Lightolier SW STRIP SL User Manual

STANDARD STRIP SLIMLINE SW STRIP SL
Page 1 of 2 4-1/8" WIDE x 1-7/8" DEEP x 48", 72", 96", 192" LENGTHS, 1 OR 2 LAMP, T8 OR T12, SLIMLINE
DIMENSIONS
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 SECTION 3A/Folio H100-40
Features
• Fixtures suitable for individual, row, surface, or suspension mount­ing.
• Efficiency 91.0% (T12).
• Quarter turn latch secures channel cover for easy wireway access.
• Heavy duty channel of code gauge die formed steel.
• Fully enclosed wiring.
• U.L. Listed snap-on end caps.
• Combination end cap for continuous row mounting.
• Green grounding screw installed in channel.
• Lampholders may be individually replaced or rewired.
• UL listed for direct mounting on low density ceilings and damp locations.
3-3/4" (T12)
(95mm)
3-1/2" (T8)
(89mm)
1 LAMP
6' AND 8' CHANNEL
4" (102mm)
3-1/16" (78mm)
2" Dia. K.O.
S Hook K.O. (8)
6-3/8" (162mm)
7/8" Dia. K.O. (8)
24" (610mm)
6" (152mm)
4-5/8" (117mm)
72" (1829mm) or 96" (2438mm)
4' CHANNEL
SIDE VIEW
2 LAMP
S Hook K.O. (8)
4-5/8" (117mm)
6" (152mm)
4" (102mm)
48" (1219mm)
4-1/8"
(105mm)
7/8" Dia.
K.O. (4)
2" Dia. K.O.
5-7/8" (149mm)5-7/8" (149mm)
7/8" (22mm)
7/8" Dia. K.O. (4)
1-7/8"
(48mm)
1/2" Dia. K.O. (2)
1-1/8"
6-3/8" (162mm)
4-1/8"
(105mm)
3-3/4" (T12)
(95mm)
3-1/2" (T8)
(89mm)
STANDARD STRIP SLIMLINE SW STRIP SL
Page 2 of 2 4-1/8" WIDE x 1-7/8" DEEP x 48", 72", 96", 192" LENGTHS, 1 OR 2 LAMP, T8 OR T12, SLIMLINE
Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 SECTION 3A/Folio H100-40
Job Information Type:
SPECIFICATIONS
MATERIALS: Chassis parts are die-formed heavy gauge cold rolled steel, 4-1/8"
channel width.
BALLAST COVER: Code gauge steel secured with quarter turn latch. FINISH: Chassis exterior-phosphate undercoating, baked white polyester enamel. ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If
K.O. is within 3" of ballast, use wire suitable for at least 90°.
LABELS: I.B.E.W./UL and ULc Listed.
OPTIONS & ACCESSORIES
FUSING: Internal fast-blow fusing.
SUFFIX: GLR. Internal slow-blow fusing. SUFFIX: GMF.
FLUORESCENT EMERGENCY LIGHTING SYSTEM: Factory-installed emer-
gency power battery pack with charger and inverter. SUFFIX: EM.
STEM AND CANOPY SETS: Suspends fixture 6", 12", 18" or 24" from surface. Catalog Number: ASC6
CSP (6"), ASC12 CSP (12"), ASC18 CSP (18"), ASC24 CSP (24"). CANOPY SPACER: Suspends fixture 1-1/2" from sur­face. Order Catalog Number: AC1 CSP. GROUNDED CONVENIENCE OUTLET: 120 volt only. SUFFIX: CO.
4' WIRE GUARD (WHITE): Specify two for 96" fix- tures. Catalog Number: AWG3W CSP.
CHAIN HANGING KIT: Includes two 5' heavy duty
link chains with sturdy “V” hooks for fixture suspen­sion. Catalog Number:
AH5 CSP. TWIST TEE: For exposed T-bar mounting, 1-7/8" deep channel. Catalog Number: NAH3 CSP. HEAVY DUTY COUPLER: Catalog Number: NHDC-W CSP. SLIDING HANGER: Catalog Number: NAHW CSP.
STEM AND
CANOPY SET
ASC6 CSP (6")
CANOPY
SPACER
AC1 CSP
CHAIN
HANGING
KIT
AH5 CSP
SLIDING HANGER
NAHW CSP
TWIST TEE
NAH3 CSP
HEAVY DUTY
COUPLING
NHDC-W CSP
PHOTOMETRY
ORDERING INFORMATION Explanation of Catalog Number. Example: SW8S259SL120SO
FIXTURE LENGTH:
4=48" 6=72" 8=96"
16=192"
NUMBER OF
LAMPS IN
WIDTH:
(By Others)
1=1 Lamp 2=2 Lamp
LAMP WATTS:
59SL =59w SL T8, 8'
Length2
48SL =38w T12 Slimline
(4' Length)
72SL =55w T12 Slimline
(6' Length)
96SL =75w T12 Slimline
(8' Length)
VOLTAGE:
120 or 277
BALLAST TYPE:
1-1 & 1-2 Lamp Mag. T12 LE
<20THD <10THD
1-1 & 1-2 Lamp Elec. T8 SO* H
I*
1-4 Lamp Elec. T8 O4* H4* *Instant Start Standard
OPTIONS:
Add appropriate suffix to catalog
no., ie: (GLR)
SW
REPORT NO: G13957P CATALOG NO:
SW8S259SL120LE LAMP TYPE: F96 / T8 LUMENS PER LAMP: 5500 TOTAL EFFICIENCY: 91.0% CIE TYPE: SEMI-DIRECT SPACING CRITERIA: 1.58 SHIELDING ANGLE: 180
LER = FS - 59.5 Watts - 160.0 BF - 0.95 Comparative yearly lighting energy cost per 1000 lumens = $4.03
LAMP
CONFIGURATION:
S=Standard T= 3' Lamps in Tandem
(For 72" units) 4' Lamps in Tamdem
(For 96" units) 8' Lamps in Tand
em
(For 192" units)
STANDARD STRIP
SLIMLINE:
4-1/8" Wide Channel
coefficients of utilization — zonal cavity method (effective floor cavity reflectance 0.20)
RF 20 50 30 RC 80 80 30
RW 70 50 30 50 30 10 50 30 10
1938783 888479 767370 2837568 797165 656055 3756556 716254 565045 4685748 655446 494338 5625041 594840 443732 6574536 544335 393327 7534032 503931 362924 8493628 473528 322621 9463326 443225 302319
10 43 31 23 41 29 22 27 21 17
Loading...