Lincoln Electric K3590-1 User Manual
K3590-1 - RANGER UNDERCARRIAGE (ALL TERRAIN)
L17286
SIDE RAIL
1
T8833-86
3/8-16 X 1.25" HHCS
2
CF000067
3/8-16 HEX NUT
2
S9262-120
3/8" PLAIN WASHER
4
E106A-16
3/8" LOCKWASHER
2
L17287
SIDE RAIL
1
T8833-86
3/8-16 X 1.25" HHCS
2
CF000067
3/8-16 HEX NUT
2
S9262-120
3/8" PLAIN WASHER
E106A-16
3/8" LOCKWASHER
2
L17288
FRONT CROSSMEMBER
1
S24739-43
5/16-18 X .75" HHCS
4
S9262-121
5/16" PLAIN WASHER
4
CF000029
5/16-18 HEX NUT
4
E106A-14
5/16" LOCKWASHER
4
L17289
REAR CROSSMEMBER
1
S24739-43
5/16-18 X .75" HHCS
4
S9262-121
5/16" PLAIN WASHER
4
CF000029
5/16-18 HEX NUT
4
E106A-14
5/16" LOCKWASHER
4
5
M26317
AXLE SHAFT
2
S32770
PNEUMATIC WHEEL
4
S32843
E-CLIP
4
S9262-24
1.00" PLAIN WASHER
4
G9190
HANDLE ASSEMBLY
1
S24739-43
5/16-18 X .75" HHCS
4
S9262-121
5/16" PLAIN WASHER
4
CF000029
5/16-18 HEX NUT
4
E106A-14
5/16" LOCKWASHER
4
S33350
LIMITER BRACKET
2
T8833-86
3/8-16 X 1.25" HHCS
4
CF000067
3/8-16 HEX NUT
4
S9262-120
3/8" PLAIN WASHER
8
E106A-16
3/8" LOCKWASHER
4
REQUIRED TOOLS
• 9/16” Wrench and Socket
• 1/2” Wrench and Socket
• TORX T-30 Bit or Driver
• Grease Gun
• Hammer or Mallet
• Crane or Hoist
2
4
1
PARTS INCLUDED
1
2
4
7
3
5
6
WARNING
Push only from the front using the
Undercarriage handle.
4
3
8
6
7
8
CAUTION
times.
IM10503 Feb-19 ©Lincoln Global Inc. The graphics may not exactly reflect the latest design.
Step 1: Limiter Brackets
Install the two limiter brackets to the front crossmember as shown. Using a 9/16” wrench and
socket, attach with (4) 3/8”-16 x 1.25” hex head cap screw, (4) 3/8-16 hex head nuts, (8) 3/8”
plain washers, (4) 3/8” lock washers. Torque the 3/8-16 bolts to 15 ft-lb.
Figure A- 1
2
Step 2: Front Crossmember
Using a 1/2” wrench and socket, install the front crossmember (L17288) to the two side rails
(L17286 & L17287). Use (4) 5/16-18 x 1.00 hex head cap screw, (4) 5/16-18 hex nuts, (4) 5/16”
plain washers, and (4) 5/16” lock washers. Leave bolted connections finger tight.
Figure A- 2
3
Loading...