Lightolier Power Connect RD Cable User Manual

POWER-CONNECT

™

RD CABLE

Page 1 of 2 LIGHTING DISTRIBUTION CABLES, “D” SERIES

APPLICATION DIMENSIONS

Job Information Type:

Job Name:

Cat. No.:

Lamp(s):

Volts/Ballast:

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 OPTIONS/ACCESSORIES/Folio OA40-16

Features

• Pre-wired with female (power out) connector and fixture taps that
are #18 AWG TFN solid copper conductors, connected to “Poke­Home” connectors. Opposite end has 6" leads and 1/2" K.O. connec­tor for mounting to a junction box in a standard 1/2" (7/8" diameter)
knockout.

• Suitable for use in return air spaces above suspended ceilings in
accordance with 1999 N.E.C. 300-22 (c) and 604-3.

• Rated for 20 amp 120 and 277 volt lighting circuits.

• Connector polarized and color-coded for voltage function to prevent
mismating of components.

• #12 AWG THHN stranded copper, 600 volt.

• Pin and socket contacts.

• Meets UL requirements for making or breaking under load.

• I.B.E.W./UL and C-UL labeled.

3/4"

5/8"

2-5/16"

“D” Series Distribution cable distributes the lighting circuit(s)
to the first lighting fixture on the flexible wiring system from a
hardwired system.
It is quickly or easily field-installed by plugging ballast leads
into “Poke-Home” connectors, no wire nuts required.
Snaps into 1/2" knockout.
"D" Series distribution cables add a maximum of 7/8" to fixture
height, available in 1, 2 or 3 circuits.

POWER-CONNECT

™

RD CABLE

Page 2 of 2 LIGHTING DISTRIBUTION CABLES, “D” SERIES

Lightolier a Genlyte Thomas Company www.lightolier.com

Technical Information: [phone] • Fax [phone]
631 Airport Road, Fall River, MA 02720 • [phone] • Fax [phone]
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902 OPTIONS/ACCESSORIES/Folio OA40-16

Job Information Type:

SPECIFICATIONS

• UL and C-UL Listed.

• I.B.E.W. labeled.

• Suitable for use in return air spaces above suspended ceilings in accor­dance with 1999 N.E.C. 300-22 (c) and 604.3.

• Meets UL requirements for making or breaking under load.

• Pin and socket contacts.

• Rated for 20 amp 120 and 277 volt lighting circuits.

• Connector polarized and color-coded for voltage function to prevent mismat­ing of components.

• #12 AWG THHN stranded copper, 600 volt.

• Pre-wired with female (power-out) connector and fixture taps that are #18
AWHG TFN solid copper conductors, connected to “Poke-Home” connectors.

• Opposite end has 6" leads and 1/2" K.O. connector for mounting to a junc­tion box in a standard 1/2" (7/8" diameter) knockout.

WIRING DIAGRAM WIRING

ORDERING INFORMATION

Explanation of Catalog Number. Example: LP–RD–12–1D–09

RDLP

TYPE:

RD =Lighting

Distribution

Cable

LOL POWER

CONNECT

WIRING

CONFIGURATION:
1D - 1 Circuit
2D - 2 Circuit
3D - 3 Circuit
ND - 2 Cir., 2 Neu.

VOLTAGE:
12 - 120v
27 - 277v

LENGTH:

05 - 5'
09 - 9'
15 - 15'
25 - 25'

–

––

–

ONE CIRCUIT

ONE CIRCUIT TAP TWO CIRCUIT TAP

TWO CIRCUIT TAP

TWO CIRCUIT

THREE CIRCUIT

(TYPICAL)

• Black lead to outboard ballast lead.

• Red lead to inboard ballast lead.

• White lead to white ballast leads.