LightwaveRF JSJS LW106 Operation Manual

6 Button Remote

Operation Manual

Model No: JSJS LW106

OVERVIEW:

connect

IMPORTANT: PLEASE RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE AND FOR GUIDANCE ON
THE ASSOCIATION OF REMOTE HANDSETS. FOR
HELP AND SETUP GUIDANCE PLEASE VISIT
www.lightwaverf.com

It is important to install this product in accordance
with the tting instructions below. Failure to do so
may render your guarantee void.

OnO

SETUP:

The functions illustrated here relate to the operation
of ON/OFF receivers such as Single and Double
Sockets and the Plug-in Adapter Sockets, and to
dimmable receivers; for information regarding how
to pair the handset to the relevant receiver(s), please
refer to the setup instructions for that individual
device.

Before operation, ensure that the plastic lm
isolating the battery is removed (see later battery
replacement diagram for guidance on how to access
battery).

NOTE: If the RF range between the transmitter and
receiver is too great to achieve reliable operation,
the LightwaveRF Connect SIGNAL BOOSTER may be
used in conjunction with this product to increase the
signal strength over greater distances.

OPERATION :

‘ON’ Button - Press once to switch paired devices ‘ON’.

Hold to raise dim level.

‘OFF’ Button - Press once to switch paired devices ‘OFF’.
Hold to lower the dim level.

Changing the Remote Battery

1. Pull out the battery holder.

2. Remove old battery and replace with a fresh one.

3. Replace battery holder into transmitter

NOTE:

• Connect correctly and securely

• Do not recharge

• Keep away from children

• Do not swallow (If swallowed, seek medical advice

immediately)

• Please dispose of used batteries responsibly

Birmingham Science Park Aston

Faraday Wharf

Holt Street

Birmingham

B7 4BB

Tel: [phone]

Email: [e-mail]

SPECIFICATION

RF frequency: 433.92 MHz
I