Lightolier PA3M1675 User Manual
1
2
3
4
5
6
7
8
9
10
11
12,
13
14
27 1/8"
14 3/8"
9 3/8"
18 3/8"
24 3/8" L X 10" W
5" OC
5" OC
8 3/4"
Depth
15" L X 5" W Opening
Flanged
Trimless
Top View
Calculite® ProSpec
®
Linear Downlight PA3M1675
Page 1 of 2 3 Light MR 16 Series A
Ceiling Cutout: 16 1/16" L X 6 3/16" W
Ordering Information: MR 16 Series A
PA3M167EBL = (Flanged) Black/White
PA3M167EWL = (Flanged) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
PA3M167EBTL = (Trimless) Black
PA3M167EWTL = (Trimless) White
Cat. No. Lamp Ceiling Trim Aperture Finish
PA3M167EBL (3) 75W MR 16* Overlap Black with White Flange
PA3M167EWL (3) 75W MR 16* Overlap White with White Flange
PA3M167EBTL (3) 75W MR 16* Trimless Black
PA3M167EWTL (3) 75W MR 16* Trimless White
Add a “1” for 120v or “2” for 277v at the *50W max. lamping when using accessories
end of the catalog number for voltage
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together
on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced
with solid glass accessory). Easily installed and removed for lamping with a
simple twisting motion. Constructed of diecast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die formed 22 ga. steel. Finish: Black.
7. Mounting Brackets: Adjustable vertically from outside of housing.
8. Thermal Protector: Meets NEC, UL , and CSA requirements.
9. Lampholder: Steatite for GX/GY 5.3 Bi-Pin lamps. 250° C Teflon® leads.
10. Junction Box: 14 ga. steel, 4 x 3 1/2 x 2" box. Allows inspection from below.
11. Lamp and Accessory Support: .032" steel, flared for easy entry of Media
Cartridge.
12. Lens Retaining Ring: .093" spring steel rod. Holds accessories in place.
13. Lamp Guard: Heat resistant clear glass. Lamp manufacturers requirement.
14. Transformer Housing: Die formed 18 ga. steel.
Electrical
Electronic Transformers: Offer reliable operation and are accessible from
below for servicing. 12V Secondary 75 VA. each lamp.
Dimming Controls: Use only dimmers specifically designed for use with
electronic transformers. Low Voltage fixtures may produce audible sound
when used with dimmers, which may be objectionable in acoustically
critical areas.
Electrical (continued)
UL/cUL listed for through branch circuit wiring with maximum of (8) no. 12 AWG,
90°C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens, and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be
replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I B E W
Teflon® is a registered trademark of E.I. DuPont.
US Patent Pending
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
Calculite® ProSpec
®
Linear Downlight PA3M1675
Page 2 of 2 3 Light MR 16 Series A
Lighting Performance Data
Data are based on bare lamp
photometrics. Dashed lines in beam
spreads indicate narrow axes of
oval shaped beams.
FC is initial footcandles at center
of beam.
L and W are to the point that
the candlepower drops 50% of
maximum.
Job Information Type:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • C0306
Loading...