Lightolier Uniframe Lytecaster 2001F Specification
Lytecaster
FOR O.A. HEIGHT SEE
TRIM SPECIFICATION
3 3/4" FRAME APERTURE
3 15/16" CEILING CUTOUT
2
1
6
4
5
7
8
3
7 3/4"
9"
7 1/2"
12 15/16" MIN
24 1/8" MAX
®
Performance Recessed CFL Downlighting 2001F
Page 1 of 1 3 ¾" Aperture, 1 Light, Compact Fluorescent, Non-IC, Frame-In Kit
Complete Fixture consist s of Frame-In Kit and Reflector Trim. Select each separately.
UniFrame™ Compact Fluorescent Performance Series Reflector Trims
UniFrame™
Frame-In Kit
2001F13U
13w Quad/Triple
GX24q-1 Base
120v – 0.13amp max
277v – 0.06amp max
Vertical Open Vertical Wall
2001CL
2001CD
2001WH
Wash - Single
2001CL SW
2001CDSW
2001WHSW
Vertical Wet Location
Clear Lens
2001CLC
2001CDC
2001WHC
Vertical Wet Location
Fresnel Lens
2001CLF
2001CDF
2001WHF
Vertical Wet Location
Opal Lens
2001CLO
2001CDO
2001WHO
2001F18U
18w Triple
GX24q-2 Base
120v – 0.16amp max
277v – 0.07amp max
Features
1. Mounting Frame: .036" (#20ga.) Galvanized Steel. Accommodates all
ceilings up to 1-1/2" thick; including existing or inaccessible areas.
2. Trim Clips: “Push In / Twist Out” Stainless Steel clips hold reflector flush
to ceiling.
3. Junction Box: 2" x 4" x 3-1/2" (22cu.in.) .032" (#22ga.) galvanized steel.
UL Listed for maximum of 8 (#12ga.) through branch circuit conductors.
4. UniFrame™ Mounting System – Grid Ceiling: Tool free mounting in
grid ceilings. .036" (20ga.) Galvanized Steel interlocking slide bars adjust
to 24-1/8" long accommodating 24" O.C. Ceiling Grid. Adjustable speed
clamps for positive attachment to grid ceiling systems.
5. UniFrame™ Mounting System – Wood Joist Ceiling: Integral nailing
tabs, alignment guides, fastener holes and bendable strapping guides for
wood joist installation. Galvanized Steel interlocking slide bars adjust
from 12-15/16" to 24-1/8" long to accommodate 16" and 24" O.C. joist
spacing, with or without strapping.
6. Ballast: 120V – 277V UL Listed Electronic Ballast, end of lamp life
protection, class “P” thermally protected, class “A” sound rating.
7. Socket: Four-pin base, molded thermoplastic socket, prewired with No. 18
AWM leads to ballast.
8. Socket Housing: .036" (#20ga.) Galvanized Steel housing at taches to
reflector trim by spring clip for precise optic alignment.
Labels: cULus Listed. Suitable for Damp Locations.
Accessories: 1967A Extra Thick Ceiling Adapter (up to 2" thk)
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Genlyte Group LLC • B0108
Loading...