Lincoln 16900 Installation Manual

Operating Instructions:

InstaBlend Model #16900

1.Plug unit in.

4.Press Start button and Safety
button at the same time. Re­leasing the Start button will
cause the machine to stop
operating.

2.Insert arm of machine into
bowl, up to 2/3 of the mixer
arm’s length. Do not let the foot
of the machine touch the bottom
of the bowl.

5.While the machine is running,
press the Lock button. After the
Lock button is depressed, the
Start button may be released
and the machine will continue to
operate.

Cleaning Instructions:

3.To prevent food getting inside
the motor, DO NOT incline
machine more than 30°.

6.Pressing the Start button
again will shut off machine.

1.Immediately after use, place
2/3 of the mixer arm into hot
water and switch on for a few
seconds.

4.Rinse the mixer arm and blade
with warm water to remove any
residue.

UNDER NO CIRCUMSTANCES MUST WATER ENTER THE MOTOR SET!

2.To remove mixer arm, turn the
mixer clockwise until the arm
separates from the motor set.

5.Allow mixer arm and blade to
air dry.

TECHNICAL SERVICE HOTLINE: [phone]

3.The mixer blade must be
cleaned with hot water and mild
detergent, leaving the blade
submerged for 30 minutes.

6.Motor must only be cleaned
with a damp cloth.