Lilin PIH-0368X WN IP, PIH-0368X SN IP, PIH-0384X SN IP, PIH-0388X SN IP, PIH-0368X WP IP Instruction Manual
...
D/N VARI-FOCAL IP IR CAMERA
PIH-0364X/0368X/0384X/0388X W/S N/P IP
PIH-0364X/0368X/0384X/0388X W/S N/P IP H
INSTRUCTION MANUAL
All the safety and operating instructions should be read before the unit is operated.
The safety and operating instructions should be retained for future reference.
All warnings on the unit and in the operating instructions should be adhered to.
All operating and user instructions should be followed.
Only a qualified electrician should make electrical connections.
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
All cable runs must be within permissible distance.
This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight
of the unit.
IMPORTANT SAFEGUARDS
SAFETY PRECAUTIONS
1. Read Instructions
2. Retain Instructions
3. Head Warnings
4. Follow Instructions
5. Electrical Connections
6. Attachments
7. Cable Runs
8. Mounting
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT OPEN COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
to constitute a risk of electric shock to persons.
the literature accompanying the unit.
Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears
to have been damaged in shipment, replace it properly in its carton and notify the shipper.
Be sure to save:
1. The shipping carton and packaging material. They are the safest material in which to make future shipments
of the equipment.
2. This Installation and Operating Instruction.
If the unit ever needs repair service, the customer should contact our dealer or branch for authorization to
return and shipping instructions.
UNPACKING
SERVICE
Do not drop or strike this equipment.
Do not install the equipment near any naked flames or heat sources
Do not expose this unit ot rain, moisture, smoke or dust environment.
Do not cover the opening of the cabinet with cloth and plastic or to install this unit in poor
ventilated places. Allow 10cm between this unit and its surroundings
Do not continue to operate the unit under abnormal conditions such as detection of smoke,
strange smell or no display on screen while power is turned on.
Do not touch the power connection with wet hands.
Do not damage the power cord or leave it under pressure.
Do not operate this unit near magnet, speaker system, etc., to avoid unnecessary magnetic
interference.
Connection cables should be grounded properly.
Caution
Executive Summary
PIH-036 /038 X W/S N/P IP & IPH (PIH-036/038IP) is a cost-effective and high performance
IP IR Camera. High quality JPEG video can be transmitted over Internet. Build-in pushbutton
key allows configuring IP address easily at installation site via a hand-held analog monitor.
The combination use of dynamic global IP address by PPPoE and DDNS services provides the
most economic way for Internet access.
FTP continuous recording, remote PC recording, motion triggering FTP recording, and HTTP-
based email notification can provide recording capability in various mediums.
These standard JPEG recording images are easy to access. There is no software installation
required for accessing these recorded images. PIH-036/038IP adopts most recent technologies
to ensure the security and flexibility.
PIH-036/038IP provides useful Internet protocols including ARP, NTP, PPPoE, DDNS, DHCP,
FTP, and SMTP. HTTP-based API (application programming interface) allows developers to
integrate PIH-036/038IP with their existing products for these advance Internet protocols.
With all the features, PIH-036/038IP is ideal solution for remote video monitoring via Internet.
Trademark Acknowledgments
Windows, Linux, Microsoft, Internet Explorer, DynDNS are registered trademarks of the
respective holders.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other countries.
Other names of companies and their products mentioned in this manual may be trademarks or
registered trademarks of their respective owners.
Other Reference
Merit Lilin IP-based product's full features can be accessed via HTML configuration page.
For advanced HTTP network setting or development, please refer to HTTPAPI document in the
product CD.
1
Table of Contents
Chapter 1 Part Description & Dimension
Chapter 2 Installation
Chapter 3 System Overview
Chapter 4 PIH-036/038IP System Architectures
Chapter 5 Before Access PIH-036/038IP
Chapter 5-1. Configure IP Address Using IPScan Utility
Chapter 5-2. Configure IP Address Using Pushbutton Key
Chapter 5-2-1. Setup IP Address
Chapter 5-3. Configure IP Address Using HTML Page
Chapter 5-4. Internet Browser Setting & Software Component Required
Chapter 5-5. Advance Network Port Forwarding Technology
Chapter 5-6. Advance Network DDNS and PPPoE Technologies
Chapter 5-7. Reset Default
Chapter 5-8. IR-CUT Activation
Chapter 6 Live Monitoring
Chapter 6-1. Login
Chapter 6-2. Menu Systems
Chapter 6-2-1. Video Property
Chapter 6-2-2. Recording
Chapter 6-2-3. Zoom
Chapter 7 Start Using PIH-036/038IP Network Features
Chapter 7-1. PIH-036/038IP Operational HTML Page
Chatper 7-2. PIH-036/038IP Configuration
Chapter 7-2-1. Server Settings
Chapter 7-2-2. General Network Settings
Chapter 7-2-3. User Settings
Chapter 7-2-4. Timer
Chapter 7-2-5. System Setting
Chapter 7-3. Network
Chapter 7-3-1. General Settings
Chapter 7-3-2. DHCP Setting
Chapter 7-3-3. PPPoE Settings
Chapter 7-3-4. DDNS Settings
Chapter 7-4. Alarm Settings
Chapter 7-4-1. Motion Setup
Chapter 7-4-2. Motion Area
Chapter 7-5. Video Settings
Chapter 7-5-1. Text Stamp
Chapter 7-5-2. Video
Chapter 7-5-3. IR Cut Removable
Chapter 8 Specifications
Chapter 8-1. Camera
Chapter 8-2. IP System
2
3
3
6
6
7
7
8
8
9
9
10
10
11
11
12
12
12
13
13
13
14
14
15
15
15
15
16
16
17
17
18
18
18
19
19
20
21
21
21
21
22
22
26
Unit : mm
105
112
347
387
211.5
82.55
SUN SHIELD
TOP COVER
BOTTOM CHASSIS
BRACKET
PAN ADJUSTMENT SCREW
TILT ADJUSTMENT SCREW
WINDOW
SENSOR CAP
3
Chapter 1. Part Description & Dimension
Chapter 2. Installation
1. Take out the bracket from the box first. Put the power cable, RJ-45 network cable and video
cable through the bracket and then fix it ot the wall (FIG.1 & FIG.2)
FIG. 1 FIG. 2
4
2. Secondly, take out the camera body and open the top cover with screw driver (FIG.3)
FIG. 3
3. Put the power cable, RJ-45 network cable and video cable through the bracket rubble first and
then go through the bottom of camera body (FIG.4). Plug and fix the power cable to the terminal,
plug the RJ-45 network cable to RJ-45 LAN connector, and plug the video cable to output of the
camera (FIG.5).
FIG. 4
FIG. 5
FIG. 6
4. Next, use the provided 1/4"-20UNC screws (silver-4pcs) to fix the camera body on the bracket
with hexagon screw driver (FIG.6)
LN
Note :
When using two-cord
power cable, please
connect them to
"Live" and "Neutral".
Live
Earth
Neutral
FOCUS or ZOOM
IRIS LEVEL
VR
5
FIG. 7
FIG. 8
5. Loosen the pan and tilt adjustment screw on the bracket to turn the camera body to the desired
angle and then tighten the screws (FIG.7)
6. First, adjust the lens on focus and zoom to form the optimal video image after that tighten the
screws. Adjust the IRIS level VR to form the optimal image brightness (FIG.8). Please refer to
Chapter 5 Before Access PIH-036/038IP.
FIG. 9 FIG. 10
7. Replace the top cover and tighten the screws (FIG.9 & FIG.10)
ZOOM or FOCUS
6
Chapter 3. System Overview
Top View
Power LED indicator (Green LED)
Key RESET
Key SET
Key MENU
Key SELECT
IP Setup Mode/Live Video Looping
Mode Switch (SETUP/LIVE)
BNC analog video output
RJ-45 LAN connector
Input/Output Device Component
Description
Chapter 4. PIH-036/038IP System Architectures
For connecting PIH-036/038IP to the network, please follow one of the system architectures:
Hardware Installation for LAN access
HUB
Internet / Ethernet
Lan
Hardware Installation for Internet access
HUB
Lan
Router
SETUP LIVE
Chapter 5. Before Access PIH-036/038IP
Before accessing PIH-036/038IP, make sure that camera's analog BNC output, RJ-45 network
cable, and PIH-036/038IP's power cable are properly installed. For setup IP address, please
consult your network administrator for available IP addresses. The default IP address of PIH-036/
038IP is 192.168.0.100. User can also use default IP address to verify PIH-036/038IP's network
connection.
7
Chapter 5-1. Configure IP address using IPScan Utility
To configure IP address using IPScan utility, copy IPScan application from installation CD to
your local PC or execute IPScan software from installation CD directly. To change IP address,
subnet mask, gateway, or HTTP port, please follow steps below:
1. Run IPScan utility.
2. Click on Refresh button. All available devices get listed in Device list box.
3. Select the device item in Device list box.
4. Edit or modify addresses in IP, Subnet Mask, Gateway, or HTTP Port edit box.
5. Click on Apply button to configure the settings.
6. Click on Refresh button to verify the settings.
8
Chapter 5-2. Configure IP Address Using Pushbutton key
To setup IP address using pushbutton key, please follow these steps:
1. Connect PIH-036/038IP's analog video output to a monitor.
2. Set the mode switch (IP setup mode) to SETUP.
3. Press MENU button.
4. Press RESET button.
5. Release RESET button.
6. Release MENU button entering the menu system.
7. Follow the Menu displayed on the analog monitor to setup IP address.
Chapter 5-2-1. Setup IP Address
After entering PIH-036/038IP menu system, analog monitor displays:
MODEL
NETWORK SETUP
IR CUT SETUP
RESET DEFAULT
EXIT
To setup IP address, press SET button at NETWORK SETUP menu item.
MAC ADDRESS
IP ADDRESS
PORT
SUBNET MASK
GATEWAY
To setup IP address, HTTP port number, subnet mask, and gateway.
Use the following buttons:
1. SELECT button move cursor.
2. SET button enter submenu or set a digit.
3. MENU button finish setup and return to main menu.
After finish IP address, subnet mask, and gateway, set the mode switch to Live monitoring
mode. Press RESET button for rebooting.
9
Chapter 5-3. Configure IP Address Using HTML Page
To change IP address using HTML page, please first type the default IP address, 192.168.0.100
in Internet browser and follow steps below:
1. Logon PIH-036/038IP using default username and password "admin" and "pass".
2. Click on "Configure" hyper link.
3. Click on Network General hyper link.
4. Type or modify edit box for IP address, subnet mask, gateway, or HTTP connection port.
5. Click on Submit button.
Chapter 5-4. Internet Browser Setting & Software Component Required
Make sure that your Internet Browser allows signed ActiveX plug-in running on your PC. Set
"Download Signed ActiveX plug-in controls" to "Prompt" and "Run ActiveX control and plug-in"
to "Enable" at Internet Explorer Tools Options Security Settings.
After finishing above security settings, accrssing PIH-036/038IP's live video by default IP
address of PIH-036/038IP using Internet Explorer will prompt a Security Warning dialog box.
Click on OK Button to download the ActiveX directly from PIH-036/038IP.
10
Chapter 5-5. Advance Network Port Forwarding Technology
Port forwarding technology is an advanced network technology which is wildly used for using
one global IP shared by many network devices. The network architecture is illustrated as below.
Port 80 of the router (61.220.86.166) is assigned to the device IP address, 192.168.0.10. Port
81 of the router is assigned to the device IP address, 192.168.0.11. When Remote PC accesses
the router's port 81 (61.220.86.166:81), it eventually accesses the video server at 192.168.0.11.
Http://61.220.86.166:81
IP : 192.168.0.11 IP : 192.168.0.10
Internet
Router's global IP : 61.220.86.166
Port 80 192.168.0.10
Port 81 192.168.0.11
Chapter 5-6. Advance Network DDNS and PPPoE Technologies
The advantage of using DDNS and PPPoE is to save the expense of IP address.
PIH-036/038IP's PPPoE service gets a dynamic global IP address after system reboot. This IP
address may get changed periodically. This is the address needed to access the video server
over Internet.
When ISP re-assigns a new IP address to PIH-036/038IP, PIH-036/038IP notifies DDNS service.
A remote PC can access PIH-036/038IP by typing domain name in a browser. The domain name
gets resolved by DDNS service and gets translated to its dynamic global IP address. The
dynamic global IP address can now be accessed by the remote PC.
Remote PC
Internet
1. Get IP address from ISP after reboot.
3. Notify DDNS server for the new IP address if
PIH-036/038IP gets reboot or assigned a new IP
address.
DDNS Server ISP
2. ISP assigns global IP
to PIH-036/038IP
4. Access PIH-036/038IP
using the dynamic global.
5. Resolve domain name to IP address
and sent back to remote PC.
11
Chapter 5-7. Reset Default
To reset manufacturing default, please first follow:
1. Connect PIH-036/038IP's analog output to a monitor.
2. Set the mode switch (IP setup mode) to SETUP.
3. Press MENU button.
4. Press RESET button.
5. Release RESET button.
6. Release MENU button entering the menu system.
Select Reset Default menu item and press Set button. In the prompt menu, select Yes option to
reset manufacturing default.
Note : In case of forgetting password, Reset Default feature can restore the manufacturing
default password.
Chapter 5-8. IR-CUT Activation
To activate IR-CUT feature using pushbutton key, please follow the steps below:
1. Connect PIH-036/038IP's analog output to a monitor.
2. Set the mode switch (IP setup mode) to SETUP.
3. Press MENU button.
4. Press RESET button.
5. Release RESET button.
6. Release MENU button entering the menu system.
7. Press SET button and choose IR CUT SETUP.
8. Press SET again to choose one of the following items.
a. AUTO Auto switch.
b. IN IR-CUT off.
c. OUT IR-CUT on.
d. SCHEDULE Schedule activation.
9. When choosing SCHEULE mode, please define day and night activation time.
DAY TO NIGHT Day to night activation time.
NIGHT TO DAY Night to day activation time.
12
Chapter 6. Live Monitoring
Chapter 6-1. Login
There are two levels of user authentication including administrator and guest for accessing
PIH-036/038IP. The only difference is that administrator can configure system settings.
Guest can only view live video.
The default settings of username and password are described as follows:
Username
Password
Administrator Guest
admin guest
pass guest
To logon PIH-036/038IP, please type username and password in logon HTML page and click on
Submit button to enter the system.
Chapter 6-2. Menu Systems
To use PIH-036/038IP's menu systems, please right click on video box (ActiveX control). A menu
with three menu items gets pop up. A user can adjust video property, perform video record, and
zoom the video source via the menu systems.
13
Chapter 6-2-1. Video Property
A user can change a video property at local PC. To change a video property, please click on
Video Property menu item. There are six properties that a user can change. Changing video
properties does not change server's settings. In stead, the changes only affect the video
ActiveX control of the user's PC.
Chapter 6-2-2. Recording
To record PC AVI file, please click on Recording menu item. An AVI Capturing dialog box
shows up. A user can specify the AVI recording path in the Save As edit box. Click on Start
button. Live video can be captured and saved into local PC. Click on Stop button to stop the
recording operation.
Chapter 6-2-3. Zoom
To zoom the video ActiveX control, please select Zoom menu item. Please perform mouse-
dragging operation. The mouse-dragging area gets zoomed. To disable, please right click on
the video ActiveX control and select on Zoom menu item again to restore original view area.
14
Chapter 7. Start Using PIH-036/038IP Network Features
After login PIH-036/038IP as administrator, there are two main features system operation and
configuration. Operation and configuration features are described as follows:
Chapter 7-1. PIH-036/038IP Operational HTML Page
PIH-036/038IP operational HTML page layout contains:
Video size
Base on different network bandwidth, a user can change the transmitted video size from small
(QCIF) to large (VGA).
Configure hyper link
Configuration HTML page.
Editable device name
Device Name field is for users to identify device's name via web interface and IPScan utility.
Extra text stamp
VideoActiveX Control
VideoActiveX control is a software component displaying video streaming embedded inside an
HTML page.
Timer
PIH-036/038IP's timer system.
Frame statistics
Frame size and frame rate.
Online status
Number of person is currently accessing PIH-036/038IP.
15
Note : PIH-036/038IP's video ActiveX has digital authentication code signed.
PIH-036/038IP's video ActiveX can be automatically downloaded to a user's PC
when the user logon to PIH-036/038IP for first time. Internet Browser should be
configured to allow ActiveX plug-In run on the user's PC.
Chapter 7-2. PIH-036/038IP Configuration
PIH-036/038IP's administrator can configure PIH-036/038IP via standard HTML web page.
There are basically five system categories including server, network, motion, audio, and video
settings. This chapter explains the detail of each system setting.
Chapter 7-2-1. Server Settings
Server settings contain PIH-036/038IP server's system information such as MAC address,
firmware version, users, system timer, and other system settings. To change or to use the
information, please follow the instructions at this section.
Chapter 7-2-2. General Network Settings
Firmware Version
Device Name
Language
Firmware update allows a user to upgrade PIH-036/038IP's firmware remotely. A user can
use firmware version to verify that if the device has the latest update.
The device name can be used by IPScan utility to identify the PIH-036/038IP To change
the device name, enter the name for PIH-036/038IP and click on Submit button.
Language setting can be changed dynamically.
Chapter 7-2-3. User Settings
To change account name, please type new account name in Account edit box. To change new
password, please type the new password in the New Password edit box. Click on Submit
button to update the user settings.
16
Chapter 7-2-4. Timer
PIH-036/038IP allows a user to change system timer via standard HTML web page.
To change PIH-036/038IP's system timer, please enter the date and time in the edit boxes.
Click on Submit button to apply this operation.
Network Time Protocol
To synchronize time, check Auto Synchronize option to Every Hour. PIH-036/038IP
synchronizes its system timer with a time server every hour.
Note : Network Time Protocol feature requires Internet connection.
Chapter 7-2-5. System Setting
Load Default feature allow to load manufacturing default. There are certain critical settings
such as IP addresses and video system which do not be affected by this feature. To reboot
PIH-036/038IP click on Reboot System hyper link.
17
To update firmware of PIH-036/038IP, please click on Firmware Update hyper link. Locate
"flash036.bin" in your computer by click Browse button. Click Submit to finish firmware
upgrade. To ensure the quality of transmission, please make sure that there is no user
accessing PIH-036/038IP during firmware upgrade.
Firewall Setup can enable the Denial of Service to block ICMP Ping attacks from Internet
(DoS).
Chapter 7-3. Network
PIH-036/038IP provides many Internet protocols such as IP, DHCP, PPPoE, and DDNS. A user
can configure these Internet protocol settings. To setup above, please read the following sections.
Chapter 7-3-1. General Settings
Network general settings are the basic settings connecting PIH-036/038IP to the network.
The default IP Address of PIH-036/038IP is 192.168.0.100. A user can use this IP address to
verify the network connection between a local PC and PIH-036/038IP using Internet Browser.
For Internet access configuration, please contact your local ISP for global IP address. Once
the physical Internet connection gets installed, enter IP address (global), Subnet Mask, and
Gateway IP from the ISP.
18
1. DNS1 IP Address
First Domain Name Server, the IP address of the domain name server.
2. DNS2 IP Address
Second Domain Name Server, the IP address of the domain name server, a backup DNS
server for DNS1.
3. HTTP Connection Port
Advanced networking setting, in general, this network option allows multiple devices share
one IP address. Port forwarding, network address translation (NAT), and other network
technologies can utilize this option. Please refer a router's instruction manual or consult
network administrator for detail.
Chapter 7-3-2. DHCP Setting
Router, gateway, or other software DHCP servers can dynamically assign an IP address to
PIH-036/038IP. There is no need to configure IP address, subnet mask, and gateway. Since
the DHCP may assign a different IP address to PIH-036/038IP after power off, a user can use
IPScan utility to launch Internet browser for searching PIH-036/038IP. To enable DHCP, click
on DHCP option and click on Submit button.
Note : Once the DHCP option gets enable, PIH-036/038IP uses IP address from DHCP
server instead of the IP address assigned by IP Settings. This feature allows only
in LAN.
Chapter 7-3-3. PPPoE Settings
Point-to-Point Protocol over Ethernet (PPPoE) is an Internet protocol that is capable of
receiving dynamic global (static) IP address from an ISP. This protocol allows to switch to
another global IP address to maintain the Internet connection due to expiration of an global
IP address based on ISP's IP distribution's policy.
Primary purpose of adopting PPPoE can avoid the fee of leasing global IP address. Please
consult your local ISP for this service. To use PPPoE, please provide account and password
information for the service.
Chapter 7-3-4. DDNS Settings
DNS stands for domain name server, which provides domain name translation service for a
device's IP. Basically, domain name is easier to remember than numeric values (IP). DNS
service requires service registration and subscription. DynDNS (DDNS) provides domain
name service without subscription. Please logon www.dyndns.org and register for the service.
To use DDNS, please enter DDNS server, account ID, and password to logon to the server.
Click on Submit button to perform the task. The DDNS message box shows the connection
status sent by DynDNS server, after PIH-036/038IP establishes network connection with
DDNS Server.
19
Note : DDNS feature requires Internet connection.
Chapter 7-4. Alarm Settings
PIH-036/038IP's hardware alarm system contains motion/alarm detection notification features.
Many alarm features such as motion email notification and FTP archiving can be found at this
section.
Chapter 7-4-1. Motion Setup
There are two independent detection zone allowed in PIH-036/038IP. A user can enable the
detection zones with different sensitivities ranging from 0 to 15 (highest to lowest) for motion
detection. Once a suspicious motion activity gets triggered, PIH-036/038IP can start to
capture one JPEG snapshot on various recording medimums.
20
Chapter 7-4-2. Motion Area
Once above information gets set, please configure the motion area of the monitored
environment. To configure motion area, right mouse click on the video area for menu system.
Please selection detection area in menu item. Perform mouse-drag on the video to define the
motion area.
Motion Counter
Motion detection can be applies to many applications, for examples, counting people
entering a department store or counting vehicles driving through a high way. User can
unilize this page for motion statistics. To reset the counter, click on Reset Counter button.
To get the statistics, click on Refresh Counter.
Motion options are described as follows:
Motion Detection Enable Enable motion detection zone.
Sensitivity 0 to 15 (highest to lowest).
Shutter Time Motion detection interval.
Motion Email Notification For sending an email notification, please specify the
following network information. The snapshot gets sent as in the email attachment.
Mail Server IP/Host Name IP address or host name of the destination email server.
Mail Sender The sender's email address.
Mail Recipient The recipient's email address.
Motion FTP For sending snapshots to FTP server, please specify the following network
information. Motion snapshots can be transferred to the FTP server.
FTP Server IP/Host Name The destination IP address/host name of the FTP server.
Login Account Account name of the FTP server.
Login Password Account password of the FTP server.
21
Chapter 7-5. Video Settings
Chapter 7-5-1. Text Stamp
Specific overlay text information can be displayed on video ActiveX. To show the overlay
text information on the ActiveX, please enter text on Display Text field. The position is
adjustable by given x and y. Click Submit button to update above settings.
Chapter 7-5-2. Video
There are three video quality levels that a user can set for PIH-036/038IP. Basically, better
video quality setting a user can get better video image. However, if the bandwidth is a
concern, please lower the video quality setting.
Chapter 7-5-3. IR Cut Removable
IR Cut removable allows to schedule IR activation by (1) auto, (2) in, (3) out, or (4) schedule.
When the setting is set to "Auto", IR activation is determined by the light sensor. "In" setting
means that the IR cut feature is removed. "Out" setting means that the IR cut feature is forced
to be always on. When activation schedule is enabled, IR cut feature can be scheduled based
on a specific time frame. For example, a user can set the IR cut activation time starting from
19:00 pm (day to night time) until 6:00 am (night day time).
22
Chapter 8. Specifications
Chapter 8-1. Camera
Model No.
Lens
Power Input Voltage
System
Sync. Mode
Pick Up Element
Effective Pixels
Chip Size
Horizontal & Vertical
Sync. Frequency
Scanning System
Minimum Illumination
S/N Ratio
Auto Gain Control
Aperture Correction
Power Consumption
Back Light Compensation
Operating Temperature
Gamma Characteristic
IP Rating
Window
Infrared
LED
Beam Spread
Peak Wavelength
Radiant Distance
Dimension
Weight
Focal Length
Iris
Angle of view
H
V
D
PIH-0364XW IP
3.3 ~ 12mm 9 ~ 22mm 9 ~ 22mm3.3 ~ 12mm
F1.4
NTSC or PAL
AC24V ( 10%)
Internal
1/3" Exview HAD CCD Sensor
510(H) x 492(V) [NTSC]
500(H) x 582(V) [PAL]
6.00mm(H) x 4.96mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 Interlace
Color: 0.02Lux at F1.4,
Mono: 0.005Lux at F1.4
0Lux with IR
More Then 50dB (AGC-OFF)
36dB Variable Gain
Horizontal, Vertical
17W
Auto
IP66
78 Heat Resistant Glass
850nm
30
50M 60M 50M 60M
-10 ~ +50
(14 ~ 122 )
Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L)
2200g
=0.45
89.8 ~ 23.9
89.8 ~ 23.932.1 ~ 13.1 32.1 ~ 13.1
63.6 ~ 17.9 63.6 ~ 17.923.3 ~ 9.8 23.3 ~ 9.8
125.7 ~ 29.9 125.7 ~ 29.941.9 ~ 16.3 41.9 ~ 16.3
PIH-0364XS IP PIH-0368XW IP PIH-0368XS IP
Design and specifications are subject to change without notice.
STANDARD RESOLUTION D/N VARI-FOCAL IP IR CAMERA
AC90~260V
23
Model No.
Lens
Power Input Voltage
System
Sync. Mode
Pick Up Element
Effective Pixels
Chip Size
Horizontal & Vertical
Sync. Frequency
Scanning System
Minimum Illumination
S/N Ratio
Auto Gain Control
Aperture Correction
Power Consumption
Back Light Compensation
Operating Temperature
Gamma Characteristic
IP Rating
Infrared
LED
Beam Spread
Peak Wavelength
Radiant Distance
Dimension
Weight
Focal Length
Iris
Angle of view
H
V
D
PIH-0384XW IP
9 ~ 22mm 9 ~ 22mm
NTSC or PAL
AC24V ( 10%)
Internal
1/3" Super HAD CCD Sensor
768(H) x 494(V) [NTSC]
752(H) x 582(V) [PAL]
5.59mm(H) x 4.68mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 Interlace
Color: 0.05Lux at F1.4,
Mono: 0.01Lux at F1.4
0Lux with IR
More Then 50dB (AGC-OFF)
36dB Variable Gain
Horizontal, Vertical
17W
Auto
IP66
850nm
30
50M 60M 50M 60M
-10 ~ +50
(14 ~ 122 )
Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L)
2200g
=0.45
PIH-0384XS IP PIH-0388XW IP PIH-0388XS IP
Design and specifications are subject to change without notice.
HIGH RESOLUTION D/N VARI-FOCAL IP IR CAMERA
AC90~260V
Window
78 Heat Resistant Glass
3.3 ~ 12mm 3.3 ~ 12mm
F1.4
89.8 ~ 23.9
89.8 ~ 23.932.1 ~ 13.1 32.1 ~ 13.1
63.6 ~ 17.9 63.6 ~ 17.923.3 ~ 9.8 23.3 ~ 9.8
125.7 ~ 29.9 125.7 ~ 29.941.9 ~ 16.3 41.9 ~ 16.3
24
Model No.
Lens
Power Input Voltage
System
Sync. Mode
Pick Up Element
Effective Pixels
Chip Size
Horizontal & Vertical
Sync. Frequency
Scanning System
Minimum Illumination
S/N Ratio
Auto Gain Control
Aperture Correction
Power Consumption
Back Light Compensation
Operating Temperature
Gamma Characteristic
IP Rating
Infrared
LED
Beam Spread
Peak Wavelength
Radiant Distance
Dimension
Weight
Focal Length
Iris
Angle of view
H
V
D
PIH-0364XW IPH
9 ~ 22mm 9 ~ 22mm
NTSC or PAL
AC24V ( 10%)
Internal
1/3" Exview HAD CCD Sensor
510(H) x 492(V) [NTSC]
500(H) x 582(V) [PAL]
6.00mm(H) x 4.96mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 Interlace
Color: 0.02Lux at F1.4,
Mono: 0.005Lux at F1.4
0Lux with IR
More Then 50dB (AGC-OFF)
36dB Variable Gain
Horizontal, Vertical
26W
Auto
IP66
850nm
30
50M 60M 50M 60M
-10 ~ +50
(14 ~ 122 )
Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L)
2200g
=0.45
PIH-0364XS IPH PIH-0368XW IPH PIH-0368XS IPH
Design and specifications are subject to change without notice.
STANDARD RESOLUTION D/N VARI-FOCAL IP IR CAMERA
AC90~260V
Window
Heater Control
78 Heat Resistant Glass
On: 15 (59 ), Off: 25 (77 )
3.3 ~ 12mm 3.3 ~ 12mm
F1.4
89.8 ~ 23.9
89.8 ~ 23.932.1 ~ 13.1 32.1 ~ 13.1
63.6 ~ 17.9 63.6 ~ 17.923.3 ~ 9.8 23.3 ~ 9.8
125.7 ~ 29.9 125.7 ~ 29.941.9 ~ 16.3 41.9 ~ 16.3
Model No.
Lens
Power Input Voltage
System
Sync. Mode
Pick Up Element
Effective Pixels
Chip Size
Horizontal & Vertical
Sync. Frequency
Scanning System
Minimum Illumination
S/N Ratio
Auto Gain Control
Aperture Correction
Power Consumption
Back Light Compensation
Operating Temperature
Gamma Characteristic
IP Rating
Infrared
LED
Beam Spread
Peak Wavelength
Radiant Distance
Dimension
Weight
Focal Length
Iris
Angle of view
H
V
D
PIH-0384XW IPH
9 ~ 22mm 9 ~ 22mm
NTSC or PAL
AC24V ( 10%)
Internal
1/3" Super HAD CCD Sensor
5.59mm(H) x 4.68mm(V)
15.734 KHz / 59.94Hz [NTSC]
15.625 KHz / 50Hz [PAL]
2:1 Interlace
Color: 0.05Lux at F1.4,
Mono: 0.01Lux at F1.4
0Lux with IR
More Then 50dB (AGC-OFF)
36dB Variable Gain
Horizontal, Vertical
26W
Auto
IP66
850nm
30
50M 60M 50M 60M
-10 ~ +50
(14 ~ 122 )
Body:120mm(W) x 112mm(H) x 387mm(D), Bracket: 211.5mm(L)
2200g
=0.45
PIH-0384XS IPH PIH-0388XW IPH PIH-0388XS IPH
Design and specifications are subject to change without notice.
HIGH RESOLUTION D/N VARI-FOCAL IP IR CAMERA
AC90~260V
Window
78 Heat Resistant Glass
25
768(H) x 494(V) [NTSC]
752(H) x 582(V) [PAL]
Heater Control On: 15 (59 ), Off: 25 (77 )
3.3 ~ 12mm 3.3 ~ 12mm
F1.4
89.8 ~ 23.9
89.8 ~ 23.932.1 ~ 13.1 32.1 ~ 13.1
63.6 ~ 17.9 63.6 ~ 17.923.3 ~ 9.8 23.3 ~ 9.8
125.7 ~ 29.9 125.7 ~ 29.941.9 ~ 16.3 41.9 ~ 16.3
Chapter 8-2. IP System
Up to 30 fps for QCIF, 15 fps for CIF, 10 fps for VGA
Hardware
Image compression
Video adjustment
Video quality
Resolution
Network throughput
Motion detection
Motion notification
Protocols
IP Setup
Software Upgrade
Security
Recording
AVI File Exporting
Frame Statistics
User Logon Statistics
Built-in Language
IR Cut Removal
3G Mobile Phone
SDK
OS Supported
Browsers Supported
Complimentary Software
CPU 16 Bits CPU
Memory 1M Bytes Flash ROM
8M Bytes SDRAM
One RJ-45 To Internet
One BNC Video Output, CVBS 1.0Vp-p, 75ohm
JPEG / Motion JPEG
Three video quality adjustable
VGA 640*480 CIF(default) 320*240 QCIF 160*120
Two motion detection zones
Via FTP or Email
TCP/IP , ICMP , HTTP
ARP , DHCP , DNS , DDNS , SMTP , FTP , PPPoE , NTP
web page, IPScan software, and built-in pushbutton key control
HTML direct update
Two-layer password protection: Admin and Guest
PC AVI recording
ActiveX converts JPEG to AVI
Frame rate and frame size
Ye s
English & Chinese
Auto, In, Out, and Schedule
Java phone with MIDP 2.0 support
Yes (included in product CD)
Windows 2000 , Windows XP
Windows Internet Explorer 5.x or later
IPScan utility (included in product CD),
ActiveX (automatic downloaded),
NVR Software 2.0 (included in product CD)
Brightness, Contrast, Hue, Saturation, Rotation, AWB
Basic
Advanced
66-038CSE-2
26
Design and specifications are subject to change without notice.
MERIT LILIN ENT. CO., LTD
http://www.meritlilin.com 66-038CSE
Loading...