4:4, 8bit. 8 Channel Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1
Sélectionne l’entrée pour Output A
2
Sélectionne l’entrée précédente ou suivante pour Output A
3
Sélectionne l’entrée pour Output B
4
Sélectionne l’entrée précédente ou suivante pour Output B
EDID Management
Télécommande IR
Page 12
Manuale Italiano
Introduzione
Vi ringraziamo per aver acquistato il Matrix Switch 4x2 HDMI 2.0 18G Lindy. Questo prodotto è stato progettato per garantirvi la massima affidabilità e semplicità di utilizzo ed è coperto da 2 anni di garanzia LINDY oltre che da un servizio di supporto tecnico a vita. Per assicurarvi di farne un uso corretto vi invitiamo a leggere attentamente questo manuale e a conservarlo per future consultazioni.
Questa matrice è una soluzione ad alte prestazioni per distribuire i contenuti generati da più sorgenti su due schermi. Grazie al supporto di segnali HDMI 2.0 18G questa matrice consente di trasmettere immagini con risoluzione 4K Ultra HD 60Hz mentre il supporto per High Dynamic Range (HDR) assicura la riproduzione di video con luminosità avanzata, contrato più elevato e una profondità colore più ampia rendendola perfetta per l’utilizzo con schermi per digital signage in installazioni di grande impatto per il mercato retail, alberghiero e scolastico.
Contenuto della confezione
Matrice HDMI Telecomando IR con batteria CR2025 Alimentatore Multi-country (UK, EU, US & AUS) con connetore DC da 5.5/2.1mm 2 x Staffe di montaggio Questo manuale
Caratteristiche
Conforme alle specifiche HDMI 2.0 18Gbps, HDCP 2.2 Supporto risoluzioni fino a 3840x2160@60Hz 4:4:4 8bit con HDR Supporto Audio HDMI 7.1 canali in modalità pass-through Estrazione Audio dall’uscita Output A alla porta Toslink (Ottica) e Audio Analogico 3.5mm Riduzione risoluzione (Downscaling) automatica sull’uscita B da 4K a 1080p Gestione EDID Controllo commutazione tramite i pulsanti sull’unità o via telecomando
Specifiche
Ingressi: 4 x HDMI Tipo A (Femmina), Ricevitore IR Uscite: 2 x HDMI Tipo A (Femmina), Audio Stereo 3.5mm (Femmina), Toslink Ottico (Femmina) Telaio in metallo Temperatura operativa: 0°C - 40°C (32°F - 104°F) Temperatura di immagazzinamento: -20°C - 60°C (-4°F - 140°F) Umidità: 20 - 90% RH (senza condensa) Alimentazione: 5VDC 1A
Installazione
Assicuratevi che tutti i dispositivi siano spenti prima di effettuare qualsiasi connessione. Collegate i dispositivi sorgente come PC, Blu-ray o console di gioco agli ingressi HDMI della matrice. Collegate poi gli schermi ad alta definizione alle uscite della matrice. Dopo aver terminato tutte le connessioni collegate anche l’alimentatore. A questo punto potete procedere con l’avvio di tutti i dispositivi in questo ordine: Schermi, Matrice HDMI e infine le sorgenti. Vi preghiamo di attendere qualche minuto per consentire a tutti i dispositivi di inizializzarsi. Terminata questa fase su tutti gli schermi appariranno le immagini della sorgente selezionata.
Page 13
Manuale Italiano
Numero
Nome
Funzione
1
IR
Sensore IR ricevitore
2
LED Power
LED Indicatore dell’alimentazione
3
LED Uscita A
L’ingresso selezionato si illuminerà per l’uscita A
4
LED Uscita B
L’ingresso selezionato si illuminerà per l’uscita B
5
Pulsante Uscita A Selezione il canale in ingresso per l’uscita A
6
Pulsante Uscita B Selezione il canale in ingresso per l’uscita B
7
EDID
Gestione EDID per selezionare la modalità di funzionamento dell’uscita
audio/video
Numero
Nome
Funzione
1
Ingressi
Connect to a HDMI source device
2
Uscita A
Connect to a HDMI display
3
Uscita B
Connect to a HDMI display
4
Uscita Toslink (Ottica)
Estrae audio dall’Uscita A alla porta Toslink (Ottica)
5
Uscita Stereo 3.5mm
Estrae audio dall’Uscita A alla porta Audio Stereo 3,5mm
6
Service
Porta per aggiornamento firmware
7
DC 5V
Connettore per l’alimentatore 5VDC 1A
Utilizzo
Pannello frontale
Pannello posteriore
Page 14
Manuale Italiano
Modalità EDID
Funzione EDID
0000
AUTO (EDID Passante)
0001
Copia EDID della porta HDMI Output A
0010
Copia EDID della porta HDMI Output B
0011
720, 60Hz, 4:4:4, 8bit. 2 Canali Audio, 24-bit, 48Khz, Nessun formato trovato
0100
1920x1080, 60Hz, 4;4:4, 8bit. 2 Canali Audio, 24-bit, 4khz. Nessun formato trovato
0101
1920x1080, 60Hz, 4:4:4, 8bit. 6 Canali Audio, 24-bit, 192Khz. Dolby Digital e DTS­Audio
0110
1920x1080, 60Hz, 4:4:4, 8bit. 8 Canali Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital
0111
3840x2160, 30Hz, 4:4:4, 8bit. 2 Canali Audio, 24-bit, 48Khz. Nessun formato trovato
1000
3840x2160, 30Hz, 4:4:4, 8bit. 6 Canali Audio, 24-bit, 192Khz. Dolby Digital e DTS­Audio
1001
3840x2160, 30Hz, 4:4:4, 8bit. 8 Canali Audio, 24-bit, 192Khz. DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1010
3840x2160, 60Hz, 4:2:0, 8bit. 2 Canali Audio, 24-bit, 48Khz. Nessun formato trovato
1011
3840x2160, 60Hz, 4:2:0, 8bit. 6 Canali Audio, 24-bit, 192Khz. Dolby Digital e DTS­Audio
1100
3840x2160, 60Hz, 4:2:0, 8bit. 8 Canali Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1101
3840x2160, 60Hz, 4:4:4, 8bit. 2 Canali Audio, 24-bit, 48Khz, Nessun formato trovato
1110
3840x2160, 60Hz, 4:4:4, 8bit. 6 Canali Audio, 24-bit, 192Khz, Dolby Digital e DTS Audio.
1111
3840x2160, 60Hz, 4:4:4, 8bit. 8 Canali Audio, 24-bit, 192Khz, DTS Audio, Dolby Digital Plus, DTS-HD, Dolby True HD, Dolby Digital.
1
Selezione ingresso per Uscita A
2
Seleziona l’ingresso successivo o precedente per l’Uscita A
3
Selezione ingresso per Uscita B
4
Seleziona l’ingresso successivo o precedente per l’Uscita B
Gestione EDID
Telecomando IR
Page 15
CE/FCC Statement
CE Certification
This equipment complies with the requirements relating to Electromagnetic Compatibility Standards. It has been manufactured under the scope of RoHS compliance.
CE Konformitätserklärung
Dieses Produkt entspricht den einschlägigen EMV Richtlinien der EU für IT-Equipment und darf nur zusammen mit abgeschirmten Kabeln verwendet werden. Diese Geräte wurden unter Berücksichtigung der RoHS Vorgaben hergestellt. Die formelle Konformitätserklärung können wir Ihnen auf Anforderung zur Verfügung stellen
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. You are cautioned that changes or modification not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
LINDY Herstellergarantie – Hinweis für Kunden in Deutschland
LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine zweijährige Hersteller­garantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website aufgelistet bei den AGBs.
Hersteller / Manufacturer (EU):.
LINDY-Elektronik GmbH LINDY Electronics Ltd Markircher Str. 20 Sadler Forster Way 68229 Mannheim Stockton-on-Tees, TS17 9JY Germany England Email: info@lindy.com , T: +49 (0)621 470050 postmaster@lindy.co.uk , T: +44 (0)1642 754000
Page 16
Recycling Information
Tested to comply with FCC Standards For Home and Office Use!
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
Germany / Deutschland Rücknahme Elektroschrott und Batterie-Entsorgung
Die Europäische Union hat mit der WEEE Direktive Regelungen für die Verschrottung und das Recycling von Elektro­und Elektronikprodukten geschaffen. Diese wurden im Elektro- und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt. Das Entsorgen von Elektro- und Elektronikgeräten über die Hausmülltonne ist verboten! Diese Geräte müssen den Sammel- und Rückgabesystemen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren Recyclingprozess übernehmen die Gerätehersteller. LINDY bietet deutschen Endverbrauchern ein kostenloses Rücknahmesystem an, beachten Sie bitte, dass Batterien und Akkus den Produkten vor der Rückgabe an das Rücknahmesystem entnommen werden müssen und über die Sammel- und Rückgabesysteme für Batterien separat entsorgt werden müssen. Ausführliche Informationen zu diesen Themen finden Sie stets aktuell auf der LINDY Webseite im Fußbereich.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières
légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques ou électroniques de votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici ed
elettronici. Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni stato
membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio
Stato quando si dispone di un apparecchio elettrico o elettronico. Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
No. 38084
1st Edition, December 2018
lindy.com
Loading...