Lightolier QVS2GPFLV332 User Manual
Mounting Methods / Features Dimensions
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Volts/Ballast:
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L30-25
Features
• Efficiency 56.7%.
• Flat blade louver with lens overlay and perforated curved side
blades.
• Seamless welded form: curved top and side reflectors are formed
together without any gaps or visual barriers.
• No visible welding, screws, latches, springs, hooks, rivets or plastic
supports.
• 95% reflective Alter soft white paint finish.
• 5-1/2” deep, one-piece body for easy installation.
• Choice of white microperforated blade, white solid blade or grey
solid blade.
• Easy access to ballast through lamp compartment.
• Fits standard T-grid, exposed slot T-grid ceilings and drywall
ceilings.
• Fully recessed luminaire and lamp compartment.
• Optional hold-down clips.
• Luminaire can be row mounted.
ALTER LOUVER QVS2GPFLV332
Page 1 of 2 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT,
3 LAMP, T8, 5 1/2’’ DEEP
MICROPERFORATED MESH WHITE LAMP SHIELD/WHITE, MESH LOUVER
Ceiling compatibility
Suite to standard T-grid ceilings Suite to standard exposed slot
T-grid ceilings
Microperforated mesh
white lamp shields
grey solid louver
Microperforated mesh
white lamp shields
white mesh louver
Microperforated mesh
white lamp shields
white solid louver
23-13/16"(605mm)
(140mm)
5-1/2"
23-13/16"
(605mm)
Access Plate (2)
7/8" K.O.'S
47-13/16"
(1214mm)
23-7/8"
(606mm)
Lightolier a Genlyte Thomas Company www.lightolier.com
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L30-25
Job Information Type:
Specifications
MATERIALS: One piece chassis constructed from die formed 20 gauge cold rolled
steel. Reflectors - 95% reflectance baked white acrylic matte paint finish. Soft
white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish. Louver - flat blade louver with soft white acrylic
overlay.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os are
within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by
Ordering Information
Explanation of Catalog Number Example: QVS2GPFLV332120O3
ALTER LOUVER QVS2GPFLV332
Page 2 of 2 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT,
3 LAMP, T8, 5 1/2’’ DEEP
MICROPERFORATED MESH WHITE LAMP SHIELD/WHITE, MESH LOUVER
FAMILY
QVS: Quality Visual
Louver
LUMINAIRE
WIDTH:
24”
CEILING TYPE:
G = Grid
LAMP SHIELD:
PF = Microperforated mesh
LAMP
QUANTITY
3
LAMP
32 = 32W (T8 nominal 48’)
VOLTAGE:
120V
277V
347V
BALLAST:
OC = Magnetic T8
SO = 1 or 2 LPB electronic T8 IS
SR = 1 or 2 LPB electronic T8 RS
O3 = 3 LPB electronic T8 IS
R3 = 3 LPB electronic T8 RS
PS = PowerSpec HDF Dimming Electronic T8
OPTIONS:
F = Internal Fusing (consult
factory)
N = Emergency lighting
System (for U.S.)
O = Emergency Lighting System
(for Canada)
R = Radio Interference Filter
QVS 2 G PF 3 32
SHIELD DETAILING
LG = Grey solid flat blade louver
LV = White perforated flat blade louver
LW = White solid flat blade louver
LPB : Number of lamps per ballast
Photometry
Loading...