LINDY 38049 User Manual [ml]

4x2 4K HDMI Matrix

Manual English
Benutzerhandbuch Deutsch
Manuel Français
Manuale Italiano

LINDY No. 38049

www.lindy.com

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (July 2014)

Manual English

Introduction

Thank you for purchasing the LINDY 4K HDMI 4x2 Matrix with remote control. This high performance HDMI Matrix
allows any of the attached four sources to be show on any of the two displays simultaneously. An Infra-red remote
control is supplied to make switching between sources and displays easier.

Package Contents

 HDMI 4x2 4K Matrix
 5V DC 1A Multi Country PSU
 Remote control
 This manual

Features

 Supports display resolutions up to 4Kx2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz
 3D HDMI 1.4a video format support
 3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock
 Supports deep colour up to 48-bit per pixel
 HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT)
 Supports the reception of any audio data conforming to the HDMI specification 1.4 such as LPCM at up to

192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR

 Full colorimetric including sYCC601, Adobe RGB, Adobe YCC601,xvYCC extended gamut colour
 Operates for TMDS clock frequencies up to 300MHz

Specification

 Input Ports: 4 x HDMI Female
 Output Ports: 2 x HDMI Female
 Power Supply: 5V DC 1A
 Dimensions: 85 x 192 x 26mm (WxDxH)
 Weight: 450g
 Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F
 Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F
 Relative Humidity: 20 ~ 90% RH (Non-condensing)
 Power Consumption: 5W Max

Operation

Front Panel

1. ON/OFF: Power on/off switch

2. POWER LED: This red LED illuminates when the device is connected with a power supply

3. IR IN: Remote control signal receive

4. OUTPUT A: Press this button to select the input source to HDMI OUT A. The LED will illuminate to show
the input selected

Manual English

Number

EDID Selector

Description 1 0000

1080P,Stereo Audio 2.0

2

0001

1080P,Dolby/DTS 5.1

3

0010

1080P,HD Audio 7.1

4

0011

1080I,Stereo Audio 2.0

5

0100

1080I,Dolby/DTS 5.1

6

0101

1080I,HD Audio 7.1

7

0110

3D,Stereo Audio 2.0

8

0111

3D,Dolby/DTS 5.1

9

1000

3D,HD Audio 7.1

10

1001

4K2K,Stereo Audio 2.0

11

1010

4K2K,Dolby/DTS 5.1

12

1011

4K2K,HD Audio 7.1

13

1100

Reserve

14

1101

Reserve

15

1110

Reserve

16

1111

Auto mode(default)

5. OUTPUT B: Press this button to select the input source to HDMI OUT B. The LED will illuminate to show
the input selected

6. EDID Selector: Use the chart below to select the EDID format for the signal out

Rear Panel

1. HDMI OUTPUT: Connect your HDTV or monitor to these ports with HDMI cables

2. HDMI INPUT: Connect your HDMI source to these ports with HDMI cables

3. DC IN: Plug the 5V DC power supply into the unit and connect the adapter to an AC wall outlet

Remote control

Output A: Press either IN1/IN2/IN3/IN4 to select the source you want to display on output A,
pressing the forward or back buttons will cycle through the inputs
Output B: Press either IN1/IN2/IN3/IN4 to select the source you want to display on output B,
pressing the forward or back buttons will cycle through the inputs

Application Example