LM-HC-518 V1
第 1 页 共 18 页
Handset HC518
Contents
Preamble ............................................................................................................ 3
Safety regulations .............................................................................................. 4
Please keep these safety instructions! ................................................................ 5
Warning – danger from electric current .............................................................. 5
Caution – Damage of components! ................................ .................................... 6
Please observe during operation ........................................................................ 7
Product information ............................................................................................ 7
Survey ................................................................................................ ................ 8
Manufacturer’s declaration ................................................................................. 9
Installation ......................................................................................................... 9
Attention! ................................................................................................ ......... 10
Transport, unpacking and storage .................................................................... 11
........................................................................................................................ 13
Servicing and maintenance .............................................................................. 14
Guarantee ........................................................................................................ 15
Repairs ............................................................................................................. 16
Failure elimination ............................................................................................ 16
Solution ............................................................................................................ 16
LM-HC-518 V1
第 2 页 共 18 页
Disposal............................................................................................................ 17
Addresses ......................................................................................................... 18
LM-HC-518 V1
第 3 页 共 18 页
Preamble
We are delighted that you have purchased the high-quality wireless handset HC518
of limoss.
The handset HC518 intends to be used in the for the Electric furnitures as motor
controller for controlling the furnitures moving while the motor actuators inside
moving.
LM-HC-518 V1
第 4 页 共 18 页
Safety regulations
Please read the following safety advice carefully.
Ensure that every person involved in the installation, connection, or operation of the
equipment has been adequately briefed and has access to this technical
documentation.
See the user manual
Safety mark by TÜV
Indoor use only
EMC mark by TÜV
Some electrical and electrical equipments forbid to abandon and disposal at will
CE mark
limoss logo
LM-HC-518 V1
第 5 页 共 18 页
Please keep these safety instructions!
Read the instructions and notes carefully before you put the device into operation.
The safety instructions of the connected drive system have to be taken into
consideration also. Make sure that your staff that is occupied with connection,
mounting or usage is sufficiently informed and has access to this installation
instruction.
Warning – danger from electric current
Warning: Do not modify this equipment without authorization of the manufacturer!
Output the batteries from the HC518 before any maintenance operation, cleaning or
checking, in order to prevent any risk of electrocution.
- Never disassemble the HC518 by yourself, but take (or send) it to the aftersales service for any necessary control, maintenance or repair. Improper work or
tampering on the product is dangerous and voids the warranty.
- Never operate the HC518 if it is damaged. Damaged parts must be replaced
immediately.
Warning
Care must be taken when operating this equipment around other electromagnetic
equipment (such as HF device). Potential electromagnetic or other interference
could occur to this or to the other equipment. Try to minimize this interference by
not using other electromagnetic equipment in close proximity of it.
Caution-The system components must never be exposed to the effects of
solvents, or basic or alkaline liquids.
LM-HC-518 V1
第 6 页 共 18 页
Caution – Damage of components!
The electrical adjustment drive is not intended for use by small children or frail
persons.
The electrical adjustment drive isn’t a toy for children.
The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
LM-HC-518 V1
第 7 页 共 18 页
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
Please observe during operation
Watch for unusual sounds or irregular function. System must be shut down on
strange behavior.
The devices must not be dunked into water.
Product information
LM-HC-518 V1
第 8 页 共 18 页
The handset HC518 intends to be used in the for the Electric furnitures as motor
controller for controlling the furnitures moving while the motor actuators inside
moving.
This device must not be used:
- Within an environment, where flammable or explosive gases/vapors can be
expected
- In a damp environment (offshore-facilities, seaside), or outdoor
- With a medical product, e.g. for the installation in a medical product
- In planes or other aircrafts
- In nuclear power plants
The manufacturer of the adjustable product is committed to take qualified
precautions, to prevent persons from injuries and objects from damage, while their
products are in use.
Survey
-Bluetooth 4.0 hand control
-Black and white color housing.
LM-HC-518 V1
第 9 页 共 18 页
-Up to 7 buttons optional
-CR2032 battery
-Antenna gain: 0 dBi
-RF frequency: 2401-2480 MHz
-Output rate: -2 dBm
Manufacturer’s declaration
Limoss Group or its representatives does not permit linear actuators to be
commissioned in an appliance, before the said appliance (object) in which the linear
actuator is installed, has been declared to conform to the provisions of all the
relevant regulations.
Installation
1、Please make sure that the actuator or the control box connects to SMPS.
LM-HC-518 V1
第 10 页 共 18 页
2、Please put the button battery into handset, after 5 second then it works.
3、Applicable Battery Type ：
3.0V Lithium Battery Coin Cells\
Model：CR2032
Max.Size ：Φ20.0X3.2mm
Nominal Voltage ：3.0V
Attention!
LM-HC-518 V1
第 11 页 共 18 页
1. This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
2. Children should be supervised to ensure that they do not play with the appliance.
3. Care must be taken when operating this equipment around other
electromagnetic equipment (such as HF device). Potential electromagnetic or
other interference could occur to this or to the other equipment. Try to minimize
this interference by not using other electromagnetic equipment in close proximity
of it.
Attention!
limoss linear actuators are not suitable for the following applications:
• Off-shore systems
• Marine applications
• In aeroplanes or other aircraft
• In potentially explosive areas
• In nuclear power stations
The system components must never be exposed to the effects of solvents,
or basic or alkaline liquids.
Transport, unpacking and storage
LM-HC-518 V1
第 12 页 共 18 页
Keep the original packaging in order to ship the device if there should be a
guarantee case. Protect the device from severe mechanical stress during transport.
Always transport the device in the original packaging. The installed components are
sensitive to impact and strong vibration.
Proceed as follows to unpack the device:
We recommend inspecting the device for transport damage immediately after it is
delivered. Only acknowledge receipt with reservation (for example on the freight
document), if there is reason to suspect damage. Note the presumed damage on
the freight document and inform the manufacturer.
Carefully remove the packaging. If there is no appropriate agreement concerning
the take-back of packaging material, the packaging remains with the customer.
Environmentally responsible disposal must be ensured in accordance with applicable
disposal guidelines.
Caution – Condensation of water!
Condensation of water is possible due to temperature fluctuations. This can destroy
the device or subsequent malfunctions can result.
Therefore:
After storage or transport in cold weather, or if there are extreme temperature
fluctuations, the device must slowly adjust to the ambient temperature at the
implementation site before it is started up.
If condensation has formed, the device should only be placed in service after a
waiting period of 12 hours.
Attention!
The actuators are designed for use indoors.
Operating temperature: 0°C to 40°C, air humidity: 20 % to 80 %
Transportation and storage conditions: Temperature-20°C to 60°C, air humidity:
5 % to 95 %
Atmospheric pressure range of 76 kPa to 106 kPa
Actuators with special protection categories are labeled accordingly.
LM-HC-518 V1
第 13 页 共 18 页
LM-HC-518 V1
第 14 页 共 18 页
Servicing and maintenance
All components must be regularly checked visually for mechanical damages,
deterioration and for proper function. The control intervals should not exceed 6
months when motor is in regular use. The inside components do not need any
maintenance unless expressly recommended elsewhere.
Caution – Damage to finish of product!
- Do not use any detergents with solvents! Use a standard household cleaner,
suitable for plastic material!
- High levels of internal moisture can cause a short-circuit!
- Never clean with high-pressure cleaner!
LM-HC-518 V1
第 15 页 共 18 页
Guarantee
The limoss guarantee applies to production-related faults and is valid from the date
of manufacture.
The date of manufacture can be found on the label. Further details regarding the
guarantee can be obtained from your limoss dealer.
The guarantee only extends to the value of the limoss product in question. The
limoss guarantee only applies if the equipment has been used for its intended
purpose and serviced properly.
No unauthorised alterations may be carried out. Improper handling, such as
knocking, hitting, or forcing, shall render all guarantees null and void.
LM-HC-518 V1
第 16 页 共 18 页
Repairs
If faults should arise within the guarantee period, it is important that you send the
actuators in for repairs, since the guarantee becomes invalid if the actuators are
opened by un-authorized individuals. To avoid risks during subsequent use, all
repairs should be carried out by authorised service companies.
Interventions or modifications could lead to consequential damage.
You can also arrange with our service department for spare parts to be sent to you,
if necessary. In this case, please state the article number printed on the type plate.
Failure elimination
Analysis
In case of failure, try to solve the issue by testing following list of possible causes.
In case of other failure contact the supplier/shop.
Problem
Hand-control is energized/ Motor does not react.
Solution
1. Check the power cord of the furniture is properly plugged in.
2. Check the battery is properly installed.
3. If possible, unplug the furniture and replace battery of the hand-control, then
test again
4. If these test fail to help, contact the supplier / shop.
LM-HC-518 V1
第 17 页 共 18 页
Disposal
Do not dispose of this product with the normal household waste!
This product must be disposed of properly as electronic waste in accordance with
the current disposal regulations of your district/country.
LM-HC-518 V1
第 18 页 共 18 页
Addresses
Manufacturer
limoss (Dongguan) Co., Ltd.
Block A, No. 39 Southern 5th Street, Qiaodong Road, Wuxia Village, Qiaotou Town,
Dongguan City, Guangdong Province, 523540, P.R. China
Factory
limoss (Dongguan) Co., Ltd.
Block A, No. 39 Southern 5th Street, Qiaodong Road, Wuxia Village, Qiaotou Town,
Dongguan City, Guangdong Province, 523540, P.R. China
Factory II
limoss GmbH & Co. KG
Oberwengerner Str. 204 D-58300 Wetter, Germany
Tel. +49 23 35 / 84 7 13-0
Fax +49 23 35 / 84 7 13-29
limoss@limoss.de
www.limoss.de
Loading...