Linak DESKLINE DL6, DESKLINE DL5 User Manual

Download

Page 1 of 32

LINAK.COM/DESKLINE

DL5/DL6 system with CBD6S

User manual

Page 2 of 32

Contents

Preface .............................................................................................................................................. 3

Valid for .............................................................................................................................................. 4

Important information .....................................................................................................................5

Safety instructions .......................................................................................................................... 5

General ....................................................................................................................................... 5

Before installation, reinstallation or troubleshooting ..................................................................... 6

Before start-up ............................................................................................................................ 6

During operation .......................................................................................................................... 6

Misc. ........................................................................................................................................... 6

Only for EU markets ........................................................................................................................ 7

Only for Non-EU markets ............................................................................................................... 7

Misuse ............................................................................................................................................ 7

Repairs ............................................................................................................................................ 8

Declaration of incorporation of partly completed machinery .................................................. 8

Misc. on the DESKLINE

DL5/DL6 system ...................................................................................... 9

Warranty....................................................................................................................................... 9

Maintenance................................................................................................................................. 9

Service of double-insulated products ............................................................................................. 9

ETL-markering ................................................................................................................................ 10

Description of the DESKLINE

DL5/DL6 system .......................................................................... 11

Mounting guidelines for the DESKLINE

DL5/DL6 system ........................................................ 12

Mounting of the foot part ........................................................................................................... 13

Mounting of the desk .................................................................................................................. 13

Mounting guidelines for the crossbar ........................................................................................ 14

Desks with crossbar .................................................................................................................... 15

Mounting guidelines CBD6S (SMPS) ............................................................................................ 16

Electric connection of the DL5/DL6 system ................................................................................ 17

Initialisation of the DESKLINE

DL5/DL6 parallel systems ....................................................... 18

Anti-Collision .................................................................................................................................. 19

PIEZO

description (optional) .................................................................................................... 20

Accessories and repair .................................................................................................................. 21

Disposal of LINAK products .......................................................................................................... 22

Labels ........................................................................................................................................... 23

Drawing appendix .......................................................................................................................... 24

Declaration of conformity ............................................................................................................. 28

Addresses ........................................................................................................................................ 32

Page 3 of 32

Preface

Dear User,

We are delighted that you have chosen a product from LINAK®. LINAK systems are high-tech products based on many years of experience in the manufacture and development of actuators, electric control boxes, controls and chargers.

This User Manual does not address the end-user. It is intended as a source of information for the manufacturer of the equipment or system only, and it will tell you how to install, use and maintain your LINAK electronics. It is the responsibility of the manufacturer of the end-user product to provide a User Manual where relevant safety information from this manual is passed on to the end-user.

We are sure that your LINAK product/system will give you many years of problem-free operation. Before our products leave the factory, they undergo full function and quality testing. Should you nevertheless experience problems with your LINAK product/system, you are always welcome to contact your local contact. LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which are always ready to help you.

LINAK provides a warranty on all its products. This warranty, however, is subject to correct use in accordance with the speciﬁcations, maintenance being done correctly and any repairs being carried out at a service centre, which is authorised to repair LINAK products. Changes in installation and use of LINAK products/systems can affect the operation and durability of the products/systems. The products are not to be opened by unauthorised personnel.

The User Manual has been written based on our present technical knowledge. We are constantly working on updating the information and we therefore reserve the right to carry out technical modiﬁcations.

LINAK A/S

Page 4 of 32

Valid for:

This User Manual is valid for the following products:

(See the ﬁrst 3 - 5 characters on the label)

Columns: 1 single DL5/DL6 or 2 in parallel

Control boxes: CBD6S 200 W, CBD6S 300 W

Controls: DP1U/DPF1M/DPG1M/DPG1B (if memory function is required) DP1C/DPT/DPF1C/DPG1C (if memory function and display is required) or DPA/DPB/DPH/DP1K/DP1V/DPF1K/DPG1K (if only up/down is required) or DPF1D (if display is required).

Page 5 of 32

Safety instruction

General

Important information

Important information on LINAK

products can be found under the following

headings:

Warning!

Failure to comply with these instructions may result in accidents involving serious personal injury.

Failing to follow these instructions can result in the product being damaged or being destroyed.

Safe use of the system is possible only when the operating instructions are read completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may result in serious damage to the system or one of its components.

It is important for everyone who is to connect, install, or use the systems to have the necessary information and access to this User Manual. Follow the instructions for mounting – there is a risk of injury if these instructions are not followed.

The appliance is not intended for use by young children or inﬁrm persons without supervision.

If there is visible damage to the product, do not install it.

Please note that during construction of applications in which the actuator is to be fitted, there must be no possibility of personal injury, for example squeezing of fingers or arms.

Assure free space for movement of the application in both directions to avoid blockades.

Page 6 of 32

Before installation, re-installation, or troubleshooting:

• Stop the DL5/DL6

• Pull out the mains plug.

• Relieve the DL5/DL6 of any loads, which may be released during the work.

Before start-up:

• Make sure that the system has been installed as instructed in this User Manual.

• Make sure that the voltage of the control box is correct before connecting the system to the mains.

• System connection. The individual parts must be connected before connecting the control box to the mains. See the User Manual for LINAK actuators, if necessary.

During operation

• If the control box makes unusual noise or smells, switch off the mains voltage immediately.

• Take care that the cables are not damaged.

• Unplug the mains cable on mobile equipment before moving it.

• The products must only be used in an environment that corresponds to their IP protection.

Misc.

The actuator system has a sound level below 55dB(A) in typical applications. Updated manuals and declarations can always be found here:

www.linak.com/deskline

Page 7 of 32

Only for EU markets

This appliance can be used by children aged from aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Only for Non-EU markets

Persons who do not have the necessary experience or knowledge of the product/products must not use the product/products. Besides, persons with reduced physical, sensory or mental abilities must not use the product/ products, unless they are under surveillance or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons.

Moreover, children must be under surveillance to ensure that they do not play with the product.

Misuse

Do not overload the actuators – this can cause danger of personal injury and damage to the system.

Do not use the actuator system for lifting persons. Do not sit or stand on a table while operating – risk of personal injury.

Do not use the system in environments other than the intended indoor use

Page 8 of 32

Repairs

In order to avoid the risk of malfunction, all DESKLINE® repairs must only be carried out by authorised LINAK workshops or repairers, as special tools must be used and special gaskets must be ﬁtted. Lifting units under warranty must also be returned to authorised LINAK workshops.

Warning!

If any of the DESKLINE

products are opened, there will be a risk of subsequent malfunction.

Warning!

The DESKLINE

systems do not withstand cutting oil.

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

LINAK A/S

Smedevænget 8

DK - 6430 Nordborg

Herewith declares that LINAK DESKLINE

products as characterized by the following models and types:

Control Boxes CBD6S

Linear Actuators DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23, LA31

Lifting Columns DL1A, DL2, DL4S, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15,

DL16, DL17, DL19, BASE1

Desk Panels DPA, DPB, DPH, DPF, DPG1K, DPG1M, DPG1B, DPG1C, DPT, DP1, DP1CS,

DP1K, DP1V, DP1U

RF Controls HB10RF, HB20RF, RFT, RFRL

Accessories BA001, SLS, Kick & Click

comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this documentation or part hereof will be transmitted by post or electronically to a reasoned request by the national authorities.

This partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the Machinery Directive 2006/42/EC where appropriate.

Nordborg, 2017-12-08

LINAK A/S

John Kling, B.Sc.E.E. Certification and Regulatory Affairs Authorized to compile the relevant technical documentation

Page 9 of 32

Misc. on the DESKLINE® DL5/DL6 system

This system is a DESKLINE system developed for desks and for indoor use in ofﬁces. Do not use it in industrial kitchens or in other enviroments that have to be cleaned with aggressive detergents. Do not bolt the legs to the ﬂoor so that free movement is prevented. This could cause serious damage to the legs in fault situations.

Warranty - 60 months on DESKLINE

This will be valid for all DESKLINE® products produced after 1 May 2015.

Products produced before 1 May 2015 will still be covered by 36 months.

Products used in DESKLINE applications: If these products are used in another application, they will be covered by 18 months warranty.

If there is any doubt that returned products are within the warranty period, this must be treated as if they are covered by the warranty. We recommend that you use the date of the control box or actuator as reference, if possible. We will have our purchase no. printed on the label.

Maintenance

Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and breaks. Inspect the connections, cables, and plugs and check for correct functioning as well as ﬁxing points.

Service of double-insulated products:

Class II

A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a safety electric earth connection (US: ground). The basic requirement is that no single failure can result in dangerous voltage becoming exposed so that it might cause an electric shock and that this is achieved without relying on an earthed metal casing. This is usually achieved at least in part by having two layers of insulating material surrounding live parts or by using reinforced insulation. There is no earthing/grounding means provided on the product, and no earthing/grounding means is to be added to the product. In Europe, a double insulated appliance must be labelled “Class II”, “double insulated” or bear the double insulation symbol (a square inside another square). Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualiﬁed service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.

Cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).