Optical System : Single lamp powers an upper wide spaced indirect optic and a lowerLampholder : RX7s, double ended base.
narrow spaced direct sand-blasted optic. Glass shield redirects light into the space.
Upper wide spaced spun Alzak optic with clear glass micro switch protected. Narrowcharacteristics throughout the life of the lamp and through a wide range
spacing spun Alzak downlight optic. Bottom glass sandblasted outer ring with clearof operating voltages. Ballasts available for 120 volts and 277 volts
centre.operation. No universal ballast option.
Stainless Steel Construction : Quality all stainless steel form and hardware.Microswich : Remote, turn off electricity during maintenance into the
Hardware : Exposed hardware adds high design element to the form.
Ballast : New low wattage CWA magnetic or electronic ballast assure long lamp H1 : Electronic MH / CMH 120V
life and stable operation of the ceramic metal halide lamp source.
Ballast Compartment : Stainless steel construction with removeable ballast coverMagnetic Ballast : CWA (Constant Wattage Autotransformer) with
Hollow rods shield wiring to optical chamber.triple tap 120/277/347 volts operation. Ballast maintains steady lamp
Optical Chamber : Circular brushed stainless steel construction and all stainless
steel hardware, with clear Borosilicate glass at top and sand blasted Borosilate glass at
operating characteristics for longer lamp life and color stability.
H5 : Magnetic CWA MH 120/277/347V
bottom.
Ceramic Lamp Source : CMH lamp source assures stable color over the life of
the lamp and longer lamp life.For wall unit, see Zylinder Wall SL403.
Large Glass : Sand blasted glass suspended between the two chambers. Hollow
threaded rods joined together to hold the glass in position.Add code (-F1) for 120 volts, (-F2) for 277 volts or (-F3) for 347
Dome Reflector : For a better direct distribution pattern, the Dome Reflector can be
installed onto the Large Glass. See the appropriate photometry on reverse side of sheet.
Options and Accessories
Fuse : 2 Amps internal fusing. Consult your Lightolier representative.
volts.
Finish
Stainless steel : Brushed high quality stainless steel alloy.
Mounting Labels
Mounting : Suitable for mounting on standard octogonal box. Must be held in UL "c/us" Listed. For dry locations only.
place by additional hardware to support heavy weight luminaire.
Luminaire Weight : 39 lbs (magnetic), 36.5 lbs (electronic).
WE RESERVE THE RIGHT TO CHANGE DETAILS OF DESIGN, MATERIALS AND FINISH, IN ANY WAY
THAT WILL NOT ALTER INSTALLED APPEARANCE OR REDUCE FUNCTION AND PERFORMANCE.
Lightolier Canada, 3015 Louis Amos Lachine, (Quebec) H8T 1C4