Lincat Silverlink 600 CS4, Silverlink 600 CS6, Silverlink 600 CS4/G Installation, Operating And Servicing Instructions

Page 1

IS 304 ECN 3607 Page 1 of 7

Installation, Operating and Servicing Instructions

Silverlink 600 Electric Chip Scuttles CS4, CS4/G, CS6

Please make a note of your product details for future use:

Date Purchased:_________________________ Model Number:__________________________ Serial Number:__________________________ Dealer:_________________________________ _______________________________________

Page 2

IS 304 ECN 3607 Page 2 of 7

CONTENTS

Important Information

Warnings and Precautions

Technical Data

Checklist of Enclosures

Installation and Commissioning

3-4

Operating Instructions

Cleaning

Servicing, Maintenance and Component Replacement

Fault Finding

Spare Parts List

Service Information and Guarantee

IMPORTANT INFORMATION

Read these instructions carefully before using this product, paying particular attention to all sections that carry warning symbols, caution symbols and notices. Ensure that these are understood at all times.

WARNING!

This symbol is used whenever there is a risk of personal injury.

CAUTION!

This symbol is used whenever there is a risk of damaging your Lincat product.

NOTE:

This symbol is used to provide additional information, hints and tips.

KEEP THIS MANUAL FOR FUTURE REFERENCE

Page 3

IS 304 ECN 3607 Page 3 of 7

WARNINGS AND PRECAUTIONS

This appliance must be installed, commissioned and serviced by a qualified person in accordance with national and local regulations in force in the country of installation.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person.

Ensure that the plug/socket is accessible at all times.

Strip plastic coating and clean the appliance before use. During operation parts may become hot - avoid accidental contact. Disconnect this appliance before servicing, maintenance or cleaning.

TECHNICAL DATA

Model

Height (mm)

Width (mm)

Depth (mm)

Weight (kg)

CS4

265

450

600

CS4/G

645

450

600

CS6

265

600

CHECK LIST OF ENCLOSURES

Warranty Card

Instructions Manual

Lid knob kit (CS4, CS6)

INSTALLATION AND COMMISSIONING

This appliance must be earthed.

An equipotential bonding terminal is provided to allow cross bonding with other equipment.

Page 4

IS 304 ECN 3607 Page 4 of 7

If replacing the plug connect the terminals as follows: Green and Yellow wire Earth E Blue wire Neutral N Brown wire Live L

Model

Power Rating (kW)

CS4

0.5

CS4/G

1.0

CS6

0.75

This appliance is fitted with a moulded plug and lead ready to be connected to an

earthed socket.

Install this appliance on a level surface ensuring all vents are unobstructed.

Install this appliance on a level surface ensuring all vents are unobstructed. Any

partitions, walls or furniture must be of non-combustible material. Minimum

distances a 100mm B 500mm – see Fig 1.

Fig 1

Fit lid knob to lid (CS4, CS6).

Page 5

IS 304 ECN 3607 Page 5 of 7

OPERATING INSTRUCTIONS

Only qualified or trained personnel should use this appliance.

Connect to the power supply and switch on – the green neon illuminates.

Select the desired setting on the control knob and allow the appliance to heat up.

The overhead gantry lamp on the CS4/G will operate in conjunction with the control

knob.

CLEANING

Do not use a water jet or steam cleaner, and do not immerse this appliance.

Clean all panels with warm water and mild detergent do not use abrasive

materials. Dry with a soft cloth.

SERVICING, MAINTENANCE AND COMPONENT REPLACEMENT

Overhead lamp replacement Turn power off and allow appliance to cool.

The bulb holders are sprung loaded - carefully push old lamp against either end

terminal until opposite end is free.

Remove lamp and reverse procedure to insert replacement. Handle the

replacement lamp by the ceramic end caps and avoid touching the glass.

Please refer to the Service Help Desk number on the final page of this manual.

FAULT FINDING

Page 6

IS 304 ECN 3607 Page 6 of 7

Part Number

Description

Used on

EL216

Element

CS4, CS4/G

EL219

Element

CS6

EN10

Energy regulator

All

FE37

Adjustable foot

All

KN10

Lid knob

CS4, CS6

KN263

Control knob

All

LA210

Clip in lamp assembly

CS4/G

NE43

Neon

All

PL201

Plug & lead

All

TA09

Gastronorm tank

CS4/G

SPARE PARTS LIST

Page 7

IS 304 ECN 3607 Page 7 of 7

For help with the installation, maintenance and use of your Lincat equipment,

please contact our service department:

 UK: 01522 875520

For non-UK customers, please contact your local Lincat dealer

All service work, other than routine cleaning should be carried out by one of our

authorised service agents. We cannot accept responsibility for work carried out by

other persons.

To ensure your service enquiry is handled as efficiently as possible, please tell us:

 Brief details of the problem

 Product code

All available on serial plate

 Type number

 Serial number

Lincat reserve the right to carry out any work under warranty, given reasonable

access to the appliance, during normal working hours, Monday to Friday, 08:30 to

17:00.

GUARANTEE

This unit carries a comprehensive UK mainland 2 year warranty. The guarantee is

in addition to, and does not diminish your statutory or legal rights.

The guarantee does not cover:

 Accidental damage, misuse or use not in accordance with the manufacturer’s

instructions

 Consumable items (such as filters, glass, bulbs, slot toaster elements and door

seals.)

 Damage due to incorrect installation, modification, unauthorised service work or

damage due to scale, food debris build-up, etc.

The manufacturer disclaims any liability for incidental, or consequential damages.

Attendance is based on reasonable access to the appliance to allow the authorised technician to carry out the warranty work.

Service calls to equipment under warranty will be carried out in accordance with the conditions of sale. Unless otherwise specified, a maximum of 15 minutes of administrative time, not spent directly carrying out servicing work, is provided for within the warranty. Any requirement for staff attending the call to spend greater time than 15 minutes due to administrative requirements, such as on health and safety risk assessments, will be chargeable at the prevailing rate.

SERVICE INFORMATION