Lilin CMD072, CMD076, CMD072X, CMD076X, CMD172X Instruction Manual

INSTRUCTION MANUAL

CMD072/076/172/176 Series

WDR ULTRAHIGH RES. COLOR DOME CAMERA

CMD072X/076X/172X/176X Series

D/N WDR ULTRAHIGH RES. VARI-FOCAL DOME CAMERA

IMPORTANT SAFEGUARDS

GRAPHIC SYMBOL EXPLANATION

The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric

The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature

shock to persons.

accompanying the unit.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIESACCORDING

TO THE INSTRUCTIONS

CAUTION

Do not drop or strike this equipment.

Do not install the equipment near any naked flames or heat
sources.

Do not expose this unit to rain or excessive moisture, avoid
smoke and dust.

Do not cover cloth or to install this unit in poorly ventilated
places.

Do not continue to operate if there appears to be fault.

Do not touch the power connection with wet hands.

Do not damage the power cord or leave it under pressure.

Sensitive electronics inside are vulnerable to excessive shock.

Excessive heat could damage this unit.

Please the camera in an environmental housing for protection.
If the camera gets wet, unplug it and have it checked by
qualified service personnel.

This may lead to overheating.

If the unit ceases to function, contact qualified service
personnel for help.

Risk of short circuit or electric shock.

Risk of fire or shock circuit.

CONGRATULATIONS

Thank you for purchasing this Day/Night WDR Camera. You now
own one of the many fine CCTV products we manufactured. This
product has been carefully inspected under rigid quality control
and should reach you in perfect condition. With reasonable care,
it will provide years of reliable performance.

We recommend that you read this installation and operation
manual thoroughly before installing and operation your new
system.

Here you will find all the information you need to set up and use
the system. If any questions are not answered in the manual,
please contact your dealer.
Before proceeding, please read and observe all instructions and
warnings contained in this manual. Retain this manual with the
original bill of sale for future reference and, if necessary, warranty
service.

When unpacking your new camera, check for missing or damaged
items. If any item is missing, or if damage is evident,
I . Contact your dealer for
assistance.

DO NOT

NSTALL OR OPERATE THIS PRODUCT

WARRANTY INFORMATION

Please complete the following product purchase information. The
factory will requests this information when contacted for technical
support, or warranty repair. It is also valuable in case of loss or
theft.

Purchase Date
Serial Number
Model Number

TABLE OF CONTENTS

FEATURES
PART DESCRIPTION & DIMENSION
INSTALLATION
CONFIGURATION OF THE MENU
SETTING MENU AND FUNCTIONS

CAMERA ID
EXPOSURE
WDR/BLC
BRIGHTNESS
AGC (Automatic Gain Control)
SHUTTER (Shutter Speed)
SENS-UP
WHITE BAL (White Balance)
DAY/NIGHT
3D-DNR (Digital Noise Reduction)
PRIVACY
SPECIAL
D-ZOOM (Digital Zoom)
D-EFFECT (Digital Effect)
SHARPNESS
STABILIZER
COLOR
SYNC (Synchronization)
USER TITLE
LANGUAGE
RESET

SPECIFICATIONS

1
3
5

8
10
10

11
11

11
12
12
13
13
15
15
16
17
17
18
18
18
19
19
20
20
21
22

By adopting a diagonal 6mm(1/3") 410,000(NTSC) pixel, 470,000(PAL) pixel
CCD, the camera produces clear picture quality with a horizontal resolution of
600TV lines for color.

For images with high contrast between bright and dark areas from difficult
lighting conditions such as backlighting, this camera selectively illuminates
darker areas while decreasing the light level for brighter areas to even out the
overall brightness.

The high-performance DSP chip effectively removes low-light gain noise and
afterimage to provide clear images even in dark environments.

Equipped with a maximum X256 sens-up capacity and low luminance levels
of 0.0002Lux(F1.2), the camera achieves excellent performance in processing
images especially in very low light conditions.

The camera automatically identifies when it is either day or night time and
switched accordingly. During daylight the camera will switch to color to obtain
excellent image clarity, while at night the camera will switch to monochrome to
obtain improved picture definition.

The EIS function compensates for any camera movement, to produce more
stable pictures.

FEATURES

ULTRAHIGH RESOLUTION

WIDE DYNAMIC RANGE(WDR)

3D DIGITAL NOISE REDUCTION

SENS-UP(X256) / LOW LUMINANCE LIGHT

DAY&NIGHT(IR CUT REMOVABLE)

ELECTRONIC IMAGE STABILIZER(EIS)

1

2

The HSBLC function that effectively blocks strong light sources such as
headlights. It provides optimum performance in recognizing vehicular license
plates and objects at night.

This camera provides an on screen display(OSD) setup menu where all
advanced functions can be selected and setup via OSD.

Privacy zones prevent objects and areas such as windows and doors which
are within the camera's viewing range but not in the scope of surveillance,
8 masking areas per screen simultaneously.

Built-in continuous digital zooming control, X1 to X10.

Color-temperature is adjusted automatically to produce clean, natural and rich
color images. ATW, AWC, INDOOR and OUTDOOR modes are available to
obtain most suitable selection.

HIGHLIGHT SUPPRESS BACK LIGHT COMPENSATION(HSBLC)

ON SCREEN DISPLAY CONTROL(OSD)

PRIVACY ZONE

DIGITAL ZOOM

WHITE BALANCE

PART DESCRIPTION & DIMENSION

3

VIDEO OUTPUT JACK
DC POWER INPUT (DC12V 10%) JACK
DC12V (NON-POLARITY INPUT) OR AC24V POWER INPUT
BASE
FIX RING
INSIDE COVER
DOME COVER
LENS

Unit : mm

120

102

98

55

[CMD072/076 Series]

4

VIDEO OUTPUT JACK
DC POWER INPUT (DC12V 10%) JACK
DC12V (NON-POLARITY INPUT) OR AC24V POWER INPUT
BASE
FIX RING
INSIDE COVER
DOME COVER
LENS

120

102

98

55

Unit : mm

[CMD172/176 Series]

5

INSTALLATION

1. Put the provided screws (M3.0 x 25, wooden screw) through the holes marked
as "a", and fix the base in the desired area (FIG.1).

a

a

a

FIG. 1

2. The direction of the lens is adjustable through the adjustable Pan/Tilt brackets
and rotatable round bracket for Azimuth. The lens can be adjusted easily by
hand without using screw driver. Please refer to FIG.2 (Color Dome Camera)

and FIG.3 (Vari-Focal Dome Camera).

BRACKET

PAN

AZIMUTH

TILT

FIG. 2

(CMD072/076/172/176)

40mm

120

OSC SETTING

SET

RL

U

D

6

PAN

AZIMUTH

TILT

FIG. 3

(CMD072X/076X/172X/176X)

OSD SETTING

BRACKET
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT

SET

RL

U

D

A. (UP): Push up to move the cursor upwards or to select items.
B. (LEFT): Push left to move the cursor to the left and to select or adjust

the parameters of the selected item. The parameters changes
each time this button is pushed.

C. (RIGHT): Push right to move the cursor to the right and to select or

adjust the parameters of the selected item. The parameters

changes each time this button is pushed.
D. (DOWN): Push down to move the cursor downwards or to select items.
E. SET: Press to executes selections and displays a submenu for an item

with the mark.

OSD SETTING

3. An extra RCA jack for easy installation. Plug the video input of monitor to
the RCA jack and adjust focus and zoom.

After finished, unplug the RCA jack. Please refer to FIG.4.

7

4. Put on the inside cover first, and followed by put on the dome cover.
Then tighten the fix ring(FIG.5).

bb

cc

FIG. 5

FIG. 4

NOTE Point each "b"

to each "c".

CAMERA
SETTING

CAMERA ID

EXPOSURE

3D-DNR

WHITE BAL

DAY/NIGHT

8

CONFIGURATION OF THE MENU

OFF/1~255

PUSH

ALC

OFF/LOW/MIDDLE/HIGH

ATW

DAY

COLOR TEMP

ELC

AWC

NIGHT
AUTO

RED(-100~100)

MANUAL

BLUE(-100~100)

WDR/BLC

BRIGHTNESS(0~100)
AGC
SHUTTER

SENS-UP

OFF/A.FLK/(1/160~1/90000)/(X512~X2)/AUTO

OFF

OFF

WDR

AUTO

BLC
HSBLC

WDR LIMIT(1~7)

SENS-UP LIMIT(X2~X256)

BLC LIMIT(1~7)

AREA SETTING
GRAY SCALE

GRAY/D.GRAY/BLACK
USER SCALE(0~5)

MASK

OFF/ON

OFF/LOW/MIDDLE/HIGH

INDOOR/OUTDOOR

PRIVACY

OFF
ON

MASK NUMBER
DISPLAY
COLOR
HEIGHT(4~100)
WIDTH(4~100)
MOVE Y(20~80)
MOVE X(20~80)

AREA 1/2/3/4/5/6/7/8
OFF/ON
GRAY/WHITE/BLACK

RESET

EXIT

SPECIAL

D-ZOOM

CAMERA REBOOT

OFF

OFF

INT

D-EFFECT

FACTORY RESET
COMMUNICATION

SHARPNESS(0~68)
STABILIZER
COLOR
SYNC

USER TITLE

LANGUAGE

ON

ON

LL

9

ZOOM(X1.1~X10)
PAN(-100~100)
TILT(-100~100)

OFF/V-FLIP/MIRROR/ROTATE

OFF/ON

OFF/ON

PHASE(0~359)

ENG

: Not used in the CMD072/076/172/176 Series.

SETTING MENU AND FUNCTIONS

To Open and Exit the Menu screen

1. Press "SET" button.
The Menu screen appears on the monitor. Check the current settings on the
menu.

2. Push or button to select the [EXIT] then push or button to select
a mode.

RET: Return to the previous.
TOP: Return to the CAMERA SETTING menu screen.
END: Exit the setup menu.

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

CAMERA ID

You can use the camera identification(CAMERA ID) to assign a number to the
camera.

1. Select [CAMERA ID] option on the [CAMERA SETTING] menu.

2. Push or button to select a CAMERA ID(OFF, 1~255).

The setup menu will be disappear after save the current setting value.

NOTE

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

10

EXPOSURE

You can set the exposure options using the EXPOSURE menu.
Select [EXPOSURE] option on the [CAMERA SETTING] menu. Press "SET"
button and the EXPOSURE menu appears.

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

EXPOSURE-ALC

WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT

OFF

MIDDLE
AUTO
OFF
RET

50

WDR/BLC

Use WDR/BLC option to set the options for WDR or BLC camera.

1. Select [WDR/BLC] option.

2. Push or button to select a mode then press "SET".

WDR: Set the WDR LIMIT(1~7).
BLC: Set the BLC LIMIT(1~7).
HSBLC: Use for adjusting brightness the specific area of picture.

AREA SETTING: Push or button to select a area then push or

button to select a ON or OFF. Press "SET" button to exit the AREA

SETTING menu.

GRAY SCALE: Push or button to select a gray scale.

USER SCALE: Push or button to select a bright level(0~5).
MASK: Push or button to select a ON or OFF.

GRAY D.GRAY BLACK

BRIGHTNESS

You can set the brightness level.

1. Select [BRIGHTNESS] option.

2. Push or button to set the bright level(0~100).

11

EXPOSURE-ALC

WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT

OFF

MIDDLE
AUTO
OFF
RET

50

AGC (Automatic Gain Control)

If the image are too dark, change the maximum [AGC] value to make the images
lighter.

1. Select [AGC] option.

2. Push or button to select a mode.

OFF LOW MIDDLE HIGH

EXPOSURE-ALC

WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT

OFF

MIDDLE
AUTO
OFF
RET

50

SHUTTER (Shutter Speed)

1. Select [SHUTTER] option.

2. Push or button to set shutter speed.

A. FLK: Anti-Flicker

OFF A.FLK(1/100 or 1/120) 1/160~90000 X512~X2 AUTO

12

13

SENS-UP

If pictures are not clear due to darkness, use for increase the sensitivity of
picture.

1. Push or button to select [SENS-UP] option.

2. Push t a [AUTO].
To setting the [AUTO] function, select the [AUTO] on the [SHUTTER].

3. Press "SET" button and push or button to set SENS-UP LIMIT
(X2~X256).

or button to selec

If you set the AGC to [OFF] or the SHUTTER is set to one of the SHUTTER options
except AUTO on the [SHUTTER] menu, the [SENS-UP] setting is not available and
[---] mark is displayed.

NOTE

EXPOSURE-ALC

WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT

OFF

MIDDLE
AUTO
OFF
RET

50

EXPOSURE-ALC

WDR/BLC
BRIGHTNESS
AGC
SHUTTER
SENS-UP
EXIT

OFF

MIDDLE
AUTO
OFF
RET

50

WHITE BAL (White Balance)

You can select one of three modes for white balance adjustment.

1. Select [WHITE BAL] option on the [CAMERA SETTING] menu.

2. Push or button to select one of three modes for white balance then
press "SET".

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

ATW AWC MANUAL

ATW (Auto Tracing White Balance):
The color temperature range for the proper white balance is approximately

1,700K~11,000K. Proper white balance may not be obtained under the
following conditions:

A. The color temperature is out of the 1,700K~11,000K range.

B. When the scene contains mostly high color temperature objects, such

as a blue sky or sunset.

C. When the scene is dim.

AWC PUSH : If you select the [AWC PUSH ] mode, you will be able

to setup the White Balance automatically using "SET" button.

MANUAL: You can set the white balance options manually.

COLOR TEMP: Push or button to select a function.
(INDOOR: 3,200K, OUTDOOR: 5,100K)
RED: Obtains the optimum amount of red gain.
BLUE: Obtains the optimum amount of blue gain.

14

WB MANUAL SETUP

COLOR TEMP
RED
BLUE
EXIT

INDOOR

RET

0
0

DAY/NIGHT

1. Select [DAY/NIGHT] option on the [CAMERA SETTING] menu.

2. Push or button to select mode for day/night function.

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

DAY NIGHT AUTO

DAY: Color mode enabled.

: Monochrome mode enabled.

: You will be able to change the Day/Night mode automatically

according to the brightness of a light sources.

NIGHT

AUTO

15

3D-DNR (Digital Noise Reduction)

1. Select [3D-DNR] option on the [CAMERA SETTING] menu.
If pictures are not clear due to brightness, use for reduce the noise of picture.

2. Push or button to select a option.

OFF LOW MIDDLE HIGH

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

1. If you set the AGC to [OFF] on the [EXPOSURE-ALC] menu or the [EXPOSURE­ELC] menu, the [3D-DNR] function is not available and [---] mark is displayed.

2. When you use this function, the afterimage may occur.

NOTES

PRIVACY

This function is aiming at the protection of personal privacy, selecting a screen
part black not to be displayed in the screen.
You may setup the size and location of the area.

1. Select [PRIVACY] option on the [CAMERA SETTING] menu.

2. Push or button to select a [ON] and press "SET" button. The PRIVACY
SETUP menu appears.

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

PRIVACYSETUP

MASK NUMBER
DISPLAY
COLOR
HEIGHT
WIDTH
MOVE Y
MOVE X
EXIT

AREA1
OFF
GARY

RET

40
40
50
50

3. Push or button to select a mask(AREA1~ARE8) on the [MASK
NUMBER].

4. Push or button to setup the ON or OFF on the DISPLAY option.

5. Push or button to setup the GRAY, WHITE or BLACK on the COLOR
option.

6. Push or button to select an option then push or button to adjust
the option.

HEIGHT: Enlarge or decrease the vertical size of the mask.
WIDTH: Enlarge or decrease the horizontal size of the mask.
MOVE Y: Moves horizontal position of the mask.
MOVE X: Moves vertical position of the mask.

16

SPECIAL

This menu lets you adjust and setup D-ZOOM, D-EFFECT, SHARPNESS,
COLOR, SYNC, USER TITLE, LANGUAGE function by yourself in the SPECIAL
menu.

1. Select [SPECIAL] option on the [CAMERA SETTING] menu.

2. Press "SET" button and the SPECIAL menu appears.

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

D-ZOOM (Digital Zoom)

You can select the Digital Zoom magnification.

1. Select [D-ZOOM] option on the [SPECIAL] menu.

2. Push or button to select a [ON] then press "SET" button. The DIGITAL
ZOOM menu appears.

DIGITALZOOM

ZOOM
PAN
TILT
EXIT

RET

0
0

X1.1

3. Push or button to select a option then push or button to select a
level.

ZOOM: Push or button to enlarge or decrease the image.
PAN: Push or button to move the image(left or right).
TILT: Push or button to move the image(up or down).

17

D-EFFECT (Digital Effect)

You can select the digital effect.

1. Select [D-EFFECT] option on the [SPECIAL] menu.

2. or button to select a digital effect.Push

OFF V-FLIP MIRROR ROTATE

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

V-FLIP: Flip the picture vertically.
MIRROR: Turn on the mirror effect.
ROTATE: Rotate the pictures(180 ).

SHARPNESS

You can select the sharpness effect.

1. Select [SHARPNESS] option on the [SPECIAL] menu.

2. Push or button to change a adjust the option.

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

18

STABILIZER

You can select the electronic image stabilizer effect.

1. Select [STABILIZER] option on the [SPECIAL] menu.

2. Push or button to change a stabilizer effect.

OFF: Turn off the electronic image stabilizer effect.
ON: Turn on the electronic image stabilizer effect.

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

COLOR

You can select the color effect.

1. Select [COLOR] option on the [SPECIAL] menu.

2. Push or button to change a color effect.

OFF: Monochrome(Black&White) screen.

ON: Color screen.

19

SYNC (Synchronization)

Select [SYNC] option on the [SPECIAL] menu.
The SYNC menu is fixed to the INT mode.

INT: Internal synchronization.

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

USER TITLE

You can use the camera identification to assign a number and character to the
camera(0~9, A~Z, a~z).
The USER TITLE is displayed on the center screen. To disappear the user title,
select [OFF].

1. Select [USER TITLE] option on the [SPECIAL] menu.

2. Push or button to select a [ON] then press "SET" button. The USER
TITLE menu appears.

20

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

USER TITLE

1

CLR POS END

3.Push,,orbutton to select a character or number.

(Blank): Inserts a space at the cursor position.

: Moves cursor to left or right.
CLR: If you enter the wrong code, select CLR then press "SET" button.
POS:Push,,orbutton to move position of USER TITLE on
the screen.
END: Confirm your selection.

1

LANGUAGE

Select a language(only English) for the setup menu and on-screen display.

SPECIAL

D-ZOOM
D-EFFECT
SHARPNESS
STABILIZER
COLOR
SYNC
USER TITLE
LANGUAGE
EXIT

OFF
OFF

OFF
ON
INT
OFF
ENG
RET

34

21

RESET

1. Select [RESET] option on the [CAMERA SETTING] menu.

2. Press "SET" button and the RESET menu appears.

3. Push or button to select option.

CAMERA SETTING

CAMERA ID
EXPOSURE
WHITE BAL
DAY/NIGHT
3D-DNR
PRIVACY
SPECIAL
RESET
EXIT

OFF
ALC
ATW
AUTO
MIDDLE
OFF

CAMERA REBOOT: To reboot the camera system.
FACTORY RESET: To reset the camera setting to factory setting, select
[FACTORY RESET] option.
COMMUNICATION: Not used.

22

SPECIFICATIONS

Lens

System

Model No.

Pick Up Element

Effective Pixels

Digital Pan/Tilt

Chip Size
Horizontal & Vertical
Sync. Frequency

Scanning System
Menu Control
Sync. Mode
Resolution
Min. Illumination
S/N Ratio
Auto Gain Control
White Balance
Exposure
Electrical Shutter
Slow Shutter
Sense-Up
WDR
Wide Dynamic Range
Back Light Compensation
Highlight Suppress BLC
3D Digital Noise Reduction
Digital Zoom

Sharpness
Digital Effect
Privacy Masking
Privacy Masking Zone
Electronic Image Stabilizer
Video Output

Power Input Voltage

Focal Length
Iris

AngleofView

H
V
D

3.6mm 6.0mm
F2.0

NTSC or PAL

1/3" Vertical Double-Density Interline CCD Sensor

768(H) x 494(V) [NTSC]

752(H) x 582(V) [PAL]

Horizontal / Vertical Direction Can be Operated

(According to the Zoom Magnification)

6.00mm(H) x 5.00mm(V)

15.734KHz / 59.94Hz [NTSC]

15.625KHz / 50Hz [PAL]

2:1 Interlace
OSD Control

Internal

600 TV Lines

0.0006 Lux / F1.8 (Sense-Up Auto)
More than 50dB (AGC-OFF)

Low/Middle/High/Off

ATW / AWC / Manual (Indoor/Outdoor)

ALC / ELC

1/60(1/50)S ~ 1/90,000S

2~16Fld / 24Fld / 32Fld / 64Fld / 128Fld / 256Fld / 512Fld

Auto (X256Max.) / Off

Adjustable

4000 : 1

Adjustable

Yes

Low/Middle/High/Off

On (X10Max.) / Off

Adjustable

V-Flip / Mirror / Rotate / Off

On/Off
8 Zones
On/Off

CVBS1.0Vp-p, 75Ohm

DC12V 10%

CMD072 3.6
CMD172 3.6

73

44.5

54.5 33.1
92 56

DC12V 10%
AC24V 10%

WDR ULTRAHIGH RESOLUTION COLOR DOME CAMERA

F1.8

DC12V 10%

CMD072 6
CMD172 6

DC12V 10%
AC24V 10%

CMD076 3.6
CMD176 3.6

CMD072 6
CMD172 6

Gamma Characteristic

=0.45

3.0W (DC12V)

2.5W (AC24V)

3.0W (DC12V)

2.5W (AC24V)

Design and specification are subject to change without notice.

Power Consumption

Operating Temperature
Dimension
Weight

-10 ~ +50 (14 ~ 122 )
120 x 102mm

2.2W

290g

2.2W

290g310g 310g

23

66-CMD072CSE-2

Lens

System

Model No.

Pick Up Element

Effective Pixels

Digital Pan/Tilt

Chip Size
Horizontal & Vertical
Sync. Frequency

Scanning System
Menu Control
Sync. Mode
IR Cut Filter
Resolution

Min. Illumination

S/N Ratio
Auto Gain Control
White Balance
Exposure
Electrical Shutter
Slow Shutter
Sense-Up
WDR
Wide Dynamic Range
Back Light Compensation
Highlight Suppress BLC
3D Digital Noise Reduction
Digital Zoom

Sharpness
Digital Effect
Privacy Masking
Privacy Masking Zone
Electronic Image Stabilizer
Video Output

Power Input Voltage

Focal Length
Iris

AngleofView

H
V
D

2.8~12mm
F1.2

NTSC or PAL

1/3" Vertical Double-Density Interline CCD Sensor

768(H) x 494(V) [NTSC]

752(H) x 582(V) [PAL]

Horizontal / Vertical Direction Can be Operated

(According to the Zoom Magnification)

6.00mm(H) x 5.00mm(V)

15.734KHz / 59.94Hz [NTSC]

15.625KHz / 50Hz [PAL]

2:1 Interlace
OSD Control

Internal

Auto / Day / Night
Color: 600TV Lines , Mono: 700TV Lines
Color: 0.0002Lux / F1.2 (Sense-Up Auto)
Mono: 0.0001Lux / F1.2 (Sense-Up Auto)

More than 50dB (AGC-OFF)

Low/Middle/High/Off

ATW / AWC / Manual (Indoor/Outdoor)

ALC / ELC

1/60(1/50)S ~ 1/90,000S

2~16Fld / 24Fld / 32Fld / 64Fld / 128Fld / 256Fld / 512Fld

Auto (X256Max.) / Off

Adjustable

4000 : 1

Adjustable

Yes

Low/Middle/High/Off

On (X10Max.) / Off

Adjustable

V-Flip / Mirror / Rotate / Off

On/Off
8 Zones
On/Off

CVBS1.0Vp-p, 75Ohm

DC12V 10%

CMD072X4.2
CMD172X4.2

99.6 ~ 24.9

73.2 ~ 18.8

128.5 ~ 31.0

DC12V 10%
AC24V 10%

D/N WDR ULTRAHIGH RESOLUTION VARI-FOCAL DOME CAMERA

CMD076X4.2
CMD176X4.2

Gamma Characteristic

=0.45

3.0W (DC12V)

2.5W (AC24V)

Design and specification are subject to change without notice.

Power Consumption

Operating Temperature
Dimension
Weight

-10 ~ +50 (14 ~ 122 )
120 x 102mm

2.8W

310g 330g

MERIT LILIN ENT. CO., LTD

http://www.meritlilin.com

CMD072/076/172/176 Series

66-CMD072CSE

WDR ULTRAHIGH RES. COLOR DOME CAMERA

CMD072X/076X/172X/176X Series

D/N WDR ULTRAHIGH RES. VARI-FOCAL DOME CAMERA