Lillian August LIGU1382 Specifications

Pattern

Lot

52.1 cm x 5.5 m, 2.85 m

Design Repeat Design Match -

Preparaon

Make sure to purchase all of the rolls needed to complete your project in

Make sure to purchase all of the rolls needed to complete your project in one single order to ensure you receive the same dye lot. Aer receiving the

one single order to ensure you receive the same dye lot. Aer receiving the

one single order to ensure you receive the same dye lot. Aer receiving the product conﬁrm that the paern number and dye lot number match for all

product conﬁrm that the paern number and dye lot number match for all

product conﬁrm that the paern number and dye lot number match for all rolls. The wall surface should be clean, dry, smooth and free from mildew.

rolls. The wall surface should be clean, dry, smooth and free from mildew.

rolls. The wall surface should be clean, dry, smooth and free from mildew. We recommend not using NEXTWALL products on textured walls; over

We recommend not using NEXTWALL products on textured walls; over

We recommend not using NEXTWALL products on textured walls; over exisng wallpaper, brick, cinderblock, non-sck paint, unpainted drywall,

exisng wallpaper, brick, cinderblock, non-sck paint, unpainted drywall,

exisng wallpaper, brick, cinderblock, non-sck paint, unpainted drywall, outdoor surfaces, or plaster. Allow newly painted surfaces to fully cure for 4

outdoor surfaces, or plaster. Allow newly painted surfaces to fully cure for 4

outdoor surfaces, or plaster. Allow newly painted surfaces to fully cure for 4 weeks before applying.

weeks before applying.

Hanging Instrucons

1. These wallcoverings are inspected and tested - however, they should

1. These wallcoverings are inspected and tested - however, they should be checked for defects before hanging. We will replace defecve

be checked for defects before hanging. We will replace defecve

be checked for defects before hanging. We will replace defecve merchandise but assume no responsibility for labor charges for the

merchandise but assume no responsibility for labor charges for the

merchandise but assume no responsibility for labor charges for the applicaon or removal of any wallcoverings or for improper hanging.

applicaon or removal of any wallcoverings or for improper hanging.

applicaon or removal of any wallcoverings or for improper hanging. The installaon of more than 1 strip constutes acceptance of the

The installaon of more than 1 strip constutes acceptance of the

The installaon of more than 1 strip constutes acceptance of the product.

product.

2. Starng on the le side of your wall or surface, measure out from the

2. Starng on the le side of your wall or surface, measure out from the corner 20.5” or 27” depending on the width of the product and mark

corner 20.5” or 27” depending on the width of the product and mark

corner 20.5” or 27” depending on the width of the product and mark the wall lightly with a pencil. Using a level, draw a straight vercal line.

the wall lightly with a pencil. Using a level, draw a straight vercal line.

the wall lightly with a pencil. Using a level, draw a straight vercal line. This line is the guide for your ﬁrst strip so it is important that it is

This line is the guide for your ﬁrst strip so it is important that it is

This line is the guide for your ﬁrst strip so it is important that it is straight. If installing a feature wall it is recommended to start

straight. If installing a feature wall it is recommended to start

straight. If installing a feature wall it is recommended to start installaon in the middle of the wall instead to create symmetry.

installaon in the middle of the wall instead to create symmetry.

3. Peel about 12” (30.48cm) of the backing away from the paper. Apply

3. Peel about 12” (30.48cm) of the backing away from the paper. Apply the paper to the top of the wall, allowing that 1-2 extra inches to

the paper to the top of the wall, allowing that 1-2 extra inches to

the paper to the top of the wall, allowing that 1-2 extra inches to overlap the ceiling which will be trimmed oﬀ later. Align the right side

overlap the ceiling which will be trimmed oﬀ later. Align the right side

2

20.5 in x 6.0 yd, 30.75 ft

2

of the strip with your vercal line and lightly press the edge to the wall

of the strip with your vercal line and lightly press the edge to the wall along the line. If needed you can reposion to ensure a vercal seam.

along the line. If needed you can reposion to ensure a vercal seam.

along the line. If needed you can reposion to ensure a vercal seam. Working from the top to the boom, pull the backing away from the

Working from the top to the boom, pull the backing away from the

Working from the top to the boom, pull the backing away from the paper as you evenly press the paper to the wall. Do not force the paper

paper as you evenly press the paper to the wall. Do not force the paper

paper as you evenly press the paper to the wall. Do not force the paper and be careful not to pull or stretch the product or the paern will not

and be careful not to pull or stretch the product or the paern will not

and be careful not to pull or stretch the product or the paern will not align. To achieve the best results we recommend having one person

align. To achieve the best results we recommend having one person

align. To achieve the best results we recommend having one person guide the paper at the top and along the seam, while the second holds

guide the paper at the top and along the seam, while the second holds

guide the paper at the top and along the seam, while the second holds the opposite edge away from the wall unl the seams are aligned. We

the opposite edge away from the wall unl the seams are aligned. We

the opposite edge away from the wall unl the seams are aligned. We advise that you overlap the seam between neighboring panels by 1/16

advise that you overlap the seam between neighboring panels by 1/16

advise that you overlap the seam between neighboring panels by 1/16 inch to avoid any shrinking that may occur due to varying room

inch to avoid any shrinking that may occur due to varying room

inch to avoid any shrinking that may occur due to varying room temperatures.

temperatures.

4. Using a wallpaper smoothing tool and moderate pressure, make your

4. Using a wallpaper smoothing tool and moderate pressure, make your way down the wall smoothing the material from the middle of the

way down the wall smoothing the material from the middle of the

way down the wall smoothing the material from the middle of the panel outwards to push out any air bubbles and ensure ﬁrm adhesion.

panel outwards to push out any air bubbles and ensure ﬁrm adhesion.

5. Trim oﬀ the excess material at the ceiling and baseboard with a ruler

5. Trim oﬀ the excess material at the ceiling and baseboard with a ruler and sharp razor. Be sure to change the blade oen to maintain a

and sharp razor. Be sure to change the blade oen to maintain a

and sharp razor. Be sure to change the blade oen to maintain a smooth, clean cut.

smooth, clean cut.

6. Repeat this process matching the paern of your next strip to the right

6. Repeat this process matching the paern of your next strip to the right edge of your previous strip and overlapping slightly.

edge of your previous strip and overlapping slightly.

Removal

To remove NEXTWALL products, slowly pull the edge from the top corner

To remove NEXTWALL products, slowly pull the edge from the top corner directly downward. NEXTWALL products can be reposioned and easily

directly downward. NEXTWALL products can be reposioned and easily

directly downward. NEXTWALL products can be reposioned and easily removed.

removed.

Cleaning

NEXTWALL products may be wiped clean with a damp cloth. We do not

NEXTWALL products may be wiped clean with a damp cloth. We do not recommend using excess liquid as it may damage the product.

recommend using excess liquid as it may damage the product.