Lightolier QVT1SPFOS217 User Manual
Mounting Methods / Features Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 5 / Folio L60-10
Features
• Efficiency 42.6%.
• Oval end cap extends 7/16” beyond luminaire reflector providing a
soft spill of light on luminaire end.
• Swing down microperforated lamp shields for easy relamping and
maintenance.
• Alter soft white film on inside of mesh conceals lamp image
providing balance between reflected and direct light.
• 95% Reflective Alter soft white paint finish.
• All luminaire surfaces have the same visual appearance.
• Easy access to ballast through reflector compartment.
• Easy installation into standard T-Grid ceiling, drywall ceiling or wall
mount.
24-3/4"(629mm)
(130mm)
5-1/8"
11-7/8"(302mm)
T-BAR
24-3/4"(629mm)
(114mm)
4-1/2"
DRYWALL CEILING
11-7/8"(302mm)
ALTER SOFT LIGHTS QVT1SPFOS217
Page 1 of 2 1'x2' SURFACE/WALL DIRECT/INDIRECT FLUORESCENT
2 LAMP, T8, 4 1/2’’ DEEP
MICROPERFORATED MESH LAMP SHIELD
Luminaire mounts in one of three configurations
Shallow plenum
semi-recessed T-Bar
Wall mount
Flush mount directly
to drywall ceiling
Microperforated mesh
lamp shields
Swing down optical system for easy
relamping and maintenance
Quick connect
(114mm)
4-1/2"
WALL
ALTER SOFT LIGHTS QVT1SPFOS217
Page 2 of 2 1'x2' SURFACE/WALL DIRECT/INDIRECT FLUORESCENT
2 LAMP, T8, 4 1/2’’ DEEP
MICROPERFORATED MESH LAMP SHIELD
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Section 5 / Folio L60-10
Job Information Type:
Specifications
MATERIALS: One piece chassis constructed from die formed 20 gauge cold rolled
steel. Reflectors - 95% reflectance baked white acrylic matte paint finish. Soft
white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube type).
If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by
Photometry
Ordering Information
Explanation of Catalog Number. Example: QVT1SPFOS217120SO
QUALITY
VISUAL
STATIC
Recessed direct
indirect soft light
optical system
FIXTURE
WIDTH:
1’
SURFACE
MOUNTED
LAMP SHIELD:
PF = Microperforated
OS = Open slot (no acrylic)
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH:
(NOMINAL 24”)
17 = 17W T8
VOLTAGE:
120V
277V
347V
BALLAST:
OC = Magnetic T8
SO = Electronic T8
SR = Electronic T8 rapid start
PS = PowerSpec
HDF Dimming (Not available in 347V.)
OPTIONS:
R = Radio Interference Filter
QVT 1 S PF OS 2 20
Loading...