ProSpec
®
Linear Downlight PA1A1175
Page 1 of 2 1 Light AR 111 Series A
Top View
18 1/8"
8
9
8"
13"
5"
16"
Flanged
15 3/8" L X 10" W
10
Trimless
6
13
Ceiling Cutout: 8 3/16"L x 8 3/16"W
Ordering Information: AR 111 Series A
8 3/4"
Depth
1 3/4"
2
3
11 12
1
7" L X 7" W Opening
PA1A117EBL = (Flanged) Black/White PA1A117EBTL = (Trimless) Black
PA1A117EWL = (Flanged) White PA1A117EWTL = (Trimless) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
4
7
5
Cat. No. Lamp Ceiling Trim Aperture Finish
PA1A117EBL (1) 75W AR 111 Overlap Black with White Flange
PA1A117EWL (1) 75W AR 111 Overlap White with White Flange
PA1A117EBTL (1) 75W AR 111 Trimless Black
PA1A117EWTL (1) 75W AR 111 Trimless White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die-cast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 30° (on width) and 40° (on
length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die-formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL , and CSA requirements.
9. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
below.
10. Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Cartridge.
11. Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
12. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
13. Transformer Housing: Die-formed 18 ga. steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible
from below for servicing. 12V Secondary.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound
when used with dimmers, which may be objectionable in acoustically
critical areas.
UL/cUL listed for through branch circuit wiring with maximum of (8) no. 2 AWG
90° C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 4 3/4" dia. series, filters, lenses, screens and louvers. (2) acces-
sories maximum, including lamp cover glass. Lamp guard glass may be replaced
with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • D0711
ProSpec
®
Linear Downlight PA1A1175
Page 2 of 2 1 Light AR 111 Series A
(FC) is initial footcandles at center of beam.
Beam length (L) and beam width (W) are to
where the candlepower is reduced to 50%
of the center beam candlepower.
CBCP is center beam candlepower.
(C) is distance to the center of the beam.
Lamp data shown is typical, and is based on
bare lamp photometrics. Contact lamp manufacturers for availability and performance.
0° Aiming Angle 30° Aiming Angle 30° Aiming Angle
Lamps Beam Spread CBCP Rated
(To 50% CBCP) Life (Hrs.)
D FC L W
D C FC L W
MR16 Low Voltage Halogen Bi-Pin Lamps
30°
D C FC L W
75W AR111
SP 10°
75W AR111
FL 30°
75W AR111
WFL 60°
25000 2000
4500 2000
1300 2000
10’ 250 1.7’ 1.7’
15’ 111 2.6’ 2.6’
20’ 63 3.5’ 3.5’
25’ 40 4.4’ 4.4’
6’ 125 3.2’ 3.2’
8’ 70 4.3’ 4.3’
10’ 45 5.4’ 5.4’
12’ 31 6.4’ 6.4’
3’ 144 3.5’ 3.5’
5’ 52 5.8’ 5.8’
7’ 27 8.1’ 8.1’
9’ 16 10.4’ 10.4’
8’ 4.6’ 254 1.9’ 1.6’
12’ 6.9’ 113 2.8’ 2.4’
16’ 9.2’ 63 3.7’ 3.2’
20’ 11.5’ 41 4.7’ 4.0’
5’ 2.9’ 117 3.7’ 3.1’
7’ 4.0’ 60 5.1’ 4.3’
9’ 5.2’ 36 6.6’ 5.6’
11’ 6.4’ 24 8.1’ 6.8’
3’ 1.7’ 94 5.2’ 4.0’
5’ 2.9’ 34 8.7’ 6.7’
7’ 4.0’ 17 12.1’ 9.3’
9’ 5.2’ 10 15.6’ 12.0’
4’ 6.9’ 195 2.9’ 1.4’
6’ 10.4’ 87 4.3’ 2.1’
8’ 13.9’ 49 5.7’ 2.8’
10’ 17.3’ 31 7.2’ 3.5’
2’ 3.5’ 141 5.5’ 2.1’
3’ 5.2’ 63 8.2’ 3.2’
4’ 6.9’ 35 10.9’ 4.3’
5’ 8.7’ 23 13.7’ 5.4’
1’ 1.7’ 163 * 2.3’
2’ 3.5’ 41 * 4.6’
3’ 5.2’ 18 * 6.9’
4’ 6.9’ 10 * 9.2’
Job Information Type:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2011 Genlyte Group LLC • D0711
Loading...