Lightolier QVS2GPFOS232 User Manual

Mounting Methods / Features Dimensions
Microperforated mesh lamp shields
Also available with solid opaque swing­down lamp shield
Ceiling compatibility
Swing down optical system for easy relamping and maintenance
Suited to standard exposed Slot T-grid ceilings
ALTER SOFT LIGHTS QVS2GPFOS232
Page 1 of 2 2’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT 2 LAMP, T8,
5 1/2” DEEP MICROPERFORATED MESH LAMP SHIELD
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 Section 5 / Folio L30-10
Features
•Efficiency 56.9%.
• Swing down microperforated lamp shield for easy relamping and maintenance.
• Alter soft white film on inside of mesh conceals lamp image providing balance between reflected and direct light.
• Fully recessed luminaire and lamp compartment.
• 95% Reflective Alter soft white paint finish.
• Specular interior reflector.
• One piece body for easy installation.
• Easy access to ballast through lamp compartment.
• Fits standard T-Grid ceilings.
• Optional acrylic drop-down visual element.
Ordering Information Explanation of Catalog Number Example: QVS2GPFOS232120SO
QUALITY
VISUAL STATIC
Recessed direct
indirect soft
light
optical system
FIXTURE
WIDTH:
2’
CEILING TYPE:
Standard
exposed
T-grid ceilings
LAMP SHIELD:
PF = Microperforated SD = Solid
CLEAR POLISHED
ACRYLIC DROP DOWN VISUAL
ELEMENT:
OS = Open slot (no acrylic) OP = One Piece (no center slot) GC = Clear acrylic GG = Clear acrylic / Green projected color face GB = Clear acrylic / Blue projected color face GR = Clear acrylic / Red projected color face
LAMP
QUANTITY
LAMP/FIXTURE
LENGTH:
(NOMINAL 24”)
32 = 32W T8
VOLTAGE:
120V 277V 347V
BALLAST: OC =Magnetic T8 SO =Electronic T8 instant start SR =Electronic T8 rapid start PS =PowerSpec
HDF Dimming T8 (Not available in 347V.)
OPTIONS: R = Radio Interference Filter O = Emergency Lighting System
(for Canada)
N = Emergency Lighting System
(for U.S.)
SPECIFICATIONS
MATERIALS: One piece chassis constructed from die formed 20 gauge cold
rolled steel. Reflectors - 95% reflectance baked white acrylic matte paint fin­ish. Specular interior reflector. Soft white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os are within 3” of ballast use wire suitable for at least 90C.
Photometry
QVS
2 G 2 32
ALTER SOFT LIGHTS QVS2GPFOS232
Page 2 of 2 2’ X 4’ RECESSED DIRECT/INDIRECT FLUORESCENT 2 LAMP, T8,
5 1/2” DEEP MICROPERFORATED MESH LAMP SHIELD
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595 631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish. © 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902 Section 5 / Folio L30-10
Job Information Type:
LABELS: Listed by
Loading...