Lightolier PA3A7050 User Manual

Top View
5
6
7
8
9
10
11
12,
13
14
1
2
3
4
5"
O
.C.
2
O.C.
5"
15" L X 5" W
1 3/4"
17"
27 1/8"
8"
1
3"
8 3/4"
Depth
Flanged
Trimless
5
"
Calculite®ProSpec
®
Linear Downlight PA3A7050
Page 1 of 2 3 Light AR 70 Series A
Ceiling Cutout: 16 1/16" L x 6 3/16" W
Ordering Information: AR 70 Series A
PA3A705EBL = (Flanged) Black/White PA3A705EWL = (Flanged) White
Add a “1” for 120v or “2” for 277v at the end of the catalog number for voltage
PA3A705EBTL = (Trimless) Black PA3A705EWTL = (Trimless) White
Cat. No. Lamp Ceiling Trim Aperture Finish
PA3A705EBL (3) 50W AR 70 Overlap Black with White Flange PA3A705EWL (3) 50W AR 70 Overlap White with White Flange PA3A705EBTL (3) 50W AR 70 Trimless Black PA3A705EWTL (3) 50W AR 70 Trimless White
Features
1. Aperture Frame: Provides clean support for lamp holders and overlapping
flange or trimless installation. Extruded aluminum. Rigidly welded together on all corners.
2. Media Cartridge: Allows convenient loading and removal of up to two
accessories (including lamp cover glass; lamp cover glass may be replaced with solid glass accessory). Easily installed and removed for lamping with a simple twisting motion. Constructed of diecast aluminum.
3. Cross Blade Louver: Extruded aluminum. 1" deep, provides additional
shielding and can be easily removed.
4. Adjustable Ring: Allows 360° horizontal and 35° (on width) and 45° (on
length) vertical adjustment.
5. Tortiontite Spring: For easy installation of aperture frame.
6. Housing: Die formed 22 ga. steel. Finish: Black. Mounting Brackets:
7.
8. Thermal Protector: Meets NEC, UL , and CSA requirements. Lampholder:
9.
10. Junction Box: 14 ga. steel, 4" x 3 1/2" x 2" box. Allows inspection from
11. Lamp and Accessory Support: .032" steel, flared for easy entry of Media
12.
13.
14. Transformer Housing: Die formed 18 ga. steel.
Electrical
Electronic Transformers: Of
below for servicing. 12V Secondar Dimming Controls: Use only dimmers specifically designed for use with electronic transformers. Low V used with dimmers, which may be objectionable in acoustically critical areas.
leads.
.
below
Cartridge.
Lens Retaining Ring: Lamp Guar
d:
Adjustable ver
Double contact bayonet base with 250
.093" spring steel r
esistant clear glass. Lamp manufactur
Heat r
eliable operation and ar
fer r
.
y
oltage fixtur
om outside of housing.
tically fr
od. Holds accessories in place.
oduce audible sound when
es may pr
C #18 gauge T
°
ers requirement.
e accessible fr
eflon
om
®
Electrical (continued)
UL/cUL listed for through branch circuit wiring with maximum of (8) no. 12 AWG, 90°C.
Finish
All painted finishes are powder coated baked enamel.
Options & Accessories
Accessories: 2 1/2" dia. series, filters, lenses, screens and louvers. (2)
accessories maximum, including lamp cover glass. Lamp guard glass may be replaced with solid glass accessory.
Labels
UL/cUL (Suitable for Damp Location), I B E W
Teflon®is a registered trademark of E.I. DuPont.
US Patent Pending
ob Inf
J
ob Name:
J
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
e r
W © 2005 Genlyte Gr
ormation Type:
ve the right to change details of design, materials and finish.
eser
oup LLC • B1105
.com
.lightolier
www
Calculite®ProSpec
®
Linear Downlight PA3A7050
Page 2 of 2 3 Light AR 70 Series A
Lighting Performance Data
Aiming Angle: 30° 45° or 60° Horizontal 30° 45° or 60° Vertical
L Beam length B Beam width C Distance to center of beam D Distance A Aiming angle FC Foot candles
Lamp data shown is typical, and is based on bare lamp photometrics. Contact lamp manufacturers for availability and performance.
Lamp 0° Aiming Angle 30° Aiming Angle 45° Aiming Angle 60° Aiming Angle
Lamps
50W AR70
SP (T
50W AR70
FL (T
50W AR70
SP GOLD (T-H) 10°
50W AR70
FL GOLD (T-H) 30°
50W AR111
NSP (T-H)
50W AR111
FL (T-H) 30°
Beam Spread
o 50% CBCP) Life (Hrs.)
(T
-H) 10°
-H) 30°
15000
13500 2000
50000 2000
Rated
CBCP
2000
2000 2000
1800 2000
3000 2000
DFC L W
234
8’ 12’ 16’ 20’
4’ 125 2.1’ 2.1’’
6’ 56 3.2’ 3.2’
8’ 31 4.3’ 4.3’ 10’ 20 5.4’ 5.4’
8’ 211 1.4’ 1.4’ 12’ 94 2.1’ 2.1’ 16’ 53 2.8’ 2.8’ 20’ 34 3.5’ 3.5’
4’ 125 2.1’ 2.1’’
6’ 56 3.2’ 3.2’
8’ 31 4.3’ 4.3’ 10’ 20 5.4’ 5.4’
15’ 222 1.3’ 1.3’ 20’ 125 1.7’ 1.7’ 25’ 80 2.2’ 2.2’ 30’ 56 2.6’ 2.6’
6’ 83 3.2’ 3.2’ 8’ 47 4.3’ 4.3’
10’ 30 5.4’ 5.4’ 12’ 21 6.4’ 6.4’
1.4’ 1.4’
104
2.1’ 2.1’ 59 2.8’ 2.8’ 38 3.5’ 3.5’
DC FC L W
7’ 4.0’ 199 1.6’ 1.4’ 10’ 5.8’ 97 2.3’ 2.0’ 13’ 7.5’ 58 3.0’ 2.6’ 16’ 9.2’ 38 3.7’ 3.2’
3’ 1.7’ 144 2.2’ 1.9’
5’ 2.9’ 52 3.7’ 3.1’
7’ 4.0’ 27 5.1’ 4.3’
9’ 5.2’ 16 6.6’ 5.6’
7’
4.0’ 199 1.6’ 1.4’ 10’ 5.8’ 97 2.3’ 2.0’ 13’ 7.5’ 58 3.0’ 2.6’ 16’
9.2’ 38 3.7’ 3.2’
3’ 1.7’ 144 2.2’ 1.9’ 5’ 2.9’ 52 3.7’ 3.1’ 7’ 4.0’ 27 5.1’ 4.3’ 9’ 5.2’ 16 6.6’ 5.6’
10’ 5.8’ 325 1.2’ 1.0’ 15’ 8.7’ 144 1.7’ 1.5’ 20’ 11.5’ 81 2.3’ 2.0’ 25’ 14.4’ 52 2.9’ 2.5’
5’ 2.9’ 78 3.7’ 3.1’ 7’ 4.0’ 40 5.1’ 4.3’ 9’ 5.2’ 24 6.6’ 5.6’
11’ 6.4’ 16 8.1’ 6.6’
DC FC L W
5’
5.0’ 212 1.8’ 1.2’
7’
7.0’ 108 2.5’ 1.7’
9’ 9.0’ 65 3.2’ 2.2’
11’ 11.0’ 44 3.9’ 2.7’
3’ 3.0’ 79 3.5’ 2.3’ 4’ 4.0’ 44 4.6’ 3.0’ 5’ 5.0’ 28 5.8’ 3.8’ 6’ 6.0’ 20 6.9’ 4.5’
5’ 5.0’ 191 1.8’ 7’ 7.0’ 97 2.5’ 1.7’ 9’ 9.0’ 59 3.2’ 2.2’
11’ 11.0’ 39 3.9’ 2.7’
3’ 3.0’ 71 4’ 4.0’ 40 4.6’ 3.0’ 5’ 5.0’ 25 5.8’ 3.8’ 6’ 6.0’ 18 6.9’ 4.5’
8’ 8.0’ 276 1.4’ 1.0’ 12’ 12.0’ 123 2.1’ 1.5’ 16’ 16.0’ 69 2.8’ 2.0’ 20’ 20.0’ 44 3.5’ 2.5’
3’ 3.0’ 118 3.5’ 2.3’ 5’ 5.0’ 42 5.8’ 3.6’ 7’ 7.0’ 22 8.1’ 5.3’ 9’ 9.0’ 13 10.4’ 6.8’
3.5’ 2.3’
60°
DC FC L W
3’
5.2’ 208 2.1’ 1.0’
4’
6.9’ 117 2.9’ 1.4’
5’
8.7’ 75 3.6’ 1.7’
10.4’
6’
1’ 1.7’ 2’
3.5’ 63 5.5’ 2.1’ 3’ 5.2’ 28 8.2’ 3.2’ 4’ 6.9’ 16 10.9’ 4.3’
3’ 5.2’ 188 2.1’ 1.0’
1.2’ 4’
6.9’ 105 2.9’ 1.4’
5’
8.7’ 68 3.6’ 1.7’
6’ 10.4’ 47 4.3’ 2.1’
1’ 1.7’ 225 2.7’ 1.1’ 2’ 3.5’ 56 5.5’ 2.1’ 3’ 5.2’ 25 8.2’ 3.2’ 4’ 6.9’ 14 10.9’ 4.3’
5’ 8.7’ 250 1.8’ 0.9’ 8’ 13.9’ 98 2.6’ 1.4’
11’ 19.1’ 52 3.9’ 1.9’ 14’ 24.2’ 32 4.9’ 2.4’
2’ 3.5’ 94 5.5’ 2.1’ 3’ 5.2’ 42 8.2’ 3.2’ 4’ 6.9’ 23 10.9’ 4.3’ 5’ 8.7’ 15 13.7’ 5.4’
52 4.3’ 2.1’
250 2.7’ 1.1’
e based on bare lamp photometrics.
Data ar Dashed lines in beam spreads indicate narrow axes of oval shaped beams.
FC is initial footcandles at center of beam. L and W are to the point that the candlepower
drops 50% of maximum.
Job Information Type:
.lightolier
Lightolier a Genlyte Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
ve the right to change details of design, materials and finish.
eser
e r
W © 2005 Genlyte Gr
oup LLC • B1105
www
.com
Loading...