Lightolier QVB2SPGOS2FT User Manual

QVB2SPGOS2FT

ALTER SLIM SQUARE

2’ X 2’ SURFACE FLUORESCENT
1 OR 2 TT5
MICROPERFORATED MESH LAMP SHIELD

Efficiency 50.5%.
3/4'' floating frame gives luminaire a look very

thin.
Only 2-5/16'' deep (not including lamp shields)
Swing down microperforated lamp shields for

easy relamping and maintenance.
Alter soft white film on inside of mesh

conceals lamp image and provide balance
between reflected light and direct light.

95% Reflective Alter soft white paint finish.
Specular interior reflector.
One piece body for easy installation.
Easy access to ballast through lamp

compartment.
Optional acrylic drop-down visual element.
Available in white or titanium paint finish.

MOUNTING METHODS/FEATURES DIMENSIONS

Swing down optical system for
easy relamping and maintenance

FIXTURE TYPE

Genlyte Thomas Company

VOLTS

L95-20

Microperforated mesh lamp shields

JOB INFORMATION:

QVB2SPGOS2FT

Genlyte Thomas Company

ALTER SLIM SQUARE

2’ X 2’ SLIM SQUARE SURFACE

ORDERING INFORMATION Explanation of Catalogue Number Example: QVB2SPGOS2FT120SB

QVB

ALTER

SLIM SQUARE

Surface soft light

optical system

SPECIFICATIONS

MATERIALS: Chassis constructed from die formed

20 gauge cold rolled steel. Reflectors - 95% reflectance baked white
acrylic matte paint finish. Soft white acrylic film on inside of lamp shield
conceals lamp image.
FINISH: Chassis exterior - phosphate undercoating, baked white acrylic
matte high reflectance paint finish.

2

FIXTURE

WIDTH

2'

S

CEILING

TYPE

S=Surface

PG

LAMP SHIELD/

LUMINAIRE FINISH
PW =Microperforated
mesh lamp shield/
white border
PG = Microperforated
mesh lamp shield/
titanium body

OS =Open slot (no acrylic)
GC =Clear acrylic
GG =Clear acrylic / Green projected color face
GB =Clear acrylic / Blue projected color face
GR = Clear acrylic / Red projected color face

OS 2 FT

CLEAR POLISHED

ACRYLIC DROP

DOWN VISUAL ELEMENT

120

LAMP

QUANTITY

LAMP/FIXTURE

LENGTH

(NOMINAL 24")

FT=TT5

Bi-tube

ELECTRICAL: Rapid start HPF, thermally protected class “P” ballast (Bi-tube
type). If K.Os are within 3” of ballast use wire suitable for at least 90C.
LABELS: Listed by CSA, UL

VOLTAGE

120,277

347

BALLAST
BE = 50W Electronic TT5 RS
BR = 40W Electronic TT5 RS
BX = 40W Magnetic TT5 RS
PB = 40W TT5 PowerSpec Dimming*
PC = 50/55W TT5 PowerSpec Dimming*
SB = 40W Generic Electronic TT5

*Not available in 347V.

SB

OPTIONS
R =Radio Interface Filter
O =Emergency Lighting
System (for Canada)
N= Emergency
Lighting System
(for U.S.)

We reserve the right to change, materials and finish in any way that will not alter installed appearance or reduce function and performance.

631 Airport Road, Fall River, MA 02720 - Tel. [phone]
C.F.I. Division of Canlyte, Inc.
525 Education Road, Cornwall, Ontario
Canada K6H 6C7 - [phone]