Lightolier PA4M1675 User Manual
1
2
3
4
5
6
7
8
9
1
0
1
1
12,
13
1
4
3
4 1/8"
14 3/8"
9
3/8"
8
3/4"
Depth
3
1 3/8" L X 10" W
5"OC
2
0" L X 5" W Opening
Top View
Flanged
Trimless
1 3/4"
5
"OC
5"OC
1
8 3/8"
Calculite®ProSpec
®
Linear Downlight PA4M1675
Page 1 of 2 4 Light MR16 Series A
Ceiling Cutout: 21 1/16" L x 6 3/16" W
Ordering Information: MR 16 Series A
PA4M167EBL = (Flanged) Black/White
PA4M167EWL = (Flanged) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
PA4M167EBTL = (Trimless) Black
PA4M167EWTL = (Trimless) White
Cat. No. Lamp Ceiling Trim Aperture Finish
PA4M167EBL (4) 75W MR 16* Overlap Black with White Flange
PA4M167EWL (4) 75W MR 16* Overlap White with White Flange
PA4M167EBTL (4) 75W MR 16* Trimless Black
PA4M167EWTL (4) 75W MR 16* Trimless White
*50W max. lamping when using accessories
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of die-formed aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily r
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die-formed 22 ga. steel. Finish: Black
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC and UL requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250°C Teflon®leads
Junction Box:
10.
below.
Lamp and Accessor
11.
Media Cartridge.
12.Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
Lamp Guard:
13.
14.Transformer Housing: Die formed 18 ga. steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V Secondar
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound when
used with dimmers, which may be objectionable in acoustically critical areas.
UL /cUL listed for through branch circuit wiring with maximum of
(8) no. 12 AWG, 90° C.
14 ga. steel, 4" x 31/2" x 2" box. Allows inspection fr
Heat r
emoved.
t:
y Suppor
esistant clear glass. Lamp manufacturers requirement.
.032" steel, flar
ed for easy entr
y 75 V
A. each lamp.
om
y of
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens, and louvers. (2) acces-
sories maximum, including lamp cover glass. Lamp guard glass may be replaced
with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I.B.E.W.
Teflon®is a registered trademark of E.I. DuPont.
US Patent Pending.
ob Inf
J
ob Name:
J
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
e r
W
© 2005 Genlyte Gr
ormation Type:
ve the right to change details of design, materials and finish.
eser
oup LLC • C1105
www
.lightolier
.com
Calculite®ProSpec
®
Linear Downlight PA4M1675
Page 2 of 2 4 Light MR16 Series A
Lighting Per
formance Data
Data are based on bare lamp photometrics.
Dashed lines in beam spreads indicate narrow axes of oval shaped beams.
FC is initial footcandles at center of beam.
L and W are to the point that the candle-
power drops 50% of maximum.
Job Information Type:
.lightolier
Lightolier a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
ve the right to change details of design, materials and finish.
eser
e r
W
© 2005 Genlyte Gr
oup LLC • C1105
www
.com
Loading...