Lightolier T2 User Manual
PRISTINE™ T2 Task Lighting
Installation Instructions
939504881 Rev B
Find the center and mark holes as indicated. Drive screws into binder bin
1
or shelf with shoulder washers. (Do not over drive screws)
.149" diameter
#25 drill
12"
6"
91/4"
from the back edge
Position the light’s keyhole slots over the screws, shift right to engage.
2
keyhole
For Dimming Units Only:
• Press and release button
for on/off.
• Press and hold to dim.
• Release to set dimming level.
WARNING:
To Prevent Risk
of Electrical Shock . . .
1 All electrical installations must be done by
qualified personnel in accordance with codes
regulations applicable at the installation site.
2 Before beginning work, ensure that electrical
power has been removed from the circuits that
are being connected to or disconnected from.
45 Industrial Way
Wilmington, MA 01887
3 Ensure that circuits to which the lights are connected
are properly grounded and are the correct voltage.
4 To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
Loading...