Lincoln BCO-50 Service Manual
EaziCleanCan Opener
Models BCO-50, BCO-60 and BCO-70
HOW TO USE
PLEASE FOLLOW INSTRUCTIONS CAREFULLY.
1. Choose a convenient site with a firm work surface, and mount the base securely
using the screws supplied. (Do not use a new can opener in an old base).
On thin gauge tabletops we suggest that you fit a spacer plate underneath - this will
prevent flexing of the top and possible spillage of can contents during opening.
Operation:
2. With handle in vertical position engage bar in base.
3. Place can against bar and with a swift downward movement punch knife into can lid.
4. Lower the handle through 90°.
5. Crank clockwise to open can, then raise handle through 90°and lift opener to
disengage opener from open can.
6. Check knife regularly by testing the leading edge with thumbnail. Any grooves or
nicks will prevent clean removal of can lids. Replace damaged knife immediately.
7. Check gear teeth for wear - opener will slip if gear is worn. When changing gears, be
sure that all component parts are clean before reassembly.
P/N 2810306B
Cleaning and Changing of Blades using the “Quick Release” System:
All EaziClean Models:
The patented Quick Release System is activated by
pushing handle as shown on the right. This allows for
fast and efficient removal of blade carrier assembly for
increased hygene and food safety. Blade is removed
by loosening hand operated knurled screws.
Gear wheel and other components are removed
by restricting gear while turning handle
counter-clockwise.
Clean with hot water and a bristle brush.
Do not lubricate.
Spare parts and accessories for the EaziClean Can Openers
Letter Part Number Description
A 379093 Composite Handle Assembly BCO-50, BCO-60
A 379094 Stainless Steel Handle Assembly BCO-70
B 379095 Collar Washer BCO-50, BCO-60
C 379096 Reamed Collar BCO-50, BCO-60, BCO- 70,
D 379097 Zinc Plated Spring BCO-50, BCO-60
D 379098 Stainless Steel Spring BCO-70
E BCO-10 Gear for BCO-50, BCO-60, BCO-70
F BCO-14 Quick Release Blade Carrier for BCO-50, BCO-60, BCO-70
G BCO-16 Blade Screws & O-Ring Washers for BCO-50, BCO-60, BCO-70
H BCO-11 Blade
I BCO-3 Base
J 379090 Base Clamp Only
K 379089 Base & Clamp
L 379099 Bronze Bush BCO-50, BCO-60, BCO-70
Loading...