Please make a note of your product details for
future use:
Date Purchased:_________________________
Model Number:__________________________
Serial Number:__________________________
Dealer:_________________________________
_______________________________________
Installation, Operating and Servicing
Instructions
Silverlink 600 Heated and Ambient Pedestals
CC3, CC4, CC6, CC7, CN3, CN4, CN6,
CN7, HC3, HC4, HC6, HC7, HCL3, HCL4,
HCL6, HCL7, HCL9.
IS 222 ECN 3607 Page 1 of 8
CONTENTS
Important Information
2
Warnings and Precautions
3
Technical Data
3
Checklist of Enclosures
4
Installation and Commissioning
4-5
Operating Instructions
5-6
Cleaning
6
Servicing, Maintenance and Component Replacement
6
Fault Finding
6
Spare Parts List
7
Accessories
7
Service Information and Guarantee
8
IMPORTANT INFORMATION
Read these instructions carefully before using this product, paying particular
attention to all sections that carry warning symbols, caution symbols and notices.
Ensure that these are understood at all times.
WARNING!
This symbol is used whenever there is a risk of personal injury.
CAUTION!
This symbol is used whenever there is a risk of damaging your Lincat product.
NOTE:
This symbol is used to provide additional information, hints and tips.
KEEP THIS MANUAL FOR FUTURE REFERENCE
IS 222 ECN 3607 Page 2 of 8
WARNINGS AND PRECAUTIONS
TECHNICAL DATA
Model
Height (mm) - adjustable
Width (mm)
Depth (mm)
Weight (kg)
CC3
650 - 670
300
600
14
CC4
450
18
CC6
600
22
CC7
750
26
CN3
300
567
11
CN4
450
14
CN6
600
17
CN7
750
20
HC3
300
600
17
HC4
450
21
HC6
600
25
HC7
750
30
HCL3
650 - 685
300
18
HCL4
450
22
HCL6
600
26
HCL7
750
30
HCL9
900
34
This appliance must be installed, commissioned and serviced by a qualified person
in accordance with national and local regulations in force in the country of
installation.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person.
Ensure that the plug/socket is accessible at all times.
Strip plastic coating and clean the appliance before use.
During operation parts may become hot - avoid accidental contact.
Disconnect this appliance before servicing, maintenance or cleaning.
IS 222 ECN 3607 Page 3 of 8
CHECK LIST OF ENCLOSURES
Warranty card
Instructions manual
Shelf
Feet kit
INSTALLATION AND COMMISSIONING
For Heated models:
This appliance must be earthed.
An equipotential bonding terminal is provided to allow cross bonding with other
equipment.
Fig 1
IS 222 ECN 3607 Page 4 of 8
If replacing the plug connect the terminals as follows:
Model
Power (kW)
CC3
-
CC4
-
CC6
-
CC7
-
CN3
-
CN4
-
CN6
-
CN7
-
HC3
0.25
HC4
0.5
HC6
0.5
HC7
0.5
HCL3
0.25
HCL4
0.5
HCL6
0.5
HCL7
0.75
HCL9
1.0
OPERATING INSTRUCTIONS
Green and Yellow wire Earth E
Blue wire Neutral N
Brown wire Live L
Install this appliance on a level surface ensuring all vents are unobstructed. Any
partitions, walls or furniture must be of non-combustible material. Minimum
distances A 50mm B 500mm – see Fig 1.
This appliance is fitted with a moulded plug and lead ready to be connected to an
earthed socket.
Screw the legs/feet provided into the base and adjust until level.
Power ratings
Only qualified or trained personnel should use this appliance.
Heated Pedestals
Connect to the supply – the green switch will illuminate.
Press switch to ‘On’ and the appliance will heat up and then maintain the
temperature at the factory set level.
IS 222 ECN 3607 Page 5 of 8
Heated pedestals are designed for warming and holding plates and crockery.
Model width
Maximum weight per shelf (kg)
300
30
450
45
600
60
750
75
900
90
CLEANING
SERVICING, MAINTENANCE AND
COMPONENT REPLACEMENT
FAULT FINDING
They operate at temperatures below the requirements of the Food Safety
Regulations and are not intended for holding food.
Evenly distribute items and do not exceed the recommended weight per shelf as
given in the table below.
Additional shelves up to a total of 3 may be added (see accessories), however this
may reduce the performance within the upper section of the appliance.
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent, do not use abrasive
materials. Dry with a soft cloth.
All servicing, maintenance and component replacement on these appliances should
be carried out by one of our recommended service engineers.
Please refer to the Service Helpdesk number on the final page of this manual.
IS 222 ECN 3607 Page 6 of 8
Part Number
Description
Used on
EL214
Element – 250W
HC3, HCL3
EL216
Element – 500W
HC4, HC6, HC7, HCL4, HCL6, HCL9 ( x 2)
EL219
Element – 750W
HCL7
FE10
Adjustable foot
CC, CN, HC models
FE29
Adjustable leg
HCL models
HA73
Door handle
All door models
HI24
Door hinge
HI25
Hinge plate
PL201
Plug & lead
All heated models
SW66
Switch
TH75
Thermostat
Part Number
Description
Used on
PSH3
Shelf
300 models
PSH4
450 models
PSH6
600 models
PSH7
750 models
PSH9
900 models
SPARE PARTS LIST
ACCESSORIES
IS 222 ECN 3607 Page 7 of 8
Product code
All available on serial plate
Type number
Serial number
SERVICE INFORMATION
For help with the installation, maintenance and use of your Lincat equipment,
please contact our service department:
UK: 01522 875520
For non-UK customers, please contact your local Lincat dealer
All service work, other than routine cleaning should be carried out by one of our
authorised service agents. We cannot accept responsibility for work carried out by
other persons.
To ensure your service enquiry is handled as efficiently as possible, please tell us:
Brief details of the problem
Lincat reserve the right to carry out any work under warranty, given reasonable
access to the appliance, during normal working hours, Monday to Friday, 08:30 to
17:00.
GUARANTEE
This unit carries a comprehensive UK mainland 2 year warranty. The guarantee is
in addition to, and does not diminish your statutory or legal rights.
The guarantee does not cover:
Accidental damage, misuse or use not in accordance with the manufacturer’s
instructions
Consumable items (such as filters, glass, bulbs, slot toaster elements and door
seals.)
Damage due to incorrect installation, modification, unauthorised service work or
damage due to scale, food debris build-up, etc.
The manufacturer disclaims any liability for incidental, or consequential damages.
Attendance is based on reasonable access to the appliance to allow the authorised
technician to carry out the warranty work.
Service calls to equipment under warranty will be carried out in accordance with the
conditions of sale. Unless otherwise specified, a maximum of 15 minutes of
administrative time, not spent directly carrying out servicing work, is provided for
within the warranty. Any requirement for staff attending the call to spend greater time
than 15 minutes due to administrative requirements, such as on health and safety risk
assessments, will be chargeable at the prevailing rate.
IS 222 ECN 3607 Page 8 of 8
Loading...