Lightolier SL111C1 User Manual

46-3/16"

(1173mm)

1-1/2"

(38 mm)

Multi-fonction

block

Plug insert

Wand

Chanel Cover

Ballast Chanel

Lampholder

housing

14-3/8"

(365mm)

44-1/2"

(1130mm)

2"

(51mm)

43-1/2"

(1105mm)

1-3/8"

(35mm)

3-1/2"

(89mm)

43-7/8"

(1114mm)

1-3/4"

(45mm)

1-7/8"

(48mm)

KUBIK 1.5 SL111C1

Page 1 of 5 Louver Suspended Unit

Dimensions

SPR: Add to unit. The Spiral

louver produces refined, effective
lengthwise shielding to minimize add
to direct view of the light source.

ORB: Add to unit. The Orbit louver
displays perfect balance as it rotates
into any number of positions from uplight
to downlight to wall washing. (Position
shown below).

TRL: Add to unit. The Tri-Level louver
features three peg holes for varying
louver height and the resulting
downlight distribution. (Position
shown beside).

Ordering guide (complete luminaire consist of unit & power feed )

Unit/Louver Cat. No. Shielding Lamp (linear) Volts Ballast Type Finish

SL111C128PIU 120/277V

SL111C128PIH

SL111C154PIU SPR 120/277V

SL111C154PIH ORB 347V

SL111C154MZ1 TRL 1-54W T5 HO 120V

SL111C154MZ2 277V

SL111C154PCU 120/277V Dimming PowerSpec HDF

Features

Ballast Channel: 0.05" (1.3rnm) min. thick, 1-1/2" x 1-1/2" (38mm x 38mm) brushed

and anodized extruded aluminum ballast channel. Provided with knock-outs and
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover.
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for
continuous rows and patterns.
Spiral Louver: 0.022" (56mm) to 0.089" (2.3mm) thick painted aluminum. Slide over
the lamp and attach as a ground to the luminaire to operate the lamp properly.
Orbit Louver: 0.015" (0.38mm) thick painted aluminum semi-diffused. Slide over the
lamp and attach as a ground to the luminaire to operate the lamp properly.
Wand: 0.125" (3.2mm) thick brushed and anodized aluminum tubing.

1-28W T5

347V

Programmed Rapid Start

Spiral Louver: Textured Light Grey (paint)

Orbit Louver: Semi-diffused

Anodized Aluminum

Units: Brushed and Anodized Aluminum

Dimming Mark 10

Tri-Louver: Semi-diffused

Anodized Aluminuma

Plug Insert (2): 0.56" (14min) dia. 0.31" (8mm) min, deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
Lampholder Housing (2): 0.08" (2mrn) min. thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Notes:

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

© 2008 Philips Group • SL111C1.pdf

Lightolier is a Philips group brand

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • [phone] • [phone]

KUBIK 1.5 SL111C1

4-1/2"

(114 mm)

Square

Page 2 of 5 Louver Suspended Unit

Accessories/Options

Cat. No. Finish Feed Canopy Kit

SL003JLG
SL003JWH

Cat. No. Finish Invisible Feed Kit

SL003K Corrosion Protected Accepts conduit or cable with 3/8" (10mm) or 1/2" (13mm)

Cat. No. Finish Grid Ceiling Feed Kit

SL003LLG
SL003LWH

Textured Light Grey
White

Textured Light Grey
White

Mounts to end or middle of the channel for power feed from
3" (76mm) or 4" (102mm) octagonal outlet box. Kit includes
one 0.05" (1.3mm) thick, 4-1/2" (114mm) grounded square steel
plate. Comes with 4 wires 18 AWG, 10 Amps max.

electrical connector (by others). Kit includes one 0.06" (1.5mm)
thick wall by 1/2" (13mm) dia. seamless steel stem and,
one 0.09" (2.3mm) thick by 5/8" (16mm) by 15/16" (24mm) dia.
aluminum connector. (20 Amps max.)

Mounts along runner or at the intersection of runners. Kit
Includes one 2-1/8" (54mm) deep by 4" (102mm) grounded
octagonal outlet box, one 0.05" (1.3mm) thick universal
crossbar, one 4-1/2" (114mm) white plastic square, and two
t-bar clips 5/32" (4mm) thick spacer, one 0.04" (1 mm) thick
aluminum canopy and two t-bar wrap around clips. Comes
with 4 wires 18 AWG, 10 Amps max.

Cat. No. Finish Power Feed Stem Kit

SLO03M18LG
SLO03M36LG
SLO03M48LG
SLO03M72LG
SLO03M18WH
SLO03M36WH
SL003M48WH
SLO03M72WH

18" Textured Light Grey
36" Textured Light Grey
48" Textured Light Grey
72" Textured Light Grey
18" White
36" White
48" White
72" White

Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box
Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel
canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless
steel stem, available in 4 different lengths and two decorative
cylinder head screws. Complete installation of Power Feed
Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS. Comes
with 5 pre-assembled wires. 10 Amps max.

Cat. No. Finish Stem Mounting Kit (non-electrical)

SLO04M18LG
SLO04M36LG
SLO04M48LG
SLO04M72LG
SLO04M18WH
SLO04M36WH
SLO04M48WH
SLO04M72WH

18" Textured Light Grey
36" Textured Light Grey
48" Textured Light Grey
72" Textured Light Grey
18" White
36" White
48" White
72" White

Mounts to a 3" (76mm) or 4" (102mm) octagonal outlet box
Kit includes one 0.024" (0 6mm) thick, 5" (127mm) round steel
canopy, and one 0.06" (1.5mm) thick, 1/2" (13mm) dia. seamless
steel stem, available in 4 different lengths and two decorative
cylinder head screws. Complete installation of Power Feed
Stem Kit. Field cuttable, re-thread stem 1/4-18 NPS.

Job Information Type:

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

© 2008 Philips Group • SL111C1.pdf

Lightolier is a Philips group brand

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • [phone] • [phone]

KUBIK 1.5 SL111C1

46-3/16"

(1173 mm)

Kubik 1.5

1.5"

(38 mm)

Page 3 of 5 Louver Suspended Unit

Cat. No. Finish Power Feed Cable Kit

SL003NLG
SL003NWH

Cat. No. Finish Cable Mounting Kit (non-electrical)

SL004NLG
SL004NWH

Textured Light Grey
White

Textured Light Grey
White

Mounts to a 3" (76mm) or 4" (102mm) octogonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1.3mm) thick grounded crossbar threaded
stud, one 0.046" (1.2mm), 96" (2438mm) long aircraft galvanized
cable with zinc plated hanger adjusting glider hardware,
two white plastic cable stay and one 18 AWG (AWM), 10 feet
(3048mm) long white cord, 10 Amps max.

Mounts to a 3" (76mm) or 4" (10mm) octagonal outlet box.
Kit includes one 0.024" (0.6mm) thick , 5" (127mm) round steel
canopy, one 0.05" (1 3mm) thick grounded crossbar, threaded
stud, one 0.046" (1.2mm) , 96' (24 38mm) long galvanized
aircraf t galvanized cable with zinc plated hanger and
adjusting glider hardware. Can be used with either Cable
or Stem Power Feed Kit.

Cat. No. Finish Extension Blank (4')

SL003P4 Brushed Aluminum Permits power feed between two 1.5" x 1.5" (38mm x 38mm)

brushed and anodized units in a straight run with supplied
extra wires 18 AWG, 10 Amps max, and wire connectors
to energize them. Includes one 46-3/16" (1173mm) long
extruded aluminum channel and cover, two solid aluminum
multi-function blocks as a wireway, plug inserts and wire
connectors.

Cat. No. Finish Invisible Coupler

SL003Q Zinc plated Invisible coupler for joining two Kubik 1.5 units together

mechanically or/and electrically. Recommended for direct
surface mounting. Comes with 4 wires 18 AWG, 10 Amps max.

Cat. No. Finish 5 Face Connector

SL003R Brushed Aluminum Kubik 1.5 units coupled with exclusive solid brushed and

anodized aluminum 5-face connectors and power feed can
satisfy virtually any layout requirement. The connector permits
you to create square, rectangular, continuous rows, L, T,
X configurations. Includes four threaded couples, plug insert
(3), four wires 18 AWG and wire connectors, 10 Amps max.

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

© 2008 Philips Group • SL111C1.pdf

Lightolier is a Philips group brand

Job Information Type:

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • [phone] • [phone]

KUBIK 1.5 SL111C1

400

300

200

Page 4 of 5 Louver Suspended Unit

Performance

CANDLEPOWER CURVE

REPORT NO: C9882
CAT. NO: SL111C128PI/SL002ALG

1 x 28W T5 at 2610 Lumens
Efficiency: 57.7 %
Candela at Nadir: 312cd

ZONE
DEG

ALONG 22.5 45 67.5 ACROSS

0 312 312 312 312 312
5 316 313 311 309 304
15 284 279 290 303 311
25 235 236 264 295 312
35 179 191 232 281 309
45 120 141 203 265 308
55 61 93 172 248 299
65 33 52 145 232 287
75 22 34 120 218 278
85 13 27 102 203 265
90 0 21 90 189 253
95 0 20 97 198 260
105 0 17 97 196 258
115 0 11 75 187 252
125 0 9 19 82 134
135 0 0 0 5 27
145 0 0 0 0 0
155 0 0 0 0 0
165 0 0 0 0 0
175 0 0 0 0 0
180 0 0 0 0 0

CANDLEPOWER

ZONAL CAVITY METHOD * EFFECTIVE FLOOR CAVITY REFLECTANCE = .20

80 70 50

Wall Reflectance

70 50 30 10 70 50 30 10 50 30 10

0 .65 .65 .65 .65 .62 .62 .62 .62 .56 .56 .56
1 .58 .55 .52 .49 .55 .52 .49 .47 .47 .44 .42
2 .52 .47 .42 .39 .49 .44 .40 .37 .40 .37 .34
3 .47 .41 .36 .32 .45 .39 .34 .31 .35 .31 .28
4 .43 .36 .31 .27 .41 .34 .30 .26 .31 .27 .24
5 .39 .32 .26 .22 .37 .30 .25 .22 .27 .23 .20
6 .36 .28 .23 .19 .34 .27 .22 .19 .24 .20 .17
7 .33 .25 .20 .17 .32 .24 .20 .16 .22 .18 .15
8 .31 .23 .18 .14 .29 .22 .17 .14 .20 .16 .13
9 .28 .21 .16 .12 .27 .20 .15 .12 .18 .14 .11

Room Cavity Ratio

10 .26 .19 .14 .11 .25 .18 .14 .11 .16 .13 .10

DETERMINED IN ACCORDANCE WITH CURRENT IES PUBLISHED PROCEDURES

LUMINAIRE INPUT WATTS = 33.2

DISTRIBUTION

ZONE LUMENS % LAMP % LUMINAIRE

0-30 235 9.05 15.68
0-40 383 14.75 25.55
0-60 697 26.81 46.50
0-90 1110 42.69 74.05
40-90 726 27.94 48.43
60-90 412 15.88 27.48
90-180 389 14.96 25.95
0-180 1499 57.65 100.00

COEFFICIENTS OF UTILIZATION

Options and Accessories

Emergency Lighting: Electronic Bodine slim profile battery pack. The emergency

ballast senses the power failure and immediately switches to emergency mode
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins. The
battery fully recharges within 24 hours. Add suffix (EM) to the catalogue numbers.
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your
Lightolier representative.

Markings

cULus Listed. Suitable for damp locations.

Mounting

Direct Mount: No mounting directely are possible at the ceiling no to the wall.
Suspended Mount: Single stem or aircraft cable with round canopy suitable for

mounting one standard outlet box for plaster ceiling exposed installation or suspended
ceilings mounts. Stem and cable mounts can both be used on the same luminaire.

Patterns: Suitable for different patterns in continuous row mounting.

Electrical

Ballast: Electronic slim profile 1 lamp 28W T5 or 54W T5HO linear ballast.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz

operations.

1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.

Finish

Natural brushed and anodized aluminum. All painted parts are
powder coat paint process.

Job Information Type:

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

© 2008 Philips Group • SL111C1.pdf

Lightolier is a Philips group brand

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • [phone] • [phone]

KUBIK 1.5 SL111C1

Page 5 of 5 Louver Suspended Unit

Patterns

SL003R

SL111C1SPR

SL111C1SPR

SL111C1SPR

SL004N

SL111C1SPR

SL004N

SL111C1SPR

SL003M

SL004M

SL003R

SL003Q

SL111C1SPR

SL003N
SL003R

SL111C1SPR

SL003R

SL003P4

SL003J

SL111C1SPR

SL004N

SL111C1SPR

SL003M

SL004N

SL003K

SL111C1SPR

SL111C1SPR

SL003L

SL003R

SL003K

SL111C1SPR

SL111C1SPR

SL003Q

SL003R

SL003N

SL111C1SPR

SL111C1SPR

SL111C1SPR

SL004N

SL111C1SPR

Lightolier www.lightolier.com

631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]

We reserve the right to change details of design, materials and finish.

© 2008 Philips Group • SL111C1.pdf

SL111C1ORB SL111C1TRL

Job Information Type:

Canlyte www.canlyte.com

3015 Louis-Amos, Lachine, Québec H8T 1C4 • [phone] • [phone]

Lightolier is a Philips group brand