Lightolier SL203A User Manual

Spectral Architectural Lighting SL203A

Page 1 of 1 Fluted Disk Fluted Forms 1-22W/40W T5 Circular

3 1/2"

(89 mm)

18 1/4"

(464mm)

Ordering Guide (complete unit only)

Cat. No. Lamp (circular) Volt Finish

SL203APZU 1-22W / 1-40W CT5 120/277V Anodized Aluminum & Sand Blasted Glass

Features

1. Form: Round form fabricated from slitted corrugated anodized aluminum.

Slits hold the sand blasted glass and reflector element. The illuminated edge of the glass is visible through the corrugations.

2. Glass: Center sand blasted glass with clear outer ring. Image of lamps seen

through the glass to create a geometric pattern on the wall or ceiling.

3. Housing: Spun painted steel construction. Mounting plate houses the bal-

last and lamp sockets.

Options and Accessories

Double Switching: Consult your Lightolier representative for more information.

Perforated Form: Consult your Lightolier representative for more information.

Dimming Ballast: Consult your Lightolier representative for more information.

Finish

Anodized corrugated aluminum sheet with precise flutes. All painted parts are with powder coat paint process.

Mounting

Mounting: Surface mounting to wall or ceiling surfaces.

Lamp Change: Fluted housing simply twists-off. Held in place by 3 locking pins.

Luminaire Weight: 10.5 lbs.

Labels

UL “c/us” Listed. Suitable for damp locations.

Electrical

Ballast: Electronic Program Rapid Start T5 circular lamps ballast. Universal

voltage “U” ballast automatically detect 120 volts or 277 volts operation. Ballast use cathode heater shut-off to increase T5 round lamp life.

Lampholder: 2GX13 base, 4 Pin.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s): Notes:

Lightolier a Genlyte company www.lightolier.com

Specifications and Main Features