Multiple Pan/Tilt/Lens Control
PIH-308/308-24
INSTRUCTION MANUAL
PRECAUTIONS
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat sources.
Do not expose this unit to rain , moisture , smoke or dust environment.
Do not cover the opening of the cabinet with cloth and plastic or to install this unit
in poor ventilated places. Allow 10cm between this unit and its surroundings.
Do not continue to operate the unit under abnormal conditions such as detection
of smoke, strange smell or no display on screen while power is turned on.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Do not operate this unit near magnet, speaker system, etc., to avoid unnecessary
magnetic interference.
Do not drop metallic parts through slots.
Connection cables should be grounded properly.
It will cause damage to the equipment.
The presents of flammable gas or object in the operating environment or exposing this
unit to direct sunlight may cause fire and severe injury.
May cause short circuit, fire and serious damage to this unit.
Unplug this unit and have it checked by qualified service personnel.
May cause overheat. The normal operating temperature is 0 C ~ 40 C.
Contact qualified service personnel for help.
May cause short circuit or electric shock.
May cause fire or shock hazard.
These interference will cause color confusion and screen fluctuation.
This could permanently damage the appliance.
Sudden surge such as lightening will damage the system permanently.
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT OPEN COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
to constitute a risk of electric shock to persons.
the literature accompanying the unit.
1
PREFACE
Thank you for choosing PIH-308/308-24 Multiple Pan/Tilt/Lens
Control. For trouble free installation and optimum performance
please read this manual thoroughly before attempting installation
or operation.
CONTENTS
1. Front Panel
2. Rear Panel
3. Interconnecting Diagram
4. Remarks
5. Specifications
2
3
4
4
5
Page
2
1. FRONT PANEL
PIH-308
LENS SELECT
RESET
CLOSE TELE FAR
IRIS
OPEN
ZOOM
WIDE
FOCUS
NEAR
UP LEFT
DOWN RIGHT
LENS
SPEED
SF
MULTIPLE PAN/TILT/LENS CONTROLS
RESET
PAN/TILT SELECT
LEFT/RIGHT LOCK
POWER
1345689 71012
211
POWER SWITCH
PAN/TLLT/SELECT: Setting switches for manual control of pan/tilts.
LEFT/RIGHT LOCK: Double-color switches which will go panning automatically when
indicator lamp of switches turns to green.
RESET: To reset manual mode of pan/tilt.
LEFT/RHGIT: To select panning direction when manual mode is preseted.
UP/DOWN: To select tilting direction when manual mode is preseted.
LENS SPEED: To adjust speed of FOCUS/ZOOM/IRIS.
FOCUS (NEAR/FAR): To adjust FOCUS/ZOOM/IRIS to get a fine picture.
ZOOM (WIDE/TELE)
IRIS (OPEN/CLOSE)
LENS SELECT: Setting switches for control of definite lens.
RESET: To reset selecting of lens.
: To adjust FOCUS/ZOOM/IRIS to get a fine picture.
: To adjust FOCUS/ZOOM/IRIS to get a fine picture.
1
2
3
4
5
6
7
8
9
10
11
12
3
2. REAR PANEL
FUSE
AC INPUT
FUSE HOLDER
54321
PAN/TILT OUTPUT
54 321
IRIS/ZOOM/FOCUS OUTPUT
4321
AC INPUT
FUSE HOLDER
PAN/TILT OUTPUT: 6P Connector.
1. Auto
2. Common
3. Down
4. Up
5. Right
6. Left
IRIS/ZOOM/FOCUS OUTPUT: 6P Connector.
1. Grounding
2. IRIS
3. No Connection
4. Zoom
5. Focus
6. No Connection
1
2
3
4
1
2
6
3
5
4
1
2
6
3
5
4
3. INTERCONNECTING DIAGRAM
PAN/TILT OUTPUTS
1
2
6
3
5
4
1
2
3
4
5
6
AUTO
COMMON
DOWN
UP
RIGHT
LEFT
LENS OUTPUTS
1
2
6
3
5
4
1
2
3
4
5
6
GROUNDING
IRIS
NO CONNECTION
ZOOM
FOCUS
NO CONNECTION
4. REMARKS
a. The PIH-308 controls 5 sets of PAN/TILTS which are fed AC input of 117V or 230V
(potion).
4
INPUT
a.c. 117V
or
a.c. 230V
PIH-308
OUTPUT
a.c. 117V OR a.c. 230V (FOR PAN/TILTS)
DC 12V .................... (FOR LENS)
b. The PIH-308-24 offers a.c. Input of 24V by adding an external power supplier (PS-10).
INPUT
a.c. 117V
or
a.c. 230V
a.c. 24V
Converter
PS-10
OUTPUT
a.c. 24V
PIH-308-24
OUTPUT
DC 12V (FOR LENSES)
a.c. 24V (FOR PAN/TILTS)
5
6. SPECIFICATIONS
Input/Output Voltage
Model No.
Pan/Tilt Control Buttons
Direction Control
Focus
Zoom
Iris
Lens Speed
Lens Output Voltage
Power Consumption
Input/Output connector
Position Indicator
Construction
Dimension
Weight
Push button / Rocker and paddle switch
UP/DOWN , LEFT/RIGHT
NEAR/FAR switchable
WIDE/TELE switchable
OPEN/CLOSE switchable
Knob control
3V ~ 9V DC, 300mA
8 Watts
DIN
Double-Color LED
Steel, with silver gray baked enamel finish
384(W) x 60(H) x 252(D) mm
4.3 kg
117/230Va.c. , 50/60Hz
PIH-308
PIH-308 / PIH-308-24 MULTIPLE PAN/TILT/LENS CONTROL
PIH-308-24
24Va.c. , 50/60Hz
Input Voltage
Output Voltage
Current
Construction
Dimension
Weight
24 v.a.c.
8Amp
Aluminum
210(W) x 110(H) x 195(D) mm
3.9 kg
PS-10 POWER SUPPLIER
117V/230V/240V a.c.
PAN-TILT
PIH-303
PAN-TILT
PIH-303
PAN-TILT
PIH-303
PAN-TILT
PIH-303
PAN-TILT
PIH-303
PIH-308
LENSSELECT
RESET
CLOSE TELE FAR
IRIS
OPEN
ZOOM
WIDE
FOCUS
NEAR
UP LEFT
DOWN RIGHT
LENS
SPEED
SF
MULTIPLEPAN/TILT/LENSCONTROLS
RESET
PAN/TILTSELECT
LEFT/RIGHTLOCK
POWER POWER
Outdoor Pan/Tilt
Outdoor Pan/Tilt
Indoor Pan/Tilt
Indoor Pan/Tilt
Indoor Pan/Tilt
Video Out
Video Out
Video Out
Video Out
Video Out
Video Out
1-6 Position Auto
Switcher
Monitor
AC Output
AC Output
AC Output
AC Output
AC Output
PIH-308/PIH-308-24
Multiple Pan/Tilt/Lens Control
PS-10
Power Supplier
(Used in PIH-308-24)
6
66-308CSE-1
AC Input
Multiple Pan/Tilt/Lens Control
PIH-308/308-24
66-308CSE
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com
Loading...