Page 1
PIN #
SIGNAL NAME
1
DMX COMMON
2
DMX DATA -
3
DMX DATA +
DANGER
RISK OF ELECTRIC SHOCK
Page 1 of 5
FXLE17C4N LE D FIX T UR E
Version 0.1 OWNERS MANUAL 6/9/2017
FEATURES AND SP ECIF I CATIONS
LED: 170 Watt 4in1 Quad-Color, RGBW, CREE array.
White Color Temp: Adjustable 3000k-7000k
Beam Angle: 19º or 26º or 36º
Control System: DMX512 + Stand Alone
DMX Channels: 9
DMX Connectors: 3 pin XLR
Power Input: 120VAC, 60Hz
Max. Power Consumption: 200 Watts
Body Material: High Impact Plastic
Body Color: Black or White
Reflector: Glass
Gel Frame and Size "B" Gobo Holder Included
Size: 26"L x 14"W x 18"H (with yoke)
Weight: 14.2 lbs
DESCRIPTION
The FXLE17C4N is a LED ellipsoidal fixture suitable
for stage, disco, night club, and other artistic
applications. It has automatic stand-alone control
modes and can operate via a DMX512 external signal.
A mounting yoke enables t he f ixture to be insta lled a nd
operated in various positions and orientations.
INSTALLATION
LOCATION
The FXLE17C4N is rated IP20 and is intended for
INDOOR USE ONLY.
Locate the unit in a well ventilated area away from
moisture or heat. Maintain a minim um spacing of 20"
between the unit and other objects. The maximum
ambient operating tem perature is 45ºC (113ºF). Kee p
the vent holes clear . Holes are pro vided on the yokes
to install a tradit ional lighting c-clamp for mounting on
batten pipe. Use a safety cable when hanging the
fixture.
POWER CONNECTIONS
DMX CONNECTIONS
A system using D MX contr ol sh ould be co nnect ed as a
chain of devices. In other words the control signal
cable should proceed from the controller to the first
receiving device and then to others in a continuous
"daisy chain" fashion.
The fixture has a DMX IN and a D MX OUT connector
to be used to connect the chain. The control cable
should NOT be split into a multiple run star
arrangement with a cable running from the controller
directly to each receiving device pack.
DMX CONNECTOR PIN ASSIGNMENTS
There are two different connectors generally used for
DMX control. They are both XLR type connectors.
Some units use 3 pin connectors. Others use 5 pin
connectors. FXLE17C4N onl y has 3 pin connections.
DMX is received on th e 3 pin MALE connector o n the
back of the unit. T he 3 pin FEMAL E connec tor is us ed
to connect to the next DMX device on the control
chain.
The table below sho ws the pin assignm ents for the 3
pin DMX cable.
The FXLE17C4N has a blue turn and lock connector
for power input. A compat ible power cable is provided
for connection to a 120 V AC, 15 Am p, 60Hz, ground ed
service. Push the blue co nnector on the c able straight
into the blue connector on the unit and twist approx.
1/8 turn clockwise to latch it.
www.lightronics.com
Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588
Page 2
CONTROL PANEL
Page 2 of 5
FXLE17C4N LE D FIX T UR E
Version 0.1 OWNERS MANUAL 6/9/2017
DMX TERMINA TION
It is recommended that a DMX data chain be
terminated at the last receiving device on the chain.
This is done by installing a commonly available 1/4
Watt, 120 Ohm res istor across the DATA - and DATA
+ wires at the last device. If you have only a few
fixtures installed very close together and with a short
run of DMX cable to the controller then you may be
able to operate without the terminator .
OPERATION
A power ON/OFF switch is located at the rear of the
unit. A display and user interface is located on the
back of the unit. This interface is used to set the
operating options and s ettings. It consists of an LED
display and four buttons (ESC, ENTER, DOWN, and
UP).
PERFORM MODE (Perform 00X)
The perform mode selects different preset colors and
intensities. DMX contro l c a n be res tor e d b y setti ng th i s
option to 000.
MASTER FUNCTION
The master function can be turned off or on. When on
units further down the DMX chain will respond the
same way as the Master unit as long as this setting is
off in the slave units.
AUDIO FUNCTION
The audio function will cycle through colors to sync
with the beat from any audio.
RESET FUNCTION
This function is not supported at this time.
Use UP and DOWN to scroll through the available
choices. Push ENTER when you reach the option you
want to check or set. T he c urrent s etting for t he op tion
will be shown. Use U P an d DOWN until you reac h the
desired setting or menu then push ENTER to invoke
the new setting. Use ESC to exit from the sub menus.
DMX OPERATION
Use the Address menu to set the unit DMX starting
address. The range is 001 - 511. Due to the unit
being a 9 channel fixture the unit will not function
properly if address is set above 502.
The fixture uses 9 DMX c hanne ls all ocate d per ta ble in
back of manual.
www.lightronics.com
Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588
Page 3
DANGER DO NOT OPEN UNIT
RISK OF ELECTRIC SHOCK
RISK OF FIRE
Page 3 of 5
FXLE17C4N LE D FIX T UR E
Version 0.1 OWNERS MANUAL 6/9/2017
MAINTENANCE AND REPAIR
TROUBLESHOOTING
Fixture will not power up.
• Check that you have power applied to the
unit and the power switch is on.
• Check the fuse located on the back panel of
the fixture.
Unable to control fixture.
• Check the DMX control cable for continuity
and polarity.
• Verify the fixture is properly addressed.
• Check the address settings or patch at the
controller.
CLEANING
DISCONNECT THE POWER CORD BEFORE
HANDLING THE UNIT.
A mild detergent can be u sed sparingly if needed. Do
not use chemicals or solvents when cleaning the
fixture. Ensure that the unit is dry before use.
REPAIR
The only FXLE17C4N user serviceable part is a 5 mm
x 20 mm externally accessible fuse on the rear panel.
DISCONNECT THE POWER CORD BEFORE
CHECKING OR REPLACING THE FUSE.
Replace fuse ONLY with 3.15 Amp, 250VAC, fast
acting fuse.
Internal service on the unit by other than Lightronics
authorized agents will void the war ranty.
If service is required, contact the dealer from whom
you purchased the item, or contact the Lightronics,
Service Department, 509 Central Drive, Virginia Beach,
VA 23454. Tel: 757 486 3588.
www.lightronics.com
Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588
Page 4
DMX Channel Assignments
DMX Channel
Function
1
Red Intensity (0-255)
2
Green Intensity (0-255)
3
Blue Intensity (0-255)
4
White Intensity (0-255)
Warmth Intensity
OFF is brightest light
6
Strobe adjustment
7
Master Intensity (0-255)
8
Auto Color Fade
9
Demo control
Page 4 of 5
FXLE17C4N LE D FIX T UR E
Version 0.1 OWNERS MANUAL 6/9/2017
5
(7000k-3000k)
www.lightronics.com
Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588
Page 5
Page 5 of 5
FXLE17C4N LE D FIX T UR E
Version 0.1 OWNERS MANUAL 6/9/2017
www.lightronics.com
Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 757 486 3588
Page 6
Lightronics Inc. 509 Central Drive, Virginia Beach, VA 23454 20100211
WARRANTY
This product is warranted for a period of TWO YEARS from the date of purchase against
defects in materials and workmanship.
This warranty is subject to the following restrictions and conditions:
A) If service is required, you may be asked to provide proof of purchase from an
authorized Lightronics dealer.
B) This warranty is valid only for the original purchaser of the unit.
C) This warranty does not apply to damage resulting from abuse, misuse, accidents,
shipping, and repairs or modifications by anyone other than an authorized
Lightronics service representative.
D) This warranty is void if the serial number is removed, altered or defaced.
E) This warranty does not cover loss or damage, direct or indirect arising from the use or
inability to use this product.
F) Lightronics reserves the right to make any changes, modifications, or updates as
deemed appropriate by Lightronics to products returned for service. Such changes
may be made without prior notification to the user and without incurring any
responsibility or liability for modifications or changes to equipment previously
supplied. Lightronics is not responsible for supplying new equipment in accordance
with any earlier specifications.
G) This warranty is the only warranty either expressed, implied, or statutory, upon which
the equipment is purchased. No representatives, dealers or any of their agents are
authorized to make any warranties, guarantees, or representations other than
expressly stated herein.
H) This warranty does not cover the cost of shipping products to or from Lightronics for
service.
I) Lightronics Inc. reserves the right to make changes as deemed necessary to this
warranty without prior notification.
Loading...