Congratulations and thank you for choosing Linärie to
introduce a new comfort of cooking in your home. We are
sure you will find your new appliance a pleasure to use and
a great asset to your kitchen.
This appliance complies with all relevant safety
requirements in Australia. Inappropriate use can, however,
lead to personal injury and damage to property.
In order to operate the unit correctly and safely, please read
this instruction manual carefully before installation and
usage. This user manual which provides you with all
required instructions related to safety, installation, use and
maintenance of the appliance.
For future reference, please store this booklet in a safe place
and ensure that all users are familiar with the contents. Pass
them on to any future owner of the
appliance.
Adherence to the directions for use in this manual is extremely important for health and safety.
Failure to strictly adhere to the requirements in this manual may result in personal injury, property
damage and affect your ability to make a claim under Linärie’s manufacturer’s warranty provided
with your product. Products must be used, installed and operated in accordance with this manual.
You may not be able to claim on Linärie’s manufacturer’s warranty in the event that your product
fault is due to failure to adhere this manual.
Correct Conditions of Use
The appliance is intended for use in the home and similar environments only.
It is not intended for commercial use.
The appliance is not suitable for outdoor use, non-stationary installation
(e.g. on ships, vehicles), or heating rooms.
Linärie does not assume any liability for damage arising from non-adherence to
these documents and from improper assembly. The electricity connection must be
made by a qualified specialist. Installation must comply with the valid standards,
regulations and laws. All safety and warning information and the operating and installation instructions must be complied with.
1. GENERAL INFORMATION
A damaged appliance can be dangerous. If you find the appliance is damaged or marked,
you must report it within 7 days if you wish to claim for damage/marks under the manufacturer’s warranty. This does not affect your statutory rights. Do not use a damaged appliance.
The manufacturer's warranty will be invalidated if the appliance is not repaired by a Linärie
approved service technician.
Faulty components must only be replaced by genuine Linärie spare parts. The manufacturer
can only guarantee the safety of the appliance when Linärie replacement parts are used.
If the power cord is damaged, it must only be replaced by a Linärie authorized service technician or suitably qualified electrician in order to avoid a hazard.
Linärie cannot be held liable for noncompliance with these instructions, resulting from
incorrect or improper use or operation.
2. GENERAL SAFETY INTRUCTIONS
The appliance complies with the stipulated safety requirements in Australia. The
user is responsible for appliance cleaning and maintenance as well as its safe use.
Improper use can lead to personal injury and damage to property.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
www.linarie.com.au
Additional information on products, accessories,
warranty, replacement parts and services can be
found at www.linarie.com.au
3
Children and People with Special Needs
The appliance is NOT suitable for use by children without supervision.
Young children should be supervised near the appliance to ensure they do not play with
this appliance.
Children may be able to wrap themselves in packing material or pull it over their heads
with the risk of suffocation. Keep children away from any packing material.
Unauthorized Modifications
Unauthorised modifications can cause the appliance to pose risks. Do not conduct any
modifications to the appliance.
Cleaning & Maintenance
The device must be cleaned regularly. Dirt can lead to damage or the buildup of odors.
(See “Cleaning and maintenance” section).
Always clean the appliance exactly as indicated in the operating instructions.
Always ensure the appliance is switched off before cleaning or replacing parts.
Clean the appliance immediately after any food spillage and the filter regularly to keep
the appliance working efficiently.
There is a risk of fire if cleaning is not carried out as described in these operating instructions.
Make sure no water penetrates inside the device when cleaning. Do not use any steam device
to clean this appliance. The steam could reach electrical components and cause a short circuit.
In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the machine and its surroundings in a clean condition at all
times. Any damage which may be caused by cockroaches or other vermin will not be
covered by the machine warranty.
Safety Instructions - Installation
The appliance must only be installed and assembled by trained specialists who are familiar with and
comply with the standard national regulations and supplementary regulations of ventilation systems.
In order to avoid any potential hazard, the installation instructions must be followed.
Observe all regional regulations for the installation of ventilation systems.
During installation, maintenance and repair work, the appliance must be disconnected from
the mains electricity supply. It is only completely isolated from the electricity supply when:
– the mains circuit breaker is switched off, or
– it is switched off at the wall socket and the plug is withdrawn from the socket.
Do not pull the mains connection cable but the mains plug to disconnect your appliance
from the mains electricity supply.
Ensure that all specified vents, openings and airspaces are not blocked.
Do not connect the appliance to the mains electricity supply by a multi-socket unit or an
extension lead.
Extension leads are a fire hazard and do not guarantee the required safety of the appliance.
Tampering with electrical connections or components and mechanical parts is highly
dangerous to the user and can cause operational faults. Only open the housing as described
in the instructions given in “Installation” and in the “Cleaning & Maintenance” sections of
this booklet. Under no circumstances should any other parts of the housing be opened.
www.linarie.com.au
4
Safety Instructions - Cooktop operation
The appliance must only be installed and assembled by trained specialists who are familiar with and
comply with the standard national regulations and supplementary regulations of ventilation systems.
Connection and operation
The appliances are constructed in accordance with the relevant safety regulations.
The appliance is manufactured in compliance with the relevant effective safety standards.
Nevertheless, we strongly recommend that persons with impaired physical, motoric, or mental
capacity, or persons with inadequate experience or knowledge, do not use the appliance
unless attended by a qualified person. The same recommendation applies when the appliance
is used by persons of less-than-legal age.
Connecting the appliance to the mains and repairing and servicing the appliance may only
be carried out by a qualified electrician according to currently-valid safety regulations.
For your own safety, do not allow anyone other than a qualified service technician to install,
service or repair this appliance.
Check to make sure the mains socket has the correct rating (16A, 230V) before you connect
the appliance.
Only use the appliance if the electrical system in your home has a rating of 16A.
Noise level: Lc < 70 dB(A)
Concerning the cooktop
Never touch the surfaces of heating or cooking appliances. They will become hot during
operation. Keep children at a safe distance. There is a risk of burning! Never allow the
induction cooktop to operate unattended, as the high power setting (power max.) results in
extremely fast reactions.
Always place and use the appliance on a dry, stable, level and horizontal surface and
distance 10 cm back-round surrounding.
When cooking, pay attention to the heat-up speed of the cooking zones.
Avoiding boiling the pots dry as there is a risk of the pots overheating!
Do not place empty pots and pans on cooking zones which have been
switched on.
Take care when using simmering pans as simmering water may dry up
unnoticed, resulting in damage to the pot and to the cooktop for which no
liability will be assumed.
It is essential that after using a cooking zone you switch it off.
Overheated fats and oils may spontaneously ignite. Always supervise the
preparation of food with fats and oils. Never extinguish ignited fats and oils
with water! Put the lid on the pan and switch off the cooking zone.
The glass ceramic surface of the cooktop is extremely robust. You should, however, avoid
dropping hard objects onto the glass ceramic cooktop. Sharp objects which fall onto your
cooktop might break it. If cracks, fractures or any other defects appear in your glass ceramic
cooktop, immediately switch off the appliance. Disconnect fuse immediately and call
Customer Service.
If the cooktop cannot be switched off due to a defect in the sensor control immediately
disconnect your appliance and call Customer service.
Take care when working with home appliances! Connecting cables must
not come into contact with hot cooking zones.
The glass ceramic cooktop should not be used as a storage area.
Do not put aluminum foil or plastic onto the cooking zones. Keep everything which could melt,
such as plastics, foil and in particular sugar and sugary foods away from hot cooking zones.
Use a special glass scraper to immediately remove any sugar from the ceramic cooktop
(when it it still hot) in order to avoid damaging the cooktop.
www.linarie.com.au
5
Metal items (pots and pans, cutlery, etc.) must never be put down on the induction cooktop
since they may become hot. Risk of burning!
Do not place combustible, inflammable deformable objects directly underneath the cooktop.
Metal items worn on your body may become hot in the immediate vicinity of the induction cooktop.
Caution! Risk of burns! Non-magnetisable objects (e.g. gold or silver rings) will not be affected.
Never use the cooking zones to heat up unopened tins of food or packaging made of material
compounds. The power supply may cause them to burst!
Keep the sensor buttons clean since the appliance may consider dirt to be finger contact. Never
put anything (pans, tea towels etc.) onto the sensor buttons! If food boils over onto the sensor
buttons, we advise you to activate the OFF button.
Hot pans should not cover the sensor buttons, since this will cause the appliance to switch
off automatically.
Activate the childproof lock if there are any pets in the home which could make contact
with the cooktop.
The induction cooktop may not be used when pyrolysis operation is taking place in a builtin oven.
The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
Do not use the glass ceramic cooktop if it is cracked or broken. If any visible crack appears,
immediately unplug disconnect the appliance from the power supply.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Do not let the cord hang over the edge of the table or worktop.
WARNING: Danger of fire: do not store items on the cooking surfaces.
WARNING: Unattended cooking on a cooktop with fat or oil can be dangerous and may
result in fire. Never try to extinguish a fire with water, but switch off the appliance and
then cover flame with a lid or a damp cloth.
After use, switch off the cooktop element by its control and not rely on the pan detector.
(depending on model)
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric
shock. (depending on model)
Metallic objects such as knives, forks, spoons and lids should not be placed on the cooktop
surface since they can get hot. (depending on model)
WARNING: Ensure that the appliance is switched off before replacing lamp to avoid the
possibility of electric shock.
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since
they can scratch the surface, which may result in shattering of the glass.
www.linarie.com.au
6
3. OPERATION
Specification
MODEL NO. : LS30I1Z
RATED VOLTAGE : 220-240V~50/60Hz
POWER CONSUMPTION: 2000 Watts
WHAT IS INDUCTION COOKING?
An induction cooker creates an
electromagnetic field to heat the
induction compatible cooking
saucepan/pot. Very little energy is
Working principle
Eddy current
formed at the
bottom
Magnetic line
of force
Plate
wasted heating the glass ceramic plate,
as most of the heat is transferred directly to the food. As the majority of the heat is
absorbed by the saucepan/pot, the cooking surface remains cooler to the touch
than most traditional cooktops making cooking fast, safe and energy efficient.
BEFORE FIRST USE
Before using your Breville induction cooker become familiar with all the parts.
Remove and safely discard all packaging materials and promotional labels.
Wipe the glass ceramic plate surface with a soft damp cloth and dry thoroughly.
HOW TO USE YOUR QUICK COOKTOP
1. Place the induction cooker on a dry, stable and level surface.
2. Make sure there is at least 10cm free space around the induction cooker to
prevent overheating.
3. Position an induction compatible saucepan/pot in the centre of the circular
design on the glass ceramic plate surface, ensure liquid or food is inside the
saucepan/pot.
4. Insert the power plug into a 230V or 240V power outlet and switch power
outlet ‘On’.
NOTE
Ensure the saucepan/pot is positioned in the centre of the circular design on
the glass ceramic plate surface.
To achieve maximum efficiency, it is essential to use the correct type of saucepans
/pot. Please refer to the cooking vessel manufacturer to confirm suitability for
induction cooking
WARNING
Never use the saucepan/pot when empty; ensure liquid or food is inside the
saucepan/pot.
RECOMMENDED TYPES AND SIZES OF COOKWARE
Material Cookware with a bottom made of iron ormagnetic stainless steel.
Shape Cookware with a flat bottom.
Size Cookware with a bottom diameter of 12-23cm depending on the cook mode.
www.linarie.com.au
7
cont. operation
COMPONENTS
A. Ceramic glass cooktop
B. Cooking zone (glass ceramic
plate surface)
C. Control panel with 6 cooking modes
D. Increase/ decrease button
E. Function button
A
B
Control panel with
6 cooking modes (1-6)
234561
89
1.SOUP > Press "FUNCTION" button to select the "SOUP" function. The light lits up, and machine will
work with default setting if there is no operation for 5secs. After soup program finish, the machine will
stop automatically.
2.HOTPOT > Press "FUNCTION" button to select the "HOTPOT"function.The light lits up, and machine will
work with default setting. Set power by pressing “+” or “-”. The display will show the current state.
3.FRY > Press "FUNCTION" button to select the "FRY" function.The lights lit up, and machine
will work with default setting. Set power by pressing “+” or “-” . The display will show the current state.
4.BBQ > Press "FUNCTION" button to select the "BBQ" function. The light lits up, and machine will
work with default setting. Set power by pressing “+” or “-” . The display will show the current state.
5.WARM > Press "FUNCTION" button to select the "WARM" function.The light lits up, and machine
will work with default setting if there is no operation for 5secs. After water program finish, the machine
will stop automatically.
6.WATER > Press "FUNCTION" button to select the "WATER" function. The light lits up,and
machine will work with default setting if there is no operation for 5secs. After water program finish,
the machine will stop automatically and power off.
7. ON/OFF > Plug in the power cord, the buzzer will “BI” once, all the indicator lights will be on for
a second. Press "ON/OFF”,and choose cooking function.
8.TIMER > In the working state, press “timer” to enter the timing function, the indicator light is on,
Press “+” or “-” to adjust timer,long press,the time will be increased or reduce by 10mins.short press,
the time will be increased or reduce by 1min.then it will start countdown and then automatic shutdown,
return to standby status.. If you want to modify the timing value, you need to press the "TIMER" button
and re-adjust it through the “+” or “-”. All of functions can be timed.
9.LOCK > Until any mode,To set the child Lock function,please press”LOCK”button,the display will
show “Loc”.under the Lock mode,all the button will be blocked except for “ON/OFF”.
For Un-lock,please long press “LOCK”key for 2sec.
C
DE
7
www.linarie.com.au
8
4. POWER SETTINGS
Power settings
The heating power of the cooking zones can be set at various power levels. In
the chart you will find examples of how to use each setting.
Cooking level
1
2
3-4
5-6
Suitable for
Keeping food warm. Simmering small quantities (lowest power setting).
Simmering
Simmering larger quantities or roasting larger pieces of meat
until they are cooked through.
Roasting, getting juices.
7
8
Roasting.
Roasting (highest power output)
5. TROUBLESHOOTING
Error Code
Displayed
On Screen Possible Causes What to Do
E0
E1• Take the induction cook authorised Linarie Service
E5• Ensure the induction cooker works in
E6• Take the induction cooker to an
Induction
cooker
does not
function
Food is
not heated
• Non-compatible induction saucepan/
pot has been used
• Induction cooker has detected no pot
on the glass ceramic plate
• Induction cooker does not
work.
• Induction cooker has overheated.E2• Allow the appliance to cool down. Press Power
• The voltage is too high.E3• Ensure the induction cooker is plugged into a
• The voltage is too low.E4• Ensure the induction cooker is plugged into a
• Ambient temperature of the
environment is too low
• Induction cooker does not
work.
• Induction cooker is not
plugged in.
• Induction cooker is
plugged in.
• Non-compatible induction
saucepan/pot has been used.
• Compatible induction
saucepan/pot has been used.
• Use an induction compatible
saucepan/pot.
• Place an induction pot on the glass ceramic plate
and switch on the induction cooker.
Centre for inspection, repair and/or replacement.
On/Off button once, remove saucepan/pot and
allow the induction cooker to cool before switching
the power on.
230V or 240V power outlet.
230V or 240V power outlet.
room temperature environment.
authorised Breville Service Centre for
inspection, repair and/or replacement.
• Plug the power plug into the power outlet
and switch on the power outlet.
• Take the induction cooker to an authorised
Linarie Service Centre for
inspection, repair and/or replacement.
• Use an induction compatible
saucepan/pot.
• Take the induction cooker to an authorised
Linarie Service Centre for inspection, repair and/or
replacement.
If you have completed all of the above checks and is still experiencing difficulty,
please contact your local Linärie Service Center (see the “Warranty and Spare Parts” sections).
www.linarie.com.au
9
6. MAINTENANCE & CLEANING
GENERAL INFORMATION
Allow the appliance to cool down completely before cleaning and maintenance.
The surfaces and controls are susceptible to scratches and abrasion. Please observe the
following cleaning instructions.
WARNING
Observe all safety and warning information during operation (see the “General Safety Instructions”
section). Before maintenance or cleaning, the appliance should always be disconnected from the
power supply. Make sure that the appliabce is switched off and the plug has been removed.
Exterior surfaces are prone to scratches and dents. Therefore, please follow the cleaning
instructions to achieve the best possible result without damage.
Black crystal plate, operation plate cleaning
Slight dirt: wipe with a soft cloth.
Oil fouling: please use a soft cloth with a little neutral detergent, detergent powder or light powder.
Then wipe with a soft wet cloth to leave no residue.
Body cleaning:
Wipe with soft dry cloth, dust o ffof air inlet and air outlet, wait for complete air drying and then use.
Do not rinse directly with water or scrub in water.
Use cotton swab to remove dust on the surface of air inlet and air outlet.
Refer to cleaning and maintenance reminder in page 4.
If you have completed the above check and still having difficulty, please contact
your local Linarie Service Center. See “Warranty and Spare parts section”.
GENERAL INFORMATION
Allow the appliance to cool down completely before cleaning and maintenance.
The surface and controls are susceptible to scratches and
abrasion. Please observe the following cleaning instructions.
WARNING
Observe all safety and warning information during operation
(see the “General Safety Instructions” section).
Before maintenance or cleaning, the appliance should always be disconnected from
the power supply. Make sure that the appliance is switch off and the plug has been
removed. Exterior surfaces are prone to scratches and dents. Therefore, please follow
the cleaning instructions to achieve the best possible result without damage.
www.linarie.com.au
10
Safety notice
Please use the above
socket alone, do not plug
with other appliances
Do not insert iron wire
or other object in the air
vent or suction vent
Do not dry heating with empty
pot, so as not to affect the
.
Do not allow children to operate
alone, to avoid the risk of burns
and other hazards.
The induction cooker
should be put on the
flat surface and keep
10cm from the wall
Do not heat the iron plate
on the surface to avoid the
danger caused by high
temperature.
Clean often, avoid object goes
inside, a
.
If you are using a cardiac pacemaker,
please check with a professional
doctor before using it.
Please do not touch with your
hand during or after use, as the
surface remains hot.
Choosing the right cookware
Applicable pot, container: iron (enamel, cast, stainless steel)
bottom diameter bigger than 12cm or below than 26cm,
and the bottom must be flat.
Do not put the induction
cooker in high temperature
environment such as gas
stove and coal oil stove
Please open the lid of
canned food and other
food before heating to
avoid the risk of explosion.
Do not rinse the induction
cooker directly with water
Do not used on any iron
or metal platform, it may
cause fire alarm due to the
magnetic field effect
If the power cord is damaged,
a professional must be asked to
replace it.
stainless steel pot
Iron, stainless
steel flat pan
T
eppanyaki panFlat panComposite frying pan The big stock pot
Non - applicable pot, container: ceramic, glass, aluminum, anti - magnetic stainless steel for the
capacity of the material.smaller than 12cm,and the bottom not flat.
Aluminium potPan with a uneven bottomGlass potCeramic pot
www.linarie.com.au
11
7. ENVIRONMENTAL TIPS
Observe all safety and warning information during
operation (see the “General Safety Instructions” section).
Disposal considerations
The transport and protective packaging has been
selected from materials which are environmentally
friendly for disposal, and can normally be recycled.
Recycling the packaging reduces the use of raw
materials in the manufacturing process and also
reduces the amount of waste in landfill sites.
Ensure that any plastic wrappings, bags etc. are
disposed of safely and kept out of the reach of
babies and young children. Danger of suffocation.
Electrical devices marked with this label may
not be disposed of in domestic waste at the
end of their service life.
Electrical and electronic appliances often
contain valuable materials. They also contain
specific materials, compounds and components,
which were essential for their correct function
and safety. These could be hazardous to human
health and to the environment if disposed of
with your domestic waste or if handled incorrectly. Please do not, therefore, dispose of your
old appliance with your household waste.
Please dispose of those materials by contacting
your local authorities and ask for the correct
method of disposal. Please ensure that your
old appliance poses no risk to children while
being stored prior to disposal.
By disposing of this product in accordance with
the regulations, you protect the environment
and the health of those around you from
negative consequences.
8. WARRANTY & AFTER SALES SERVICE
Disposing of your old appliance
Observe all safety and warning information
during operation
(see the “General Safety Instructions” section).
In the event of a fault which you cannot remedy
yourself, please contact Linärie.
8.1 Warranty
The manufacturer’s warranty for this appliance
is 2 years.
8.3 Replacement of spare parts
Incorrect components can lead to personal
injury or damage to the appliance. Use only
genuine original Linärie spare parts.
Modifications, additions or alterations to the
appliance can lead to safety risks. If spare
parts or accessories from other manufacturers
are used, the warranty will be invalidated,
and Linärie cannot accept liability.
8.2 After sales service
The contact details for Linärie are given at the
beginning and of these instructions.
When contacting Linärie, please quote the model
and serial number of your appliance. These can
be found on the data plate, after removing the
grease filter.
Record model & serial number
Model:…………………………………………………………
Serial Number:.………………………………………………
Register your product
www.linarie.com.au
www.linarie.com.au
12
Please check
www.linarie.com.au
for more information.
13
Operating and installation instructions: Original √ Translation
The distribution and duplication of this document, as well as the use and disclosure of its contents
are prohibited unless expressly authorised.
These operating and installation instructions have been drawn up with the greatest of care. But it
cannot be ruled out that subsequent technical modifications have not yet been incorporated or
the relevant content has not yet been adapted. Please accept our apologies in this eventuality. An
updated version can be requested from our team. Subject to printing errors and mistakes.