Lincoln Electric K1309-20, K1309-21, K1308-12, K1308-11 User Manual
Stick TIG MIG Flux-Cored Subarc
Gouging
Processes
DC-400
Order
Advantage Lincoln
Multi-Process Switch, Remote Output Control, Deluxe
Adjustable Gas Regulator and Hose Kit, Undercarriage
Recommended General Options
LN-7, LN-7 GMA, LN-742, LN-8, LN-9, LN-9 GMA, LN-10,
DH-10, LN-15, LN-23P, LN-25, Cobramatic®, NA-3, NA-5,
LT-7
Recommended Wire Feeders
K1308-11 DC-400 230/460/3/60
K1308-12 DC-400 (w/Multi-Process Switch) 230/460/3/60
K1309-20 DC-400 220/380/440/3/50/60
K1309-21 DC-400 (w/Multi-Process Switch) 220/380/440/3/50/60
Accessory Kit
Recommended Stick Options
Pro-Torch™ TIG Torches, TIG Module, Docking Kit, Hand
Amptrol™, Foot Amptrol, Remote Control Adapter, Amptrol
Adapter Kit, Water Valve, TIG Control Cable Extension
Recommended TIG Options
• Large, conveniently located switch makes it easy to
change between CC (Stick/TIG/arc gouging), CV
(MIG/flux-cored) and CV Submerged Arc modes.
• Arc force control adjusts short circuit current for a
soft arc or a forceful driving arc in the CC (Stick/TIG)
mode.
• Arc control adjustment changes pinch effect of the
arc to control spatter, fluidity, and bead shape in the
MIG/Flux-Cored mode.
• Capable of stick and DC TIG welding, and air carbon
arc gouging with up to 5/16" (8mm) diameter carbon
rods.
• Solid state circuitry provides extra long life for
repetitive welding applications.
• Outstanding welding performance with a single range
full output control potentiometer.
• Analog ammeter/voltmeter are standard.
• ± 10% input line voltage compensation for maintaining weld consistency.
• Low profile case allows stacking machines up to
three high to conserve floor space. (Stacking not
recommended when using undercarriage.)
www.lincolnelectric.com
E5.20 11/02
MULTI-PROCESS WELDERS
DC
CV
CC
3
PHASE
60Hz50
Hz
Description
This heavy-duty, industr ial, three-phase multi-process power source from
Lincoln Electric scores big in MIG, flux-cored, submerged arc, stick and DC
TIG welding. It's a great choice for arc gouging too. And flexibility doesn’t
mean complicated – the DC-400 is easy to set-up and use. Changeover
between processes is as simple as turning a switch with the factory or field
installed multi-process switch.On-board ammeter and voltmeter make
monitoring of key welding parameters a snap. Inductance and arc force
controls allow the operator to efficiently refine the arc for the job at hand.
Technical Specifications
Dimensions
Product Product Rated Output
(1)
Input Current @ H
(2)
x W x D Net Weight
Name Number Input Power Current/Voltage /Duty Cycle Rated Output Output Range in. (mm) lbs.(kg)
DC-400
K1308-11
K1308-12
K1309-20
K1309-21
230/460/3/60
220/380/440/
3/50/60
400A/36V/100%
(450A/38V/60%)
(500A/40V/50%)
78/39A
81/47/40A
60-500A
12-42V
27.5 x 22.3 x 33.1
(698 x 566 x 840)
473
(215)
(1) NEMA Class I Rated Output / Based on a 10 min. period.
(2) Add 3.3 in. (84mm) for lift bail.
400 Amp DC Multi-Process Welding Power Source
Output Input
(Shown with
Multi-Process
Switch option)
For maximum welding flexibility select the DH-10 dual
feeder. Weld with two different types and sizes of wire
with two different welding procedures
(3)
!
Description Order Number
DC-400 power source K1308-11
DH-10 wire feeder K1499-3
.045 Drive Roll – solid wire KP1505-045S
.035 Drive Roll – solid wire KP1505-035S
Magnum 400 Gun Package K471-21
(1) (2)
Weld Power Cable – 10 ft. K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
Where premium welding performance is demanded – this
system delivers!
Description Order Number
DC-400 power source K1308-11
LN-10 (four roll) wire feeder K1559-3
.045 Drive Roll – solid wire KP1505-045S
Swivel Platform K1557-1
Magnum 400 Gun Package K471-21
(1)
Weld Power Cable – 10 ft. (2 req’d.) K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
Best for applications where more process control is required
for arc starting, welding and crater control!
Description Order Number
DC-400 power source K1308-11
LN-742 (Two Roll) wire feeder K617-1
Feeder Control Cable – 10 ft K1819-10
.045 Drive Roll – solid wire KP653-052S
Universal Stand K1524-1
Swivel Platform K1557-1
Magnum 400 Gun & Cable asbly K471-2
Gun Connector Kit K466-1
Weld Power Cable – 10 ft. (2 req’d.) K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
Our most popular MIG and flux-cored welding system!
Description Order Number
DC-400 power source K1308-11
LN-7 GMA (Two Roll) wire feeder K440-2
Feeder Control Cable – 10 ft. K1818-10
.045 Drive Roll – solid wire KP653-052S
Universal Stand K1524-1
Swivel Platform K1557-1
Magnum®400 Gun & Cable asbly K471-2
Gun Connector Kit K466-1
Weld Power Cable – 10 ft. (2 req’d.) K1842-10
GC-500 Work Clamp K910-2
Undercarriage (twin cylinder) K841
Gas Regulator and Hose Kit K586-1
[2]
www.lincolnelectric.com
• Fan cooled for long life expectancy. Electronic and
thermostatic protection safeguard DC-400 from
current overload and excessive temperatures.
• Windings and rectifiers protected against moisture
and corrosive environments.
• Both 14 pin MS-style cable connection and terminal
strip access for remote control and wire feeder
connections and output studs for weld cables.
• Circuit breaker protected on-board power for a
wire feeder: 115V available from the terminal strip,
42V and 115V available from the 14-pin connector
receptacle.
• K1309 models have Continental European receptacle
that provides 220V, 2-amp AC auxiliary power for
operating water cooler.
• 115V AC power on/off switch with pilot light provides
added user safety.
• Durable powder paint system protects both sides of
all painted surfaces to prolong machine’s life.
• K1308 models are UL and CSA approved.
• Three year warranty on parts and labor.
• Manufactured under a quality system certified to
ISO 9001 requirements.
Advantage Lincoln
System Selection
DC-400/LN-7 GMA – .045 MIG Welding System
DC-400/LN-742 – .045 MIG Welding System
DC-400/DH-10 – .035 & .045 MIG Welding System
DC-400/LN-10 – .045 MIG Welding System
Typical MIG welding systems.
(1)
Fully assembled, no gun connector required.
(2)
Two required.
(3)
Both electrodes must have the same polarity.
Note: Above systems do not include shielding gas.Sold separately.
Loading...