Lightolier T-BAR RUNNER MOUNTING CLIPS, 6087 Instructions For Maintenance Reference Manual

I

f

Y

READ AND UNDERSTANDTHESE INSTRUCTIONSBEFOREINSTALLINGFIXTURE

INSTRUCTION SHEET NO,
This fixture is intendedfor installationin accordancewith the NationalElectricalCode and local
regulations.Toassurefullcompliancewith localcodesandregulations,checkwithyourlocal

electrical

inspector before installation. To prevent electrical shock, turnoff electricity at fuse box before proceeding.

IS:6087

Retain these instructions for maintenance reference.

R0493

Page 1 of 1

T-BAR RUNNER MOUNTING CLIPS

FOR USE WITH BASIC OR ADVENT LYTESPAN” TRACK SYSTEM ONLY

15/16”OR9/16”ATFACE OFT-BARRUNNER

SQUARE EDGE

REGRESSED

CEILING PANEL

EDGECEILING PANEL

3“” L

‘Iv

6089

!

MOUNTINGCLIP

Ifi ~

6087

TRACKUNIT

MOUNTINGCLIP

TRACKUNIT

SQUAREEDGEPANEL

REGRESSED EDGE PANEL

NOTE: Track can be positioned at any angle relative of the T-BAR.

1. Use2MOUNTlNG CLlPSfor2’and 4’track units. Use3MOUNTlNG CLlPSfor8’track unit.

2. Rotate MOUNTING CLIP onto T-BAR, See Fig, 1,

3. Rotate the white portionof the MOUNTING CLIP to initial positionand rotate intoTrack Unit. See Fig. 2.

T-BAR

INITIAL POSITION

ROTATE CLIP

CLOCKWISE

WHITE PORTION

OF CLIP

FIG. 1

—

CLIP FOR

4

OUTLET BOX
OPENING

NOTE: (4)CLIPS ARE ONLY USED
ON OUTLET BOX FOR GRID
CEILING CANOPY KIT 6096WH
WHEN NECESSARY

FIG. 2

1-M <5

l-m-c>1-1E R“

ERWR<!RK:ZR