Lightolier QVS2GPFOB2FT User Manual

QVS2GPFOB2FT

ALTER SMARTVISION

2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT
2 LAMP, TT5 BI-TUBE, 5 1/2” DEEP
MICROPERFORATED MESH LAMP SHIELD
STATIC

Efficiency 58.5%.
Broadcast 4: Broadcast control requires no programming of

the iGEN ballasts. Dimming message are sent with a global
address from the master Alter Smart Vision luminaire
to up to 3 slaves luminaire with an iGEN address able
ballast (DA). Each ballast receives the same command and
responds unifomity.

Swing down microperforated lamp shield for easy
relamping and maintenance.

Lamp shield specially cut to accomodate Smart
Vision sensor.

Alter soft white film on inside of mesh conceals lamp
image providing balance between reflected and
direct light.

Fully recessed luminaire and lamp compartment.
95% Reflective Alter soft white paint finish.
Specular interior reflector.
One piece body for easy installation.
Easy access to ballast through lamp

compartment.
Fits standard T-Grid ceilings.
Optional acrylic drop-down visual element.

2 x 40W

MOUNTING METHODS/FEATURES DIMENSIONS

Ceiling compatibility

Suited to standard exposed T-grid
ceilings

Swing down optical system for
easy relamping and maintenance

Microperforated mesh lamp shields

Suited to standard exposed Slot T-grid ceilings

integrated motion and light sensor with
optional dimming infrared remote control

FIXTURE TYPE

Genlyte Thomas Company

VOLTS

L10-80

JOB INFORMATION:

QVS2GPFOB2FT

Genlyte Thomas Company

ALTER SMART VISION

2’ X 2’ RECESSED DIRECT/INDIRECT FLUORESCENT

ORDERING INFORMATION Explanation of Catalogue Number Example: QVS2GPFOB2FT120DS

QVS

QUALITY

VISUAL

STATIC
Recessed direct
indirect soft light
optical system

SPECIFICATIONS

MATERIALS: One piece chassis constructed from die formed 20 gauge

cold rolled steel. Reflectors - 95% reflectance baked white acrylic matte
paint finish. Specular aluminum interior reflector. Soft white acrylic film on
inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte paint finish.

2

FIXTURE

WIDTH

2’

G

CEILING

TYPE

Standard exposed
T-grid ceilings

PF

LAMP

SHIELD

PF =Micro­perforated

OB 2 FT

LAMP SHIELD DETAILS

OB =One-piece lamp
shield with sensor

LAMP

QUANTITY

ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube
type). If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL

LAMP/FIXTURE

LENGTH

(NOMINAL 24”)

FT = TT5

Bi-tube

120

VOLTAGE

120

DS

BALLAST TYPE

DS = Gen Broadcast 4 Sensor/ iGEN
ballast*

* For other voltage, consult your
Lightolier representative.

OPTIONS

R =Radio Interface Filter

We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.

631 Airport Road, Fall River, MA 02720 - Tel. [phone]
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - [phone]