LINDY 32446, 32447, 38108, 38107, 38104 User Manual [ml]
DVI Splitter
User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale d’uso Italiano
DVI-D Single Link LINDY No. 32446/32447/38108
DVI-D Dual Link LINDY No. 38107/38104
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH – SECOND EDITION (OCT 2015)
User Manual English
Introduction
Thank you for purchasing a splitter from the DVI-D range of products. These devices are high
performance DVI-D distribution amplifiers. They allow a DVI-D signal to be split to 2, 4 or 8 DVID enabled displays or projectors for multi-screen presentation.
The DVI-D single link versions with 2 (32447), 4 (32446) and 8 (38108) output ports support
HDCP signals with resolutions up to 1920x1200 or 1080p@60Hz.
The DVI-D dual link versions with 2 (38107) and 4 (38104) output ports do not support HDCP
signals and should only be used for DVI-D dual link signals with higher resolutions up to
2560x1600.
Package Contents
DVI-D Splitter
5V DC PSU
This user manual
Features
Single link versions support resolutions up to 1920x1200 or 1080p@60Hz
Dual link versions support resolutions up to 2560x1600
Can be cascaded up to 3 layers depending on the cable quality
Single link versions have a built in EDID simulator and HDCP keyset allowing each output to
operate independently. They also support HDMI signals when using appropriate cables and
adapters
Specification
Compliant with DVI 2.0 specification
Amplified outputs allow cable lengths of up to 15m when using DVI SLD cables
Video bandwidth:
Single link: 165Mhz
Dual link: 225Mhz
Installation
Make sure all devices are powered off before making any connections!
Connect all cables and power supplies to the sources, switches and displays.
Power on the displays, splitter then the source devices to avoid any connection issues.
NOTE: We recommend you do not use dual link splitters with resolutions of 1920x1200, 1080p60
or below. This may cause signal issues and lack of picture on your displays.
Loading...