Lightolier Track Lighting System FXS User Manual
Tangent
95 5/8 in [2429 mm]
3/16 in
3/16 in
1
2
6
47 5/8 in [1210 mm]
95 5/8 in [2429 mm]
143 5/8 in [3648 mm]
3/16 in
3/16 in
1
6
6
95 5/8 in [2429 mm]
1 3/8 in [34 mm]
3/8 in [9 mm]
3/16 in
2
6
4
3
™
Track Lighting System FXS
Page 1 of 2 Suspension Track
FXS04
FXS08
FX S12
FXS52
FXS53
FXS54
FXS55
FXS67
5
FXS68
FXS82
FXS84
FXS86
FXT08
FX10 0
Ordering Information
Catalog No. Finish Description Track Mountings
FXS04
FXS08
FXS12
FXS52
FXS53
FXS54
FXS55
FXS67
FXS68
FXS84
FXS86
FXT08
FX100
Clear Anodized
Clear Anodized
Clear Anodized
Silver
Silver
Silver
Clear Anodized
Silver
Silver
Silver
Silver
Clear Anodized
n/a
Features
Tangent Suspended Track and Truss Track are a one-circuit electrical distribution
system designed to support and supply all Tangent lighting units in a flexible
manner. The track can be installed individually in straight runs or in a variety of
patterns using the appropriate connectors. The track may also be field bent by
hand or with an FX100 bending tool into cur ves with a minimum radius of 3'. All
track lengths can be field cut.
1. Tangent Suspended Track: Anodized aluminum with a clear protective
coating
2. Truss Track: Anodized aluminum with a clear protective coating
3. Insulating Liner: Clear polycarbonate; houses conductors
4. Conductor (2): Tin plated copper
5. Polarity Dimple: Identifies the 120V line conductor
6. End Cap: Silver painted polycarbonate
Finish
Tangent Suspended Track and Truss track are anodized aluminum with a clear
protective coating. Connectors and end caps are painted in a coordinating silver
finish. All painted finishes are baked enamel.
Lightolier is a Philips group brand
4’ Tangent Suspension Beam Track
8’ Tangent Suspension Beam Track
12’ Tangent Suspension Beam Track
Suspension Variable Angle Coupler, Mechanical Only
Suspension Variable Angle Coupler, Electro/Mechanical
Suspension Mini Coupler, Electro/Mechanical
Suspension Mini Coupler, Mechanical Only
Tangent Suspended Power Feed Canopy, 10'
Tangent Suspension Non-Powered Cable Kit, 8'
Tangent Suspension 18" Stem Kit
Tangent Suspension 48" Stem Kit
8’ Tangent Suspended Truss Track
Bending Tool
Electrical
Capacity is 20 amps at 120 volts, 60Hz per branch circuit. The track units are
polarized and continuously grounded throughout. Electrical conductors are
contained in the polycarbonate extrusion. Track is intended for wiring to branch
circuit building wire with ground. All wiring must be in accordance with National
and Local Codes.
Labels
cULus; Patent Pending
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D1008
Tangent Suspended Track and Suspended
Truss Track may be suspended with stems at a
maximum of 6’ on center. Additional suspension
points may be necessar y when creating patterns
or for balancing loads.
Tangent
1/4 in
Stainless Steel
Aircraft Cable
1/32 in
Canopy
Diameter
4 5/8 in
Stem or cable
not included
Cord not for
mechanical support
.090 in [2.3 mm] Space Between
Two Tracks
3 1/8 in
[79.3 mm]
3 1/8 in
[79.3 mm]
.090 in
[2.3 mm]
1/4 in
Canopy
Diameter
4 5/8 in
Steel Rod
1/4 in
1 in [25.4 mm]
5 1/3 in
[136.44 mm]
71°
MIN
71°
MIN
1 in [25.4 mm]
5 1/3 in
[136.44 mm]
5.00 in
127 mm
3.00 in
76 mm
™
Track Lighting System FXS
Page 2 of 2 Suspension Track
Track Mounting, Power Feed Systems and Connectors
Stem Mounting Kits
Mounts to a 4" or 3" octagon outlet box. When
making run of track, do not exceed 6' bet ween
stems. Use additional stems for added support.
Power is fed to the track with Suspended Power
Feed Canopy. Stem can be field cut. For Individual
FXS12 Installations 3 stems are required
Not recommended for wall mounting.
Stem mounts to track, or connectors.
FXS84 18" Silver
FXS86 48" Silver
Suspended Power Feed Canopy, 10'
Mounts anywhere along track for power feed from
a 4" octagonal outlet box.
Max load 20 amps @ 120V, 60Hz.
Order stem or cable separately.
Suspension Non-Powered Cable Kit 8'
Mounts to 4" or 3" octagonal outlet box supports
Suspension Track and Truss Track at any point.
Cable has an adjusting collar for suspension height
adjustability. Do not exceed 6' between cables. Use
additional cables for added suppor t. May be field
cut. Cable mounts to track or connectors.
FXS68 Silver
Suspension Mini Coupler, Electro/ Mechanical
Joins tracks together electrically and mechanically.
The mini-coupler is polarized. Not a feed point.
Variable Angle Connector, Electro/Mechanical
Joins tracks together electrically and mechanically.
Allows for lef t and right angles with a total of 216°
of rotation. The variable angle connector is polarized and pre-wired. Not a feed point.
FXS53 Silver
Variable Angle Connector, Mechanical Only
Permits mechanical attachment of t wo track
sections while maintaining electrical separation.
Allows for lef t and right angles with a total of 216°
of rotation. Not a feed point.
FXS67 Silver
Suspension Mini Coupler, Mechanical Only
Permits mechanical attachment of t wo track sections while maintaining electrical separation. Not
a feed point.
Lightolier is a Philips group brand
FXS55 Clear Anodized
FXS54 Silver
Bending Tool
Used to field bend all Tangent Track into Cur ves
with a minimum radius of 3ft.
FX100 Silver
Job Information Type:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • D1008
FXS52 Silver
Loading...