Page 1
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (March 2014)
Bluetooth 3.0 Audio Receiver Pro
User Manual English
No. 20406
www.lindy.com
Tested to Comply with
FCC Standards
For Home and Office Use!
Page 2
User Manual English
Introduction
Thank you for purchasing the LINDY Bluetooth 3.0 Audio Receiver Pro. This device adds Bluetooth capabilities to
any HiFi or speaker system with analogue or digital inputs and delivers high fidelity wireless audio directly to your
audio system.
Compatible with modern Bluetooth enabled Smartphones, computers and devices, built in aptX® codec, Bluetooth
3.0 and TosLink / Optical Digital Audio output all help retain the full integrity of the source audio, ensuring the
sound is optimised for instant real-time playback comparable to having a direct hardwired connection with your
source device.
With a maximum range of up to 10m and a simple Bluetooth or NFC pairing setup, the Bluetooth 3.0 Audio
Receiver Pro is ideal for anyone wanting to make the most of their digital audio experience.
Package Contents
Bluetooth 3.0 Audio Receiver Pro
3.5 mm cable
3.5mm to 2x RCA Phono cable
USB to DC power cable
LINDY Manual
Features
aptX® codec support
NFC Quick link support
SBC codec support
A2DP Bluetooth profile support
10m effective range
Optical audio output - Digital
3.5mm audio output - Analogue
8 source device ID memory
Specification
Class 2 Bluetooth 3.0 +EDR with A2DP / IOPT
Bluetooth Frequency: 2.402-2.480GHz
Supported Codecs: atpX®, SBC
Supports multiple pairing for up to 8 source devices
Audio output: 1 x 3.5mm female, 1 x TosLink / Optical Digital audio
Signal To Noise Ratio: ≥ 90dB
aptX ® available for high quality stereo audio over Bluetooth
o Compression ratio: 4:1
o Max Data Rates: 352kbps
o Frequency Response: 10Hz to 22kHz
o Algorithmic Delay: <1.89ms @ Fs 48KHz.
o Dynamic Range: 16-bit: >92dB
o THD+N: -68.8dB
Power Consumption: < 1.5W
Chipset CSR: BC05MM (BlueCore5™ Multimedia)
Weight: 60 grams
Operation temperature: -10°C ~ +55°C, Storage tempe rature: -20°C ~ +60°C
Note - When aptX® is not available, the Bluetooth Audio Receiver Pro will pare down to SBC codec
aptX® software is copyright CSR plc or its group companies. All rights reserved. The aptX® mark and the aptX logo are trademarks of CSR plc
or one of its group companies and may be registered in one or more jurisdictions.
Page 3
User Manual English
Installation
Digital connection (recommended)
1. Connect one end of a TosLink / Optical Digital
Audio cable (sold separately) to the Optical Audio
Out socket of the Bluetooth Audio Receiver Pro
2. Connect the other end of the TosLink / Optical
Digital Audio cable to the Optical Input of your
home stereo system
Analogue connection
1. Connect one end of the included 3.5mm audio
cable to the Audio Out socket of the Bluetooth
Audio Receiver Pro
2. Connect the other end of the cable to an
analogue Audio Input on your home stereo
system or speakers
Connect the USB to DC cable to the DC input socket of the Bluetooth Audio Receiver Pro and connect this to a
USB power outlet or USB power adapter. The LED light will flash once to show the unit is powered and ready to be
paired with your source devices.
Operation
Pairing the Bluetooth Audio Receiver Pro
1. Activate your source device’s Bluetooth
2. Search for available devices
3. “Music Receiver” will appear in the list of available devices
4. Click to Pair & Connect to the “Music Receiver”. If a PIN is required enter “0000” when asked
5. Your source device will be connected to the Bluetooth Audio Receiver Pro, the Receiver’s indicator
LED will remain illuminated and you can start playing audio from your device
Pairing via NFC – for devices with NFC capabilities only
1. Start the NFC function on your device
2. TAP your source device on the top of the LINDY Bluetooth Audio Receiver Pro
3. A connected message will appear on your source device, the Receiver’s indicator LED will remain
illuminated and you can now play audio
USB to DC
Power
TosLink
Optical Audio
Cable
3.5mm cable
or
3.5mm cable with RCA
Phono adapter cable
HiFi | Amplifier | Speaker System
Page 4
User Manual English
Reconnecting your device
The effective range of Bluetooth Audio Receiver Pro is 10m (line of sight). If you hold or wear the source device or
cover the Bluetooth antenna, this distance will be shortened.
If you move out of range, or turn off the Bluetooth feature on your source device, the Bluetooth Audio Receiver Pro
will be automatically disconnected. In this situation the LED indicator light will go OFF, showing the connection
between the source device and the Bluetooth Audio Receiver Pro has been lost.
To reconnect, simply open the Bluetooth manager on your source device and tap on the “Music Receiver”, the
connection will be re-established automatically. You do not need to input a PIN when reconnecting.
Adding New & Additional devices
Although the Bluetooth Audio Receiver Pro can only play audio from one source device at a time, it is capable of
being paired with up to 8 source devices at one time.
If you want to use and switch between multiple source devices, follow these steps
1. End the existing Bluetooth connection with the initial connected source device
2. Once clear the Bluetooth Audio Receiver Pro will be free to connect with another source device
3. Follow the section “Pairing the Bluetooth Audio Receiver Pro” to connect a new source device
Troubleshooting
If you plan for the Bluetooth Audio Receiver Pro to be unused for extended periods of time it is advised
that you unplug its power supply and disconnect any external connections
1) To avoid a lost connection
o Keep your source devices in range of the Bluetooth Audio Receiver Pro, - 10m
o Make sure there is a clear line of sight between the Bluetooth Audio Receiver Pro and source device and
that there no obstructions in the way
o If the connection is lost for less than 15 seconds, it will automatically be re-established when your source
device comes in range and the LED indicator will turn on
o If the connection is lost for more than 15 seconds, you will need to reconnect the source device and
Bluetooth Audio Receiver Pro again. Please follow the “Reconnecting your device” section
2) If no audio plays from your connected speakers
o Make sure the Bluetooth Audio Receiver Pro is powered on – the indicator light should flash intermittently
o Make sure the audio cable or optical audio cable is correctly and firmly connected to Bluetooth Audio
Receiver Pro
o Make sure that the audio source selection of your amplifier matches your audio connection (analogue
audio or optical audio)
o Make sure the volume of the stereo is set to a comfortable listening level
o Make sure you are within range – 10m
o Make sure the Bluetooth function is active on your source device and you are not paired with other
Bluetooth devices
o Make sure you are playing the audio on your source device
Page 5
CE/FCC Statement
Page 6
CE/FCC Statement
Page 7
CE/FCC Statement
FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
You are cautioned that changes or modification not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
LINDY Herstellergarantie – Hinweis für Kunden in Deutschland
LINDY gewährt für dieses Produkt über die gesetzliche Regelung in Deutschland hinaus eine zweijährige
Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website
aufgelistet bei den AGBs.
Page 8
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical
and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different
ways. Please follow your national law when you want to dispose of any electrical or electronic products. More
details can be obtained from your national WEEE recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive Regelungen für die Verschrottung und das Recycling von
Elektro- und Elektronikprodukten geschaffen. Diese wurden im Elektro- und Elektronikgerätegesetz – ElektroG in
deutsches Recht umgesetzt. Dieses Gesetz verbietet das Entsorgen von entsprechenden, auch alten, Elektro- und
Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen
Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren
Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (DEEE) pour le recyclage de tout équipement
électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation DEEE de manières
légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques
ou électroniques de votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici
ed elettronici. Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate. Ogni
stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle leggi del
proprio Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
LINDY No 20406
1
st
Edition, March 2014
www.lindy.com
Tested to Comply with
FCC Standards
For Home and Office Use!
Loading...