Lightronics TL4008 Data Sheet

Lighting Control Consoles

• 16 Channels

TL4008

Lighting Control Console

• 8 Scenes

• 2 Programmable Chases

• LMX-128 Protocol

• Optional DMX-512

• Optional Wireless DMX (stand alone)

The TL4008 lighting control console is suitable for church, stage, theater, disco, night club, live performances and other event
and artistic applications.

Features of the TL4008 include: grand master fader, split dipless crossfader, momentary “bump” buttons, and blackout control.
Two 40 step chases may be run simultaneously for complex patterns. Chase rate is set by tapping the rate button at the desired
rate. Scenes and chases stored in the unit are not lost when the unit is turned off.

SPECIFICATIONS

Channels: 16 or 8

Chase: 12 Programmable, 40 Steps
each, Steps will Store Scenes

Operating Modes: 8 Channels x 2 Scenes
16 Channels x 1 Scene
8 Channels + 8 Preset Scenes

Memory: Non Volatile - Scenes and Chases
Retained when Unit Powered Off

Scenes: 8 Scenes
16 Channels each

Control Protocol: LMX-128 (3 pin multiplex)
DMX-512 Optional

Power Requirements:
Phantom Power: 18VAC or +15VDC, 400ma
External Power: 13 - 25VAC or VDC, 400ma

Size: 10.25”W x 9.25”D x 2.5”H

Weight: 4.3 Pounds

Architect & Engineer’s Specications

The lighting control console shall have one manual 16 channel scene; two manual 8 channel scenes; or one 8 channel manual
scene plus 8 preset programmable scenes, the operation is selected by a Y MODE switch. A crossfader control enables full fade
versatility between scenes. The console stores 8 scenes. Momentary (bump) buttons enable instant channel turn on. Two 40
step chases are user programmable. There shall be an overall master fader, blackout function, and control of the chase rate.
The console shall have a nonvolatile memory to retain scenes and chases when powered off.

The console is supplied standard with LMX-128 (multiplex) control on a 3 wire cable. It can provide USITT DMX-512 as an
option. The power requirements for the console shall be in 3 wire multiplex mode: 18VAC or +15VDC, 400ma minimum; and/or
when DMX-512 is being used an external power supply is needed: 13 - 25VAC or VDC, 400ma minimum. Construction is of 16
gauge steel and no rivets are used in the construction. Nylon “break resistant” shafts are used on the fader controls.

The console is 10.25”W x 9.25”D x 2.5”H and is 4.3 pounds.

The lighting control console shall be a Lightronics TL4008.

To view and/or download the Owner’s Manual click here: www.lightronics.com/manuals/tl4008m.pdf

509 Central Dr STE 101, Virginia Beach, VA 23454 Tel: [phone]

Fax: [phone] Visit us online at www.lightronics.com (130327)