Operation, installation and service instructions
IP20
Lucid nova pro | LED luminaire
Please read these instructions before installing the luminaires,
using them for the rst time, storage or handling.
LIGHTS 4 Europe GmbH & Co. KG
Gaildorfer Straße 6
71522 Backnang, Germany
Phone: +49 7191 32 30 20
Fax: +49 7191 32 30 19
Mail: info@lights.de
These installation and service instructions,
edition 09.03.2018 apply to the Lucid nova pro
Managing director:
Marcus Püttmer
Michael Schläger
Complementary:
LIGHTS Optomechanical GmbH
Amtsgericht Stuttgart
HRA-Nr.: 723 999
VAT ID No.: DE 264 379 235
EORI-Nr. DE 729 37 12
WEEE-Reg.-Nr.: DE 532 792 42
Deutsche Bank
IBAN DE69 600 700 240 196 498 000
BIC DEUTDEDBSTG
www.lights.de
Introduction
Dear customer,
Many thanks for buying this product from us and for the trust you have placed in us.
Please read these operating, installation and service instructions carefully before using the product.
These instructions are aimed at suitable qualied persons (e.g. electricians, installers or engineers) tasked with
installation and maintenance of this product. It applies for all versions of the Lucid nova pro LED luminaires. LED
luminaire in the Lucid nova pro range are intended for professional use indoors.
Technical personnel must be familiar with all technical electrical directives and safety precautions, and apply these
appropriately in each case.
These instructions are not suitable or intended for users and consumers without specialist technical knowledge.
For questions concerning handling the luminaire, which are not answered in these instructions, please contact:
LIGHTS 4 Europe GmbH & Co. KG
Gaildorfer Str. 6
71522 Backnang
Germany
Telefon +49 7191 323020
Telefax +49 7191 323029
Email: info@lights.de
We wish your every success with our product and hope you enjoy saving energy
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
2
Product description & applications
The LED luminaire in the Lucid nova pro range come complete with an integrated power supply / driver for operating
the luminaire.
The Lucid nova pro is suitable for professional use in industrial, production and warehouse buildings and for working areas.
The Lucid nova pro is subject to quality checks in accordance with European standards. The luminaire stand out
not only because of their modern design, but above all because of a number of special technical features, which
guarantee the best possible technical performance. These include highly ecient lens optics, high-quality housing
materials, constant current control, temperature monitoring, as well as lifelong regulation of luminous ux. The
working temperature of -30 to 40 °C facilitates a wide range of applications.
Labels
To help precise identication of the product, you will nd information about the model and item number on the type
plate. We recommend you make a note of this information so it is available if you have any questions later. This will
help us handle your query more quickly.
Symbols
IP20
By using the CE mark, the manufacturer conrms that the product conforms to the
applicable, product specic European directives.
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
The IP protection classication system categories the level of protection which a
housing for electrical devices oers against solids (e.g. dust) and liquids (water, oil
etc.). IP 20 means 2 = Protection against the ingress of solid foreign bodies above
a diameter of 12.5 mm; 0 = not protected against water.
None of the components in this product exceeds the permissible thresholds for use
of hazardous materials in accordance with the RoHS directive 2011/65/EU
All electrically conductive housing components in the equipment are connected to
the protective conductor system of the xed electrical installation, which is at earth
potential.
An electrical product marked with this symbol may not be disposed of in domestic
waste.
3
Installation - general safety instructions
CAUTION - DANGER OF ELECTROCUTION
Only appropriate technical personnel may work on electrical systems. There is a risk of fatal electrocution. Before
working on electrical systems and switching units, they should be removed from the power supply and secured
against accidental re-connection. Before touching conductive components and cables, use appropriate equipment
to conrm they are actually isolated from the power supply.
• First read the operating instructions through completely, as they contain important information for correct
tting and operation.
• Any damage caused by non-compliance with these operating instructions invalidates the warranty/guarantee!
We do not accept any liability for direct or consequential damages!
• We do not accept any liability for personal or property damage caused by improper use or non-compliance
with the safety instructions! In these cases, the warranty/guarantee is invalidated!
• The product may not be opened (please also read the instructions in the chapter MAINTENANCE).
• The light source in these luminaires is not replaceable. When the light source has reached the end of its life,
the whole light must be replaced
• Do not install the product on a damp or conductive surface.
• To avoid any hazard, a damaged outer exible lead on this light may only be replaced by the manufacturer,
their representative or a comparable qualied person.
• Only install the product in switched-o mode.
• Only install the product in intended electrical systems and voltage ranges. Check and compare the informa-
tion on this on the product’s type plate.
• If a fault occurs, disconnect the product from the mains power supply and any other connected devices. Then
ensure neither can be switched on again accidentally.
• If you cannot guarantee that the product can be operated without any danger, disconnect the product imme-
diately from the mains power supply and any other connected devices. Once more, ensure neither can be
switched on again accidentally. It is not possible to guarantee that the product can be operated without any
danger when, for example, the housing or power cable is damaged, or if any foreign objects have penetrated
it.
• Use suitable, approved power cables and cable connectors / clips of an adequate size. Make sure the cables
sit rmly in the connectors. Any loose or exposed cables represent an extremely high risk of electric shock
and re.
• When working under roofs, on masts or any other high tting sites, ensure you are on a solid base by using approved, certied ladders, or risers, as well as fall protection for personnel, tools and the product to be
installed. Cordon o the area under the installation area adequately.
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
• Caution: Please consult specialists before using the luminaires in high ambient temperatures or chemically
polluted environments.
4
Fitting
Before beginning the assembly the supply line must be cut o from the power supply!
- Do not connect or disconnect when live!
- Installation only by a qualied electrician!
Product prole
Power
Box
Light
module
Installation steps
EPE
The carton contains EPE for protection of the product,
as well as the luminaire and an anti-glare ring.
Tool
Screwdriver
luminaire
Accessories (b)
plastic srew
M5
anti-glare ring
Accessories (a)
Suspension for
luminiare
anti-glare
ring
Slide the anti-glare ring down and make sure that
it is secured safely.
Hook
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
Tighten the srew in the srew hole shown in picture.
Hang the luminaire with hanging hook.
5
Maintenance, care and cleaning
This product requires no maintenance and so does not contain any components, which can be checked or replaced
by the user. The light source in the luminaires cannot be replaced. In the event of damage, the complete light unit
must be replaced. The product is tted with appropriate safety precautions, which show unauthorised opening
(safety screws). In the event of unauthorised opening of the device or removal of the type plate, any guarantee
rights will be invalidated.
We recommend carrying out regular checks of the screws and the cabling, as well as a visual inspection of the
housing and the diuser for penetration by foreign bodies or supercial damage. During maintenance, the product
should be disconnected from the power supply and steps take to ensure it cannot be switched on again accidentally.
We recommend cleaning with a damp, soft, lint-free cloth. Do not use abrasive sponges or aggressive cleaners.
During cleaning, the product should be disconnected from the power supply and steps take to ensure it cannot be
switched on again accidentally.
Please note the general safety instructions in the chapter INSTALLATION.
Recycling
The Lucid nova pro has been developed and manufactured using high-quality materials and components. The
symbol means that this product falls under the European directive 2002/96/EG gilt. Please familiarise yourself with the relevant directives relating to the separate collection of old electric and electronic equipment in your
country. Please observe the applicable regulations in your country, and do not dispose of disused equipment in
domestic waste. Proper disposal of your old devices protects the environment and people from potential negative
consequences and contributes towards conserving valuable resources.
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
6
Technical data
Item No. Beam Angle Diusor
Colour
Temperature
Lucid nova pro | Standard version
30871 120° clear daylight white 5,000 K 10,100 lm / 112 W
Additional Versions (longer delivery times, higher minimum orders)
30870 120° clear cold white 6,500 K 10,100 lm / 112 W
30872 120° clear normal white 4,000 K 10,100 lm / 112 W
30873 120° clear warm white 3,000 K 9,000 lm / 112 W
Product-Specications
General Information
Product family: Lucid nova pro
Protection class: I
Schutzart: IP 20
Use/
ambient temperature: -30 °C to +40 °C
Heat sink: Powder-coated in silver grey,
Stainless steel screws
Certication: CE
LED Life time prediction: > 60.000 h
Dimensions
CCT (K)
Luminous Flux /
Power
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
Photometric properties
Optics: 120° wide beam
Colour Rendering Index: Ra > 80
Luminous ecacy: up to 90 lm/W
Electrical specications
Power: 112 W
Mains voltage: 100 - 240 V ~
Frequency: 50/60 Hz
Driver eciency: 94% e.
Marerial
Housing: Powder-coated aluminium
Optics: clear
Dimensions: ø 290 x 310 mm
Net weight: approx. 6,000 g
Special requirements
Caution: Please consult specialists before using the luminaires in high ambient
temperatures or chemically polluted environments.
7
Guarantee period
1. The guarantee period is 2 years, where an extension to the guarantee was not agreed for an extra fee at the
time of purchase. This starts when the product is delivered to the end user. Any claims under guarantee must
be made in writing.
2. To validate a guarantee claim, the receipt must be presented, on which the delivery or purchase data is clearly visible. In the event of a claim under guarantee, the device should be sent to your specialist retailer or to
the following address:
LIGHTS 4 Europe GmbH & Co. KG (in the following „LIGHTS“)
Gaildorfer Str. 6
D-71522 Backnang
Email: info@lights.de
All design, material and manufacturing faults are covered by the guarantee.
3. The guarantee excludes any faults or deciencies relating to the following points:
a. Failure to follow the operating and safety instructions.
b. Natural wear and tear.
c. External factors such as transport damage or damage caused by impact, shock or over heating, as well as
chemical or electro-chemical factors such as those caused by water, acids or improper use.
d. Repairs or alterations carried our by non-authorised third parties.
e. Use of unsuitable accessories.
f. Unauthorised opening of the housing
g. Removal of the type plate
4. The following are also excluded: Damage caused by improper handling, tting or maintenance of the luminaires (see tting instructions), damage caused by excessive force, re, vandalism or accidental damage.
5. LIGHTS will resolve any faults within the guarantee period in consultation with the specialist retailer. This
will take the form either of a repair of replacement of the component in question. Parts removed become the
property of LIGHTS. Any further claims, of any kind, in particular claims for damages are excluded.
6. The following are excluded from the guarantee:
a. Costs for removal / tting of the faulty or repaired luminaires
b. Costs for sending back the faulty luminaires
LED luminaire from LIGHTS are subject to ongoing development with regard to technical progress. For this reason, in the event of a repair or a replacement, the design of the repaired or replaced luminaires may not correspond to the original design of the luminaire subject to the claim, but it may be of equal or higher quality in terms
of its properties and features. LIGHTS reserves the right to change guarantee periods, xed price arrangements
and conditions without prior notice. However, guarantees with a valid registration before the time of the change
remain unaected by this. LIGHTS reserves the right to make the nal decision with regard to the validity of a
guarantee claim.
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
8
Legal notices
These operating instructions contain the information required for appropriate use.
Knowledge and observance contained in these operating instructions are a condition of safe use and for safety in
operation. These operating instructions cannot consider every possible application. The LED luminaire is intended
for use indoors.
In addition, we would like to point out that the contents of these operating instructions are not part of, or represent a
change to, a prior or existing agreement, consent or legal relationship. The operating instructions contain information, which is copyright protected. Production of photocopies, or translations into another language, are not allowed
without prior written permission from LIGHTS 4 Europe GmbH & Co. KG - Germany.
LED-Luminaire and light sources from LIGHTS 4 Europe GmbH & Co. KG are subject to ongoing development with
regard to technical progress.
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
9
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
LIGHTS 4 Europe GmbH & Co. KG
Gaildorfer Straße 6
71522 Backnang
Germany
IG_Lucid _nova_pro_EN_09.03.2018_V2.0 - Similar to illustrations, technical data are subject to change
Tel.: +49 7191 32 30 20
Fax: +49 7191 32 30 19
E-Mail: info@lights.de
www.lights.de
Loading...