Lightronics TL2448 Specifications

Lighting Control Consoles

• LED Compatible

• Optional Built In Wireless DMX

Lighting Control Console

TL2448

• 48 Conventional Channels and 8 Moving Light
Sub Master Controller

• 1200 Scenes

• 36 Programmable Chases

• Cue Stack Stores 600 Scenes

• Built In Softpatch

• Full Go Button

• LMX-128 and DMX-512 Protocols

The TL2448 is a multi-application lighting control console. It is suitable for church, stage, theater, disco, night club, live
performances and other event and artistic applications.

The unit provides both LMX-128 (multiplex) and DMX- 512 output protocols simultaneously. This console will store 600
conventional scenes which can be cued with control of fade times. The cue list may hold up to 600 scenes. There are 2 patch
pages for reassigning output channels. Thirty six chase sequences may be created and stored by the operator. Each of these

may have 40 steps. Dedicated moving lights support is included for up to 8 moving light xtures with up to 12 channels per
xture. 600 additional scenes are available for moving light control.

SPECIFICATIONS

Channels: 48

Chase: 36 Programmable, 40 Steps
each Pattern, 0-100% Chase
Fade Rate Control

Output Protocol: LMX-128 (3 pin multiplex)
and DMX-512

Operating Modes: 2 Scene x 24 Channels
1 Scene x 48 Channels

Sub masters: 12 Dedicated x 50 Banks

Conventional Scenes: 600

Additional Controls: House Master, Grand Master,
Cue Master, Blackout Function,
Momentary Intensity

Power: 120VAC, 50/60Hz, 20 Watts
220VAC Optional

Cue List: 600 Cues with Fade Time Control

Softpatch: 2 Pages with Copy Control

Moving Light Scenes: 600

Size: 23”W x 18”D x 2.5”H

Weight: 19.7 Pounds

Architect & Engineer’s Specications

The lighting control console shall have one manual 48 channel scene; two manual 24 channel scenes; or 12 sub master

manuals times 50 equalling 600 conventional dimmer scenes and/or 600 intelligent xture steps. The operation is selected by

a MODE switch. Split crossfader control enables full manual fade between scenes. Momentary (bump) buttons enable instant
channel turn on in either a Pile On or Solo selectable mode. Thirty-six 40 step chases with chase channels, scenes or a
combination of both are user programmable. There shall be a fully functional Cue Stack function with up to 999 seconds. Cues
are activated via a “GO” button. The console has a Softpatch function. There shall be an overall master fader, blackout function,
house master and control of the chase rate. The console shall have a nonvolatile memory to retain scenes and chases when

powered off. There is provision to control up to 8 moving xtures with up to 12 parameters per xture.

The console is supplied standard with LMX-128 (multiplex) control on a 3 wire cable and USITT DMX-512. Power requirements
for the console are 120VAC, 20 Watts, 50/60Hz. Construction is of gauge steel and no rivets are used in the construction.

The console is 23”W x 18”D x 2.5”H and the weight is 19.7 pounds.

The lighting control console shall be a Lightronics TL2448.

To view and/or download the Owner’s Manual click here: www.lightronics.com/manuals/tl2448m.pdf

509 Central Dr STE 101, Virginia Beach, VA 23454 Tel: [phone]

Fax: [phone] Visit us online at www.lightronics.com (130327)