Lindy 32563 User Manual

VGA to DVI Scaler

Manual

LINDY No. 32563

English

www.lindy.com

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (Dec 2007)

Manual English

Introduction

Thank you for purchasing the LINDY VGA to DVI Scaler. The VGA to DVI Scaler takes your analogue VGA or
Component Video signal and scales it to DVI, in either analogue or digital format. Perfect for use with LCD, Plasma
and Projector displays the VGA to DVI scaler will automatically detect the input type, and allow you to choose your
preferred output resolution using an OSD (on screen display).

Package Contents

• LINDY VGA to DVI Scaler

• 3 RCA to VGA Adapter Cable

• DVI Cable

• VGA Cable

• Power Adapter

• This User Manual

Installation

Input

The VGA to DVI Scaler can accept both VGA and Component Video inputs.
When using a VGA input; use the supplied VGA cable to connect your VGA source to the PC/HD Input connector
on the back of the VGA to DVI scaler. When using a Component Video input; use the supplied VGA to 3 RCA cable
to connect your Component Video source to the PC/HDTV Input connector of the VGA to DVI scaler. The VGA to
DVI scaler will automatically detect the mode and resolution of the PC/HDTV input.

Supported Input Resolutions

Output

The VGA to DVI scaler can output a variety of PC and High Definition resolutions, in both analogue and digital
format.
To use the digital output; connect the supplied DVI cable from the DVI Output connector to your display/monitor,
then press the menu button. From the on screen menu, choose Output Setup then select DVI-D.
To use the analogue output; connect a DVI to VGA cable (LINDY part no. 41206 – not supplied) from the DVI
Output connector to your display/monitor, then press the menu button. From the on screen menu, choose Output
Setup then select DVI-A.

Operation

Front Panel Rear Panel