Lightolier QVL2GPFSS432 User Manual

ALTER WAVES QVL2GPFSS432

Page 1 of 2 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT, 4 LAMP, T8, 5 1/2’’ DEEP

MICROPERFORATED MESH DUAL LATERAL LAMP SHIELD

Mounting Methods / Features Dimensions

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L90-30

Features

• Efficiency 58.6%.

• Microperforated mesh lamp shields provide soft awareness of light
source.

• Dual-wave shape lateral lamp shields project light upwards to
reflector and provide indirect light.

• 95% reflective Alter soft white paint finish.

• Fully recessed lamp shields and reflector.

• No visible welding, screws, latches, springs, holes, rivets or plastic
supports.

• Optional solid lamp shields.

• Optional curved lamp shields.

• Alter soft white film inside of microperforated mesh lamp shield
conceals lamp image, providing balance between reflected and
direct light.

• Swing-down lamp shield for easy relamping.

• Easy access to ballast.

• Fits standard T-grid, exposed slot-T-grid and drywall ceilings.

• Optional hold-down clips.

Microperforated mesh lamp shield

Suite to standard T-grid ceilings Suite to standard exposed slot T-grid

ceilings

Ceiling compatibility

23-13/16"

(605mm)

ACCESS PLATE

(2) 7/8" K.O.'S

24"(610mm)

47-13/16"
(1215mm)

3-13/16"

(97mm)

BALLAST

18-1/4"

(464mm)

5-1/2"

(140mm)

ALTER WAVES QVL2GPFSS432

Page 2 of 2 2'x4' RECESSED DIRECT/INDIRECT FLUORESCENT, 4 LAMP, T8, 5 1/2’’ DEEP

MICROPERFORATED MESH DUAL LATERAL LAMP SHIELD

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 Folio L90-30

Job Information Type:

SPECIFICATIONS

MATERIALS: One piece chassis constructed from die formed 20 gauge cold rolled

steel. Reflectors - 95% reflectance baked white acrylic matte paint finish. Soft
white acrylic film on inside of lamp shield conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic matte
high reflectance paint finish.
ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast. If K.Os are
within 3” of ballast use wire suitable for at least 90C.

LABELS: Listed by

Photometry

Ordering Information

Explanation of Catalog Number. Example: QVL2GPFSS43212004

LPB: Number of lamps per ballast.

FAMILY

QVL: Quality Visual

Waves

LUMINAIRE

WIDTH:

24”

CEILING TYPE:

G = Grid

LAMP SHIELD:

PF = Microperforated mesh

SD = Solid White

LAMP

QUANTITY

4

LAMP

32 = 32W (T8 NOMINAL 48’)

VOLTAGE:

120V
277V
347V

BALLAST:

OC = Magnetic T8
SO = 1 or 2 LPB electronic T8 IS
SR = 1 or 2 LPB electronic T8 RS
PS = PowerSpec HDF Dimming Electronic T8
O4 = Electronic 4 LPB T8 IS
R4 = Electronic 4 LPB T8 RS

OPTIONS:

F = Internal Fusing (consult

factory)

N = Emergency lighting

System (for U.S.)

O = Emergency Lighting System

(for Canada)

R = Radio Interference Filter

QVL 2 G 4 32

SHIELD DETAILING

SS = Lateral Wave Side Shields
SR = Lateral Curved Side Shields