Page 1 of 6
FXLD68FP2I LED FIXTURE
Version 0.1 OWNERS MANUAL 06/20/2013
FEATURES AND SPECIFICATIONS
LEDS: 8, 6W each (Warm White, Cool White - 2 in 1)
Beam angle: 25 º
Control system: DMX-512 + Stand Alone Modes
DMX channels: 1/2/3/4/5
DMX connectors: 3 pin XLR
Voltage: 120 VAC 50/60Hz
Max power consumption: 60 Watts
Cooling: Internal Fan
Body material: Steel
Body color: Black
Size: 10.25"L x 3.5"W x 9.2"H (with bracket)
Weight: 6.6 lbs (3.0kg)
DESCRIPTION
The FXLD68FP2I is a warm white, cool white LED
lighting fixture. It is suitable for stage, disco, night
club, and other artistic applications. It has several
stand alone control modes and can operate via a DMX512 external signal. A yoke enables the fixture to be
operated in several positions.
INSTALLATION
LOCATION
The FXLD68FP2I is rated IP20 and is intended for
INDOOR USE ONLY.
Locate the unit in a well ventilated area away from
moisture and heat. Keep the vent holes clear. Holes
are provided on the yoke to install a lighting bar pipe
clamp. Use a safety cable when hanging the fixture.
POWER CONNECTIONS
RISK OF ELECTRIC SHOCK
CAUTION
The FXLD68FP2I has a blue powercon style connector
for power input. A compatible power cable is provided
for connection to a 120 VAC, 15 Amp, 60Hz,
grounded service. Push the blue connector on the
cable straight into the blue connector on the unit and
twist aprox. 1/8 turn clockwise to latch it.
The white powercon style connector on the unit is used
to pass power on to another unit. A mating white
connector is also provided.
Caution is advised since the line cord is rated for
aprox. 7 Amps maximum.
THE SAFETY GROUND TERMINAL ON THE POWER
CABLE MUST BE USED.
DMX CONNECTIONS
A system using DMX control should be connected as a
chain of devices. In other words the control signal
cable should proceed from the controller to the first
receiving device and then to others in a continuous
"daisy chain" fashion.
The fixture has a DMX IN and a DMX OUT connector
to be used to connect the chain. The control cable
should NOT be split into a multiple run star
arrangement with a cable running from the controller
directly to each receiving device pack.
DMX CONNECTOR PIN ASSIGNMENTS
There are two different connectors which can be used
for DMX control. They are both XLR type connectors.
Some units use 3 pin connectors. Others use 5 pin
connectors. The FXLD68FP2I receives a DMX signal
on the 3 pin MALE connector on one side of the unit.
The 3 pin FEMALE connector is used to connect the
next DMX device on the control chain.
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 2 of 6
FXLD68FP2I LED FIXTURE
Version 0.1 OWNERS MANUAL 06/20/2013
If your console uses a 5 pin connector you can make up
an adapter cable to accommodate this. The table below
shows the pin assignments for BOTH the 3 pin and 5
pin connectors.
DMX TERMINATION
PIN # SIGNAL NAME
1 DMX COMMON
2 DMX DATA 3 DMX DATA +
4 NOT USED
5 NOT USED
A DMX chain should be terminated at the last
receiving device on the chain. This is done by
installing a commonly available 1/4 Watt, 120 Ohm
resistor across the DATA - and DATA + wires at the
last device. If you have only a few fixtures very close
together and a very short run to the controller then you
may be able to operate without the terminator.
OPERATION
A control panel on one side of the unit is used to set the
operating options. It consists of an LED display and
four buttons
(MENU, UP, DOWN, and ENTER)
CONTROL PANEL
Push
UP
MENU UP DOWN ENTER
MENU
to access the operating options. Then use
and
DOWN
to scroll through the available choices.
When you reach the option you want to set or change push
ENTER
for the option and/or change it. Push
. Now you can view the current setting
ENTER
to save
your changes and activate the option. See the "MENU
NAVIGATION" diagram for additional details.
There are 7 operation modes: DMX, Warm White
Level, Cool White Level, Strobe, Fade, Auto
Sequence, and Auto Run.
DMX OPERATION
Use the Addr menu to set the starting address of the
unit. You can set the starting address of the unit with
the UP and DOWN buttons.
For DMX operation the FXLD68FP2I fixture can be
configured as a 1 channel, 2 channel, 3 channel, 4
channel, or 5 channel unit.
Set the CH - - menu to P001 (1 channel), A001(2
channel), F001(3 channel), D001(4 channel), or
H001(5 channel).
Detailed information on DMX channel operation is
given in the tables
MANUAL OPERATION
DMX VALUES AND FUNCTIONS
.
For manual operation the warm white and cool white te
LED intensity levels may be independently set. Use
the uL - -, EL - -, menus to set the levels. The range
is from 00 to 100. 00 is OFF.
STROBE MODE (
FLAS
)
The Strobe mode causes the unit to flash all led's. The
speed is user controllable by using the FLAS menu.
The speed range is 1 - 100. 100 is fastest.
AUTO FADE
(FAdE)
The Auto Fade mode cycles smoothly through a
sequence of seven colors. Use the FADE menu to set
the speed and activate the option. The range is from 0
to 100. 100 is fastest.
AUTO SEQUENCE (
ASC -
)
The AUTO SEQUENCE mode switches continuously
through a sequence of colors. Use the ASC - menu to
set the sequence speed. The range is from 1 to 100.
100 is fastest.
AUTO RUN (
Auto
)
The unit can operate using 100 preset programs.
Programs 0 thru 49 are a variety of colors and patterns.
Programs 50 thru 100 are similar but are sound synced
to music base notes.
Use the Auto menu to select and activate a program.
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 3 of 6
FXLD68FP2I LED FIXTURE
Version 0.1 OWNERS MANUAL 06/20/2013
MAINTENANCE AND REPAIR
TROUBLESHOOTING
CAUTION DO NOT OPEN UNIT
RISK OF ELECTRIC SHOCK
RISK OF FIRE
Check that you have power applied to the unit.
Check the DMX control cable.
Check the address settings of the unit and the
controller.
CLEANING
Do not use harsh chemicals or solvents when cleaning
the fixture. A mild detergent can be used sparingly if
needed. Ensure that the unit is completely dry before
re-use.
REPAIR
The fixture contains a 2 Amp, fast acting, 5mm x
20mm externally accessible fuse. Replace the fuse
ONLY with the same size and type.
The FXLD68FP2I does not contain any other user
serviceable parts. Internal service on the unit by other
than Lightronics authorized agents will void the
warranty.
If service is required, contact the dealer from whom
you purchased the item, or contact the Lightronics,
Service Department, 509 Central Drive, Virginia
Beach, VA 23454. Tel: 757 486 3588.
PHOTOMETRIC CHARACTERISTICS
Distance Illuminance Beam Diam.
(ft) (Lux) (ft)
10 265 4
20 73 6
30 40 8
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 4 of 6
FXLD68FP2I LED FIXTURE
Version 0.1 OWNERS MANUAL 06/20/2013
MENU NAVIGATION
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 5 of 6
FXLD68FP2I LED FIXTURE
Version 0.1 OWNERS MANUAL 06/20/2013
DMX VALUES AND FUNCTIONS
1 CHANNEL MODE (MODE P)
CHANNEL NO. FUNCTION
1 0 - 255 Master Dimmer
2 CHANNEL MODE (MODE A)
CHANNEL NO. FUNCTION
1 0 - 255 Warm White Level
2 0 - 255 Cool White Level
3 CHANNEL MODE (MODE F)
CHANNEL NO. FUNCTION
1 Master Dimmer
2 0 - 255 Warm White Level
3 0 - 255 Cool White Level
4 CHANNEL MODE (MODE D)
CHANNEL NO. FUNCTION
1 Master Dimmer
2 Strobe Control
3 0 - 255 Warm White Level
4 0 - 255 Cool White Level
5 CHANNEL MODE (MODE H)
CHANNEL NO. FUNCTION
1 Master Dimmer
2 Strobe Control
3 0 - 255 Warm White Level
4 0 - 255 Cool White Level
5
0 - 255 Color Temperature
www.lightronics.com
Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Y
This product is warranted for a period of TWO YEARS from the date of purchase against
defects in materials and workmanship.
This warranty is subject to the following restrictions and conditions:
A) If service is required, you may be asked to provide proof of purchase from an
authorized Lightronics dealer.
B) This warranty is valid only for the original purchaser of the unit.
C) This warranty does not apply to damage resulting from abuse, misuse, accidents,
shipping, and repairs or modifications by anyone other than an authorized
Lightronics service representative.
D) This warranty is void if the serial number is removed, altered or defaced.
E) This warranty does not cover loss or damage, direct or indirect arising from the use or
inability to use this product.
F) Lightronics reserves the right to make any changes, modifications, or updates as
deemed appropriate by Lightronics to products returned for service. Such changes
may be made without prior notification to the user and without incurring any
responsibility or liability for modifications or changes to equipment previously
supplied. Lightronics is not responsible for supplying new equipment in accordance
with any earlier specifications.
G) This warranty is the only warranty either expressed, implied, or statutory, upon which
the equipment is purchased. No representatives, dealers or any of their agents are
authorized to make any warranties, guarantees, or representations other than
expressly stated herein.
H) This warranty does not cover the cost of shipping products to or from Lightronics for
service.
I) Lightronics Inc. reserves the right to make changes as deemed necessary to this
warranty without prior notification.
WARRANT
Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 20100211
Loading...