Lightronics DI-104 Owner's Manual

Page 1
W
Page 1 of 4 DI-104 DMX OPTICAL ISOLATOR
Version 0.1 OWNERS MANUAL 05/26/2009
DESCRIPTION
The DI-104 is an optically isolated DMX splitter with one DMX input and four independent DMX output circuits.
The four DMX output circuits have 1/8 Amp fuses in each of the three DMX lines (Data-, Data+, and Common).
The DI-104 is powered by an external low voltage power supply which is provided with the unit.
PORTABLE UNIT FRONT AND BACK VIE
DI-104
POWER
DMX OUTPUT CONNECTIONS
There are two versions of the DI-104.
PORTABLE UNIT:
This version is supplied in a compact portable box with 5 pin XLR connectors for DMX IN (1) and DMX OUT (4). The units dimensions are 5.125"W X 1.75"H X
5.25"D.
WALL MOUNT UNIT:
The wall mount version is supplied in a metal box with appropriate mounting holes. Knockouts are provided for signal access. DMX IN and DMX OUT connections are via terminal strips with screw down terminals. The units dimensions are 10.25"W X 12"H X 4.25"D.
DMX
VALID
DMX IN
www.lightronics.com 20090526 drp Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 2
W
W
Page 2 of 4 DI-104 DMX OPTICAL ISOLATOR
Version 0.1 OWNERS MANUAL 05/26/2009
ALL MOUNT UNIT FACE VIEW (Cover Removed)
10.25"
KNOCKOUTS
IN TOP
MOUNTING
HOLES
(3 EACH SIDE)
12"
CIRCUIT
BOARD
KNOCKOUTS
IN BOTTOM
ALL MOUNT UNIT INTERNAL BOARD
External
Power In
Power
Indicator
DMX
VAL ID
Indicator
DATA + DATA ­COM DATA + DATA ­COM DATA + DATA ­COM DATA + DATA ­COM
DMX OUT
#1
DMX OUT
#2
DMX OUT
#3
DMX OUT
#4
COM
DATA -
DMX IN
DATA +
DMX OUTPUT
FUSES (12)
www.lightronics.com 20090526 drp Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 3
Page 3 of 4 DI-104 DMX OPTICAL ISOLATOR
Version 0.1 OWNERS MANUAL 05/26/2009
OPERATION
Diagrams showing signal and power connections for both the portable and wall mount units appear below and on the following page.
Operation is automatic when the power supply and a DMX input signal are connected. The front panel contains a power indicator LED which is lighted when power is applied. A "DMX VALID" LED indicator is lighted when a DMX input signal is present.
POWER SUPPLY
The DI-104 will operate using any external power supply which can provide 13 - 24 Volts AC or DC at 600 ma. The power supply provided with unit is 13VAC, 800 ma. The size of the power input connector on the unit is 2.1mm. If an external DC power supply is used, the center pin of the connector MUST be the NEGATIVE side of the supply.
MAINTENANCE
There are no user servicable parts in the unit. The 1/8 Amp fuses are axial lead fuses soldered directly to the internal circuit card. These fuses could be replaced by a qualified technician but the warranty could be voided if the circuit board is damaged during a repair by other than a Lightronics authorized agent.
Dealer and Lightronics Factory personnel can help you with operation or maintenance problems. Please read the applicable parts of this manual before calling for assistance.
If service is required - contact the dealer from whom you purchased the unit or contact Lightronics, Service Dept., 509 Central Drive, Virginia Beach, VA 23454 TEL: (757) 486-3588.
www.lightronics.com 20090526 drp Lightronics Inc. 509 Central Drive Virginia Beach, Va 234354 757 486 3588
Page 4
W
Y
ARRANT
All Lightronics products are warranted for a period of TWO/FIVE YEARS from the date of purchase against defects in materials and workmanship.
This warranty is subject to the following restrictions and conditions:
A) If service is required, you may be asked to provide proof of purchase from an authorized Lightronics dealer.
B) The FIVE YEAR WARRANTY is only valid if the warranty card is returned to Lightronics accompanied with a copy of the original receipt of purchase within 30 DAYS of the purchase date, if not then the TWO YEAR WARRANTY applies. Warranty is valid only for the original purchaser of the unit.
C) This warranty does not apply to damage resulting from abuse, misuse, accidents, shipping, and repairs or modifications by anyone other than an authorized Lightronics service representative.
D) This warranty is void if the serial number is removed, altered or defaced.
E) This warranty does not cover loss or damage, direct or indirect arising from the use or inability to use this product.
F) Lightronics reserves the right to make any changes, modifications, or updates as deemed appropriate by Lightronics to products returned for service. Such changes may be made without prior notification to the user and without incurring any responsibility or liability for modifications or changes to equipment previously supplied. Lightronics is not responsible for supplying new equipment in accordance with any earlier specifications.
G) This warranty is the only warranty either expressed, implied, or statutory, upon which the equipment is purchased. No representatives, dealers or any of their agents are authorized to make any warranties, guarantees, or representations other than expressly stated herein.
H) This warranty does not cover the cost of shipping products to or from Lightronics for service.
I) Lightronics Inc. reserves the right to make changes as deemed necessary to this warranty without prior notification.
Lightronics Inc. 509 Central Drive Virginia Beach, VA 23454 20050125
Loading...