Liliputi MAMA COAT Instructions For Use Manual

UsingtheBabywearingInsert

Apply the babywearing insert BEFORE wearing the

coat. How to apply the insert? It is very easy! For front

carry you only need to zip one side of the insert into

the Liliputi Mama Coat front zip. (pic 1.)

And how to use the insert for back carry? This might

look difficult but with a little practice it is really easy.

Open the zip in the back of the coat and zip the

babywearing insert both side. (pic 2.) Open as many

snaps out of 6 as needed to fit your baby comfortably

in. Make sure that it is neither too tight nor too loose.

WearingandAdjustingtheCoat

For front carry, first put your baby in a suitable baby

carrier in upright position, then put the coat on. Zip the

other side up and adjust the size with the 3 cords (pic 1.)

For back carry swing the coat to your back in a way that

your baby´s head goes through the hole that the

babywearing insert leaves in the back of the coat. Then

zip them up. There is another way to put it on. Hold the

coat in front of you from the upper part with the inside

facing out. Flip the jacket over you and your baby. Put

your arms in the sleeves and let your baby's head pass

through the back hole. Adjust the size with the 3 cords

(pic 1.) and also you can adjust the opening of the back

panel of the coat from the inside (pic 2.)