LIKUID L07, L19, L61, L37, L91 User Manual

MANUAL

HOUSINGS

Likuid L07-L19-L37-L61-L91

Fecha | Date:

09/09/2013

Código Doc. | Document N:

M-Housings-R04

MANUAL

HOUSINGS

Likuid L07-L19-L37-L61-L91

MANUAL

M-Housings -R04

Page 3 of 8

1. INTRODUCTION

This user manual describes the technical characteristics and the instructions for operation, maintenance, assembling and
disassembling of Likuid housings. With the aim of guaranteeing an optimum performance, it is strongly recommended to follow
scrupulously the following indications.

The design of the housings has been validated under the corresponding quality control protocols, so that the optimum performance
is guaranteed in accordance to technical specifications.

When the product is received and/or unpacked:

• Ask for assistance of qualified technicians for ensuring that the installation is made correctly.

• Please inform Likuid immediately of any external damage or defect in the packing or in the product itself.

• Follow scrupulously the drawings supplied for housings assembling/disassembling.

2. TECHNICAL SPECIFICATIONS

The main characteristics of Likuid’s housings are the following:

Material

Stainless steel

(diverse range)

Morph

ology

Tubular

Range of pH resistance

0-14

Maximum pressure

1

10 bar

Range of temperature

1 5-95ºC

Fluid2

Group

2

Standard models

L7, L19, L37, L61, L9

1

1

According to 97/23/CE Directive, in applicable technical requirements of Article 3-Section 3

2

For fluids from the Group II, according to 97/23/CE Directive, in applicable technical requirements of Article 3-Section 3

L07 L19 L37 L61 L91

A

1195mm 1195mm 1195mm 1195mm 1195mm

B

880mm 880mm 880mm 880mm 880mm

C

DN100 DN150 DN200 DN300 DN350

D

Ø53mm Ø77mm Ø96mm Ø110mm Ø128mm

Q

7 membranes 19 membranes 37 membranes 61 membranes 91 membranes

M

23kg 46kg 73kg 138kg 186kg