Lightolier SH20300 User Manual

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE

This fixture is intended for installation in accordance with the National Code and local regulations.
To assure full compliance with local codes and regulations, check with your local electrical inspector
before installation. To prevent electrical shock, turn off electricity at fuse box before proceeding.

ELECTRICAL

PANEL

(BLACK, RED

WHITE, GREEN)

NETWORK WIRING FOLLOW:

Retain these instructions for maintenance reference.

INSTRUCTIONS FOR WIRING OF AGILI-T FIXTURES

BIAX CABLE

JUNCTION

BOX

POWER FEED

END CAP

BUS

(PURPLE, GREY)

JUNCTION BOX

TEE-BAR

CANOPY

INSTRUCTION SHEET NO.

SH20300

Page 1 0f

1

FIXTURE

OUTLET

COMPUTER

TRANSFORMER
120V TO 12V AC

BIAX CABLE

1. BLACK (LINE 1)

2. RED (LINE 2)

3. WHITE (NEUTRAL)

4. GREEN (GROUND)

5. PURPLE (DALI CONTROL)

6. GREY (DALI CONTROL)

NOTE: If supply wires are located within three inches (76.2mm)

of ballast, use wire rated for at least 90 °C

RECOGNIZED
JUNCTION BOX
BY OTHERS

2

4

6

5

3

1

RECOGNIZED

STRAIN
RELIEF
BY OTHERS

525 Education Road, Cornwall K6H 6C7

Tel:[phone] Fax:[phone]

Page 1
Rev.01