limoss HC370 Users Guide

linear
motion
systems

Cinema Seat

Mass Open/Close

Wall Box

Transmitter

Product Specification

Mass Open/Close system

Wall Unit

2016.09.22

2

GL-TE-017(V06)

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Any changes or medications not expressly approved by party responsible for compliance could void the
user’s authority to operate the equipment.

This equipment should be installed and operated with minimum distance 20cm between rotation & your
body.

RSS-Gen & RSS-210 Statement:

"This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement."

RSS-102 Statement:

"This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled
environment. "
"Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un
environnement non contrôlé. "

Mass Open/Close system

Wall Unit

2016.09.22

3

GL-TE-017(V06)

Description

This system is designed for cinema seats mass open and close. With one wall unit box could control up 100
sets seats open and close at one time.

Technical Parameter

Mass Open and Close Wall Box

Model: HC370 602087
Dimension:250x200x100mm
AC Input: 100~240VAC,50/60Hz,1.6A ~0.7A
Akku Pack

 Cell:18650x3
 Rated Capacity: 16.2Wh

Wireless Parameters

 RF Frequency: 2.4GHz
 Working mode: Broadcasting only
 Control Range: >50m in open space

Connection:

 Antenna Connector: SMA female
 US AC cable 1400mm (Optional)

Key selector switch

 3 position with return in center and key

LED Indicator

 Green: Working
 Red: Pairing

Reset

 Press the reset button to reset the transmitter if system halted.
Certifiaction:
CE/FCC/cTUVs/

Mass Open/Close system

Wall Unit

2016.09.22

4

GL-TE-017(V06)

Description for system

1． Front panel

2. Top side: SMA Antenna Connector

Pairing Mode Indicator

Working Mode Indicator

Mass Close
Position

Mass Open
Position

Standby
Position

Female SMA-J Socket for
antenna /extension cable

Key selector switch

Reset Button

Mass Open/Close system

Wall Unit

2016.09.22

5

GL-TE-017(V06)

3. AC input with PG7 Connector

4. Inside Box

AC Power
Terminal lock

Transmitter:MC230

Connector to
Front panel

SMPS+Akku:
MC165+130

The AC Power Input
(Cable gland optional)

US AC Cable:
1400mm (Optional)

Mass Open/Close system

Wall Unit

2016.09.22

6

GL-TE-017(V06)

5. Front Panel

6. Accessary

 2.4GHz 5dBi antenna x1

 Antenna Extension Cable 2m x1

Key selector switch

Terminal

LED Indicator

Face plate connector

T-Plug for Reset

Mass Open/Close system

Wall Unit

2016.09.22

7

GL-TE-017(V06)

 Antenna Front Panel

 The way to assemble the face plate with antenna and extension cable.

Mass Open/Close system

Wall Unit

2016.09.22

8

GL-TE-017(V06)

Label

Operation Instruction:

Before all operation, please connect transmitter box to AC power, plug the receiver box MC250 to
L1 actuator.

Pairing

1. Transmitter box:

 Turn the key left to position Open, turn right to position Close, and turn left to position Open again

in 3 seconds, the pairing LED will light on, the transmitter is pairing mode.

 Turn the key any direction will exit paring mode

2. Receiver box

press both buttons of handset for 5 seconds, if transmitter box is in paring mode, the motor will drive
out and in for twice in 4 seconds, then the paring is finished.

Operation:

 Turn key to position Open to let all seats open
 Turn key to position Close to let all seats close
 Release the key to position I to standby.

Remark:

If turning the key switch 2.5 times within 1 seconds, the operation will be disabled for 5 s, and the working
LED indicator will be flashing to prevent user playing with the system.

Mass Open/Close system

Wall Unit

2016.09.22

Revised history

Item

Change content

Index

Revised date

1

First issue

00

2015.12.31

2

Add the picture and description

01

2016.02.02

3

Add drawing and detail description

02

2016.05.30

4

Add the Reset button, change 1& 2 to open and close

03

2016.08.23

5

Add the Reset text on the face plate, update with new lock, add the AC
cable

04

2016.09.06
6

Correct the label art. No.

05

2016.09.06

7.

Add FCC statement and IC caution , add certification list

06

2016.09.22