User and Installation Instructions
SCH785, SCH1085
Seal Heated Showcases
IS285 ECN2843
Page 2
Dear Customer,
Thank you for purchasing this Lincat product.
This is just one of over 450 different items of catering equipment available which is
constantly being extended and improved. Details are available from your local
distributor or direct from us.
Used for the purposes for which it is intended, and with careful maintenance as
outlined in this User Guide, your Lincat product will give years of trouble free use.
NOTE
IMPORTANT INFORMATION
Please read all of the safety and operating instructions carefully before
using this product. Please pay particular attention to all sections of this
User Guide that carry warning symbols and notices.
WARNING!
This is a Warning symbol. This symbol is used throughout the user
guide whenever there is a risk of personal injury. Ensure that these
warnings are read and understood at all times.
CAUTION!
This is a Caution symbol. This symbol is used throughout the User Guide
whenever there is a risk damaging your Lincat product. Ensure that these
warnings are read and understood at all times.
NOTE:
This is a Note symbol. This symbol is used throughout the User Guide to provide
additional information, hints and tips.
IS285 ECN2843
Page 3
CONTENTS
Contents Page
Safety instructions………………………………………………………4
Product specification………………………………………………….. 5
Features………………………………………………………………….. 5
Technical specification…………………………………………………5
Pack contents…………………………………………………….………6
Spare parts list………………………………………………………….. 6
Installation……………………………………………………………….. 7
Connecting to the electricity supply……………………………. 7
Operating instructions………………………………………………….8
Humidity feature………………………………………………….. 8
Cleaning and maintenance……………………………………………. 9
Replacing the light tube…………………………………………..9
Service information…………………………………………………….. 10
Conditions of guarantee…..…………………………………….…….. 10
USE OF THE HEATED SHOWCASES
The Heated Showcases are intended to be used on counter tops to display
heated food products.
IS285 ECN2843
Page 4
SAFETY INSTRUCTIONS
WARNING!
Basic safety precautions, including the following, should be
followed to reduce the risk of personal injury. Make sure you
have read all of these instructions before switching on the unit.
Keep this User Guide in a safe place for future reference for you and your
staff.
Do not clean the unit with a water jet.
REMOVAL OF PACKAGING
In the interest of hygiene, you should clean the product after unpacking and
ensure all plastic coatings are removed before use.
This unit is heavy. Take care when moving it. Do not pull the unit across your
work surface as it is heavy and may make a mark.
The unit relies on the circulation of warm air, which must pass through
and around the shelves. Ensure circulation is not obstructed by food
product or aluminium foil. Do not obstruct the front and rear circulation
vents.
GENERAL
Do not try to modify this product.
Ensure that the electrical supply cable is not damaged.
If the supply cable is damaged, it should be replaced by Lincat Ltd or suitably
qualified persons, in order to avoid a hazard.
EQUIPOTENTIALITY
This equipment is provided with an equipotential bonding terminal to
allow earth cross-bonding with other equipment.
IS285 ECN2843
Loading...