Lindy 38034, 38035 User Manual

Page 1
HDMI Switch Remote
3:1 and 5:1
User Manual English Benutzerhandbuch Deutsch Manuel Utilisateur Fançais
Manuale d’uso Italiano
www.LINDY.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION DEC 2012
English Manual
Deutsches Benutzerhandbuch
Introduction
This switch allows you to connect three or five HDMI devices to a single HDMI equipped TV or projector and then switch between them using a push button or remote control. The maximum cable length is 15m from the source to the switch and 15m from the switch to the display. We recommend using LINDY Super Long Distance Premium or GOLD cables for the best performance.
Features
High Speed HDMI, HDCP and DVI 1.0 compatible Supports 3D and 12-bit deep color, Full HD 1080p Supported resolutions:
o HDTV: 480i/p, 576i/p, 720p & 1080i/p o PC: up to 1920x1200
Frequency bandwidth 2.5Gbps / 225MHz LED channel selection indicators Easy to install and simple to operate
Package Contents
LINDY 3 or 5 Port HDMI Switch Infra-red remote control IR sensor with cable This User Manual
Connection and Operation
Connect the HDMI cables from your source devices to the
HDMI Input ports
Connect a HDMI cable from your display, monitor or
projector into the HDMI Output port on the switch
Connect the IR sensor and fix it with the enclosed
adhesive sticker at an appropriate position if you want to use the supplied IR remote control to switch ports
This switch has an optional PSU port: round Mini DC
connector 3.5mm/1.3mm. If your HDMI ports on your source devices do not support enough power over HDMI you will need to use an appropriate regulated 5VDC (positive center pin) power supply, i.e. LINDY No.73843
You can switch channels either from the remote control or via push button on the top of the switch.
The device also has an automatic switch function. This function will automatically change the source ports when a new device is connected.
Einführung
Dieser HDMI Umschalter kann zwischen bis zu 3 bzw. 5 HDMI Quellen sowohl per Fernbedienung wie per taste am Switch umschalten. Er schaltet ebenfalls auf ein neues eingeschaltetes oder gerade angeschlossenes Gerät um. Die maximal unterstützte Kabellänge beträgt jeweils 15m am Eingang und am Ausgang, vorausgesetzt Sie verwenden hochwertiges LINDY Super Long Distance Premium oder GOLD Kabel.
Eigenschaften
High Speed HDMI, HDCP und DVI 1.0 kompatibel Unterstützt 3D und 12 Bit Farbtiefe, Full HD 1080p Unterstützte Auflösungen, PC: bis 1920x1200,
HDTV: 480i/p, 576i/p, 720p, 1080i/p
Bandbreite 2.5Gbps / 225MHz, Portanzeige-LEDs Einfach zu installieren und leicht handzuhaben
Lieferumfang
LINDY 3 oder 5 Port HDMI Switch Infrarot Fernbedienung IR Sensor mit Kabel Dies Handbuch
Anschluss und Betrieb
Schließen Sie die HDMI Kabel von Ihren Signalquellen zum
Umschalter an
Schließen Sie die HDMI Kabel vom Umschalter zum
Display/Projektor an
Schließen Sie das Kabel vom IR-Sensor an und befestigen
Sie den IR-Sensor an geeigneter Position mit dem beiliegenden Selbstklebeband
Dieser Umschalter hat eine Mini-DC Rundanschlussbuchse
(3,5mm/1,3mm) für ein optionales Netzteil. In sehr seltenen Fällen, wenn Ihre HDMI Signalquellen nicht genügend Strom über die HDMI-Anschlüsse liefern, können Sie hier ein geregeltes 5VDC Netzteil (Plus auf Mittenanschluss) anschließen (Art.-Nr.70221 oder 73843).
Zum Wechseln der Ports / des Kanals können Sie entweder die Fernbedienung oder die Taste am Umschalter verwenden. Bitte beachten Sie auch, dass der Umschalter ebenfalls automatisch auf einen neu angeschlossenen aktiven HDMI Port umschaltet
Tested to comply with FCC Standards For Home and Office Use
Page 2
Radio Frequency Energy, Certifications
CE Certification
This equipment complies with the requirements relating to electromagnetic compatibility, EN55024 and EN55022 for ITE. It has been manufactured under the scope of RoHS compliance.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member s tate has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency. Battery Remark: Do not put empty batteries in your domestic waste bin. Empty batteries can be returned for recycling at our trade counter or at your local household recycling center. The raw materials enclosed in batteries such as Zinc, Iron and Nickel can be reused t o a very large proportion. The recycling of batteries and disused/obsolete electronic equipment is one of the most efficient environment protection actions you can easily take.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive Regelungen für die Verschrottung und das Recycling v on Elektro- und Elektronikprodukten geschaffen. Diese wurden im Elektro - und Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt. Dieses Gese tz verbietet das Entsorgen von entsprechenden, auch alten , Elektro- un d Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen Sammelstellen zugeführt werden! Dort werden sie kostenlos entg egen genommen. Di e Kosten für den weiteren Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller. Batteriehinweis: Dieses Produkt enthält in der Fernbedienung eine Lithium (L i)-Batterie. Es ist verboten leere Batterien und Akkus im Hausmüll zu entsorgen. Sie können die leere Batterie entnehmen und im Handel oder an den Recyclinghöfen kostenlos abgeben. Gesammelte Batterien und Akkus werden wiederverwertet und w ertvolle Rohstoffe wie Eisen, Zink oder Nickel werden wieder zurück gewonnen. Batterie- und Geräterecycling ist so einer der leichtesten
Umweltschutzbeiträge an dem Sie aktiv teilnehmen können.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques ou électroniques de votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di
apparecchi elettrici ed elettronici. Non è più consentito semplicemente gettare queste
apparecchiature, devono essere riciclate. Ogni stato membro dell’ EU ha tramutato le direttive
WEEE in leggi statali in varie misure. Fare riferimento alle leggi del proprio Stato quando si dispone di un apparecchio elettrico o elettronico. Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
LINDY Herstellergarantie – Hinweis für Kunden in Deutschland
LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine zweijährige Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website aufgelistet bei den AGBs.
LINDY No. 38034, 38035
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - First Edition - DEC 2012
Manuel Utilisateur
Manuale d’uso
Introduzione
Questo switch consente di connettere 3 dispositivi HDMI ad una singola TV o Proiettore dotato di porte HDMI e passare
da una sorgente all’altro con il pulsante integrato o il
telecomando. Lo switch commuta anche automaticamente sulla porta collegata ad un dispositivo che viene acceso.. La lunghezza massima raccomandata dei cavi di collegamento è 15m dalle sorgenti allo switch e 15m dallo switch al display utilizzando cavi LINDY Super Long Distance Premium o Premium GOLD.
Caratteristiche
Supporta gli standard High Speed HDMI, HDCP e DVI 1.0 Supporta 3D e 12-bit deep color, Full HD 1080p Supporta risoluzioni PC: fino a 1920x1200,
HDTV: 480i/p, 576i/p, 720p, 1080i/p
Larghezza di Banda / Frequenza 2.5Gbps / 225MHz LED di segnalazione canale attivo Facile da Installare e semplice da utilizzare
Contenuto della Confezione
Switch HDMI LINDY a 3 o 5 Porte Telecomando a Infra-rossi Sensore IR con cavo Questo Manuale
Installazione ed utilizzo
Collegate i cavi HDMI dalle sorgenti alle porte HDMI Input
dello switch
Collegate il cavo HDMI dal vostro display, monitor o
proiettore nella porta HDMI Output sullo switch
Collegate il sensore IR e fissatelo con l’adesivo fornito a
corredo in posizione appropriata nel caso vogliate utilizzare il telecomando per selezionare la porta attiva dello switch.
Lo switch ha una porta per un alimentatore opzionale con
connettore Mini DC rotondo 3.5mm/1.3mm . Solo in rari casi, quando le sorgenti non forniscono sufficiente alimentazione attraverso il bus HDMI sarà necessario utilizzare un alimentatore da 5VDC (positivo al centro) come gli articoli LINDY cod.73843 o 70221
Potete selezionare la porta attiva sia con il telecomando che con il pulsante posto sopra il dispositio. Lo switch seleziona automaticamente la porta collegata ad una sorgente che viene accesa. .
Introduction
Ce switch vous permet de connecter 3 appareils HDMI sur un téléviseur ou projecteur HDMI et de commuter ensuite entre les appareils sources à l’aide du bouton sur le switch ou de la télécommande. La commutation se fait automatiquement sur la dernière source active. La longueur maximale recommandée de câble est de 15m de la source au switch et de 15m du switch au périphérique d’affichage en utilisant les câbles de la gamme LINDY Super Long Distance Premium ou les câbles de la gamme GOLD.
Caractéristiques
Compatible HDMI High Speed, HDCP et DVI 1.0 Prise en charge 3D et 12-bit deep color, Full HD 1080p Résolutions prises en charge - PC: jusqu’à 1920x1200,
HDTV: 480i/p, 576i/p, 720p, 1080i/p
Bande passante 2.5Gbps / 225MHz Indicateurs LED de sélection du canal Facile à installer et simple d’utilisation
Contenu
Switch HDMI LINDY 3 ou 5 ports Télécommande infra-rouge Capteur IR avec câble Ce manuel
Connexion et utilisation
Connectez les cables HDMI de vos appareils source aux
ports d’entrée HDMI (Input)
Connectez un câble HDMI de votre écran, moniteur ou
projecteur au port de sortie HDMI (Output) sur le switch
Connectez le capteur IR et fixez-le à l’aide de
l’autocollant joint à un emplacement approprié, si vous
souhaitez utiliser la télécommande infra-rouge fournie pour commuter les ports.
Ce switch possède un connecteur d’alimentation
optionnelle: prise ronde Mini DC 3.5mm/1.3mm. Dans le cas où vos sources HDMI ne fournissent pas suffisamment de puissance pour l’alimentation en HDMI, vous devrez utiliser une alimentation régulée appropriée 5VDC (plus au centre), par exemple. N°Art.73843 ou N°Art.70221 LINDY
Vous pouvez commuter les ports soit à l’aide de la
télécommande ou grâce au bouton présent sur le dessus du boitier du switch. Le switch commute automatiquement sur la dernière source HDMI démarrée.
Tested to comply with FCC Standards For Home and Office Use
Loading...